Kramer TP-185 Manuel utilisateur

Kramer Electronics, Ltd.

USER MANUAL

Model:

TP-185

8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

Contents

1Introduction 1

2Getting Started 1

2.1 Quick Start 2

3Overview 3

3.1 Shielded Twisted Pair/Unshielded Twisted Pair 3

4Defining the TP-185 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter 4

5Installing the TP-185 in a Rack 6

6Connecting and Configuring the TP-185 7

6.1 Connecting the TP-185 7

6.2 Connecting to the TP-185 via an RS-232 Connection 8

6.3 Connecting to the TP-185 via an RS-485 Connection 8

6.4 Connecting Multiple TP-185 Units via the RS-485 Bus 9

7Setting the DIP-switches on the TP-185 10

7.1.1 Setting the RS-485 Bus Termination 10

7.1.2 Enabling and Disabling the Reply Feature 10

7.1.3 Setting the Reply Source or Machine Number 11

7.1.4 Setting the RS-232/RS-485 Baud Rate DIP-switches 12

7.1.5 Selecting Hardware/Software Mode 12

8Wiring the Twisted Pair RJ-45 Connectors 13

9Technical Specifications 14

10 Default Communication Parameters 14

10.1 Kramer Communication Protocol 2000 15

Figures

Figure 1: TP-185 Front and Rear Panels 4

Figure 2: Connecting the TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter 7

Figure 3: Connecting Multiple TP-185 Units via RS-485 9

Figure 4: TP-185 DIP-switch RS-485 Termination 10

Figure 5: TP-185 Reply Enable and Disable DIP-switch 10

Figure 6: TP-185 Reply Source or Machine Number DIP-switches 11

Figure 7: TP-185 Baud Rate DIP-switches 12

Figure 8: TP-185 Baud Rate Hardware/Software DIP-switch 12

Figure 9: CAT 5 Pinout 13

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

Tables

Table 1: TP-185 Front and Rear Panel Features 5

Table 2: Hardware Mode Reply Source DIP-switch Setting 11

Table 3: Software Mode RS-485 Machine Number DIP-switch Setting 11

Table 4: Serial Port Baud Rate DIP-switch Setting 12

Table 5: UTP Connector Pinout 13

Table 6: Technical Specifications of the TP-185 14

Table 7: TP-185 Communication Parameters 14

Table 8: Protocol Command Definition 15

Table 9: Instruction Codes for the TP-185 16

Table 10: Sample TP-185 Control Commands 16

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing

a world of unique, creative, and affordable solutions to the vast range of problems

that confront the video, audio, presentation, and broadcasting professional on a daily

basis. In recent years, we have redesigned and upgraded most of our line, making the

best even better! Our 1,000-plus different models now appear in 11 groups1

Congratulations on purchasing your TP-185,8 Channel UXGA/Audio/RS-232 to

CAT 5 Transmitter, which is ideal for the following typical applications:

that are

clearly defined by function.

•Transmission of video, audio and RS-232 signals for extended distances over

standard STP/UTP cables

•Multimedia and presentation source and acceptor selection

The package includes the following items:

•TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

•Power cord2, rack “ears” and this user manual3

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high-resolution cables4

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards

Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers;

GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra

Products

2 We recommend that you use only the power cord that is supplied with this machine

3 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com

4 The complete list of Kramer cables is available from http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Overview

3 Overview

The TP-185 is a high performance, 8 channel VGA/UXGA1

In particular, the TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

features:

, audio and RS-232 to CAT 5

transmitter for high resolution video, stereo unbalanced audio and RS-232 signals. The

CAT 5 outputs can be connected to any Kramer compatible TP receiver, for example, the

TP-126. The TP-185 can also route data from the RS-232 or RS-485 port to any of the

CAT 5 outputs.

•Eight UXGA video inputs

•Eight stereo unbalanced audio inputs on 3.5mm mini jacks

•Eight RJ-45 STP/UTP outputs

•Transmission of RS232/RS-485 data from one input to any or all of the eight

CAT 5 outputs, and one reply from the selected output

The TP-185 can differentiate between RS-232/RS-485 commands that control the unit

itself and commands that are destined for end-user equipment (see Section 7.1.5.2

The TP-185 is dependable, rugged, and fits into one vertical space (1U) of a standard

19” professional rack.

To achieve the best performance:

•Use only good quality connection cables2

•Do not secure the cables in tight bundles or roll the slack into tight coils

to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality, and position your Kramer TP-185 away from

moisture, excessive sunlight and dust

3.1 Shielded Twisted Pair/Unshielded Twisted Pair

We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels

of STP cable available, and we advise you to use the best quality STP cable that you can

afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where

skewing is not an issue. For cases where there is skewing, our UTP skew-free cable Kramer

BC-XTP, may be used. Bear in mind though, that we advise using STP cables where

possible, since the compliance to electromagnetic interference was tested using those

cables. Although Unshielded Twisted Pair (UTP) cable might be preferred for long range

applications, the UTP cable should be installed far away from electric cables, motors and so

on, which are prone to create electrical interference.

