Kramer VA-1USB-T Manuel utilisateur

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

VA-1USB-T

USB Transmitter

VA-1USB-R

USB Receiver

P/N: 2900-300209 Rev 3

VA-1USB-T/VA-1USB-R –Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

2.4 Shielded Twisted Pair/Unshielded Twisted Pair 3

3Overview 4

4Defining the VA-1USB-T and VA-1USB-R USB Transmitter and Receiver 5

4.1 Defining the VA-1USB-T USB Transmitter 5

4.2 Defining the VA-1USB-R USB Receiver 6

5Connecting the VA-1USB-T and VA-1USB-R 8

5.1 Connecting to the product via RS-232 10

5.2 Setting the Device ID DIP-switch 10

5.3 Resetting the VA-1USB-T to Factory Default Settings 11

5.4 Resetting the VA-1USB-R to Factory Default Settings 11

6Using the Web Pages 12

6.1Accessing the VA-1USB-T/VA-1USB-R Embedded Web Pages 12

6.2 The System Tab 13

6.3 The Network Tab 15

6.4 The Functions Tab 16

7Wiring the Twisted Pair RJ-45 Connectors 18

8Technical Specifications 19

9Default Communication Parameters 20

Figures

Figure 1: VA-1USB-T USB Transmitter Front Panel 5

Figure 2: VA-1USB-T USB Transmitter Rear Panel 6

Figure 3: VA-1USB-R USB Receiver Front Panel 7

Figure 4: VA-1USB-R USB Receiver Rear Panel 7

Figure 5: Connecting the VA-1USB-T Transmitter and VA-1USB-R Receiver 8

Figure 6: Machine ID DIP-switch 10

Figure 7: Entering the IP Address in your Browser 12

Figure 8: Main Page System Tab 12

Figure 9: System Tab 13

Figure 10: Update Firmware Window 14

Figure 11: Warning Message 15

Figure 12: The Network Tab 15

Figure 13: Warning Message 15

Figure 14: The Functions Tab 16

Figure 15: Warning Message 17

Figure 16: TP Pinout Wiring 18

VA-1USB-T/VA-1USB-R - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Thank you for purchasing the Kramer MegaTOOLS®VA-1USB-T USB Transmitter

and VA-1USB-R USB Receiver which are ideal for:

Presentation and multimedia applications

Long range USB distribution for schools, hospitals, stores and security

installations

Each package includes the following items:

VA-1USB-T USB Transmitter and VA-1USB-R USB Receiver

2 Power adapters (5V DC)

IR Blaster cable

This user manual

VA-1USB-T/VA-1USB-R - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VA-1USB-T and VA-1USB-R away from moisture,

excessive sunlight and dust

This equipment is to be used only inside a building. It may be

connected only to other equipment that is installed inside a building

VA-1USB-T/VA-1USB-R - Getting Started

2.2 Safety Instructions

Caution:

No operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

2.4 Shielded Twisted Pair/Unshielded Twisted Pair

We recommend that you use Shielded Twisted Pair (STP) cable and stress that

the compliance to electromagnetic interference was tested using STP cable.

There are different levels of STP cable available and we advise you to use the

best quality STP cable that you can afford.

For the VA-1USB-T and VA-1USB-R pair we recommend the use of shielded,

twisted pair (STP), non-skew-free Kramer BC-STP cable.

VA-1USB-T/VA-1USB-R - Overview

3 Overview

The VA-1USB-T and VA-1USB-R are a high-performance, TP (Twisted Pair)

transmitter and receiver for communicating USB, bidirectional RS-232 data and

unidirectional IR signals over extended distances using CAT 5/6 cable.

The VA-1USB-T encodes USB signals and RS-232 data and transmits them over

CAT 5/6 cable as a TP signal. The VA-1USB-R decodes the signal from the TP

into USB signals and RS-232 data. The VA-1USB-R also acts as a 4-port USB

hub and receives IR signals for transmission back to the VA-1USB-T.

More specifically, the VA-1USB-T and VA-1USB-R support:

USB 2.0 high speed and USB 1.1 signals (bulk mode, not isochronous)

True Plug and Play operation without drivers

All major operating systems

Full duplex, bidirectional RS-232 transmission

Local and remote control of devices via the serial port

Operation up to 100m (328ft) apart

Web pages for maintenance and configuration

Automatic Ethernet speed selection

Up to 16 independent pairs of devices on a single network

VA-1USB-T/VA-1USB-R - Defining the VA-1USB-T and VA-1USB-R USB Transmitter and

Receiver

4 Defining the VA-1USB-T and VA-1USB-R

USB Transmitter and Receiver

This section defines the:

VA-1USB-T USB Transmitter (see Section 4.1)

VA-1USB-R USB Receiver (see Section 4.2)

4.1 Defining the VA-1USB-T USB Transmitter

In addition to encoding and transmitting the USB and RS-232 signals, the

VA-1USB-T outputs the IR signal received from the VA-1USB-R.

RS-232 commands and data flow bidirectionally allowing status requests and

control of a destination unit.

Figure 1 defines the front panel of the VA-1USB-T.

Figure 1: VA-1USB-T USB Transmitter Front Panel

Feature

Function

IR OUT 3.5mm Mini Jack

Connect the IR blaster

RS-232 9-pin D-sub Serial

Port Connector (F)

Connect to the serial controller

Note: The RS-232 link is bidirectional

RESET Button

Press to reset the device to factory default (see

Section 5.3)

LINK LED

Lights green when the TP link to the receiver is

established

ON LED

Lights green when the device is powered on

VA-1USB-T/VA-1USB-R - Defining the VA-1USB-T and VA-1USB-R USB Transmitter and

Receiver

Figure 2 defines the rear panel of the VA-1USB-T.

Figure 2: VA-1USB-T USB Transmitter Rear