However, since the use of UTP cable might cause inconformity to electromagnetic

standards, Kramer does not commit to meeting the standard with UTP cable.

1 Up to and including WUXGA 1920 x 1200 resolution

2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Defining the TP-185 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

4 Defining the TP-185 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

Figure 1 and Table 1 define the front and rear panels of the TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter.

Figure 1: TP-185 Front and Rear Panels

Defining the TP-185 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

Table 1: TP-185 Front and Rear Panel Features

Feature

Function

1 POWER LED Lights green when the unit is turned on

VIDEO INPUT 15-pin HD

Connectors Connect to the VGA/UXGA video sources (from 1 to 8)

3 OUT STP/UTP RJ-45

Connectors Connect to the TP receivers (from 1 to 8)

4 AUDIO INPUT 3.5mm

Mini Jacks Connect to the unbalanced stereo audio sources (from 1 to 8)

5 RS-485 TERM DIP-switch Sets the termination of the RS-485 bus2: ON for RS-485 bus termination with 120Ω

(default), OFF for no RS-485 bus termination (see Section 7.1.1

6 )

SETUP DIP-switch

Reply DIP-switch 1 Enables and disables the Reply feature (see Section 7.1.2

Address DIP-switches 2,

3 and 4

)

Determines the reply source (hardware mode) or machine

number (software mode) see

Baud Rate DIP-switches

5, 6 and 7

Section 7.1.3

Determines the serial port baud rate (see Section 7.1.4

Hardware/Software

DIP-switch 8

)

Determines whether the data transmission path is set by

software or hardware (see Section 7.1.5

7 )

AC Mains Connector Connect to the AC mains power

8 AC Mains Fuse AC mains power fuse

9 AC Mains Power Switch Turns the unit power ON or OFF

10 RS-232 Terminal Block Connect to a PC or remote controller (see Section 6.4

11 )

RS-485 Terminal Block Pins B (–) and A (+) are for RS-485; Pin G (Ground)may be connected to the shield of

the cable if required (see Section 6.3

12 )

FACTORY RESET Button Press and hold while powering up the unit to reset the data transmission setup to its

factory default value3(see Section 10

13 )

PROG Button For service use only

1 See item 9

2 The first and the last units on the RS-485 line should be terminated (on). Other units should be unterminated (off), see Section 7.1.1

3 Turn the unit off using the power switch and then turn it on while pressing the Factory Reset button. The unit will power up and load

its memory with the factory default definitions

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Installing the TP-185 in a Rack

5 Installing the TP-185 in a Rack

This section describes what to do before installing in a rack and how to rack mount

the TP-185.

Connecting and Configuring the TP-185

6 Connecting and Configuring the TP-185

This section comprises connecting:

•The TP-185 (see Section 6.1

•To the TP-185 via RS-232 (see

) Section 6.2

•To the TP-185 via RS-485 (see )

Section 6.3

•Multiple TP-185 units via RS-485 (see )

Section 6.4

6.1 Connecting the TP-185

)

To connect1the TP-185, as illustrated in the example2in Figure 2:

Figure 2: Connecting the TP-185, 8 Channel UXGA/Audio/RS-232 to CAT 5 Transmitter

1 You do not need to connect all inputs and outputs

2 Switch off the power on each device before connecting it to your TP-185. After connecting your TP-185, switch on its power and then

switch on the power on each device. DO NOT push in the rear panel Flash Program PROG button , it is only used for upgrading to the

latest Kramer firmware

Table des matières

Autres manuels Kramer Émetteur

Kramer

Kramer WP-110 Manuel utilisateur

Kramer

Kramer 622T Manuel utilisateur

Kramer

Kramer TP-410 Manuel utilisateur

Kramer

Kramer TP-145 Manuel utilisateur

Kramer

Kramer TP-580TD Manuel utilisateur

Kramer

Kramer WP-110xl Manuel utilisateur

Kramer

Kramer WP-789T Manuel utilisateur

Kramer

Kramer TP-205A Manuel utilisateur

Kramer

Kramer PT-2UT/R-KIT Manuel utilisateur

Kramer

Kramer F-121 Manuel utilisateur

Kramer

Kramer 691 Manuel utilisateur

Kramer

Kramer TP-580CT Manuel utilisateur

Kramer

Kramer WP-110xl Manuel utilisateur

Kramer

Kramer TP-102HD Manuel utilisateur

Kramer

Kramer TOOLS TP-104 Manuel utilisateur

Kramer

Kramer TP-125 Manuel utilisateur

Kramer

Kramer SID-X3N Manuel d'installation et d'exploitation

Kramer

Kramer F-121UK Manuel utilisateur

Kramer

Kramer SID-X1N Manuel utilisateur

Kramer

Kramer TP-114 Manuel utilisateur

Kramer

Kramer TP-205A Manuel utilisateur

Kramer

Kramer 650T Manuel utilisateur

Kramer

Kramer PT-572HDCP+ Manuel utilisateur

Kramer

Kramer TWA Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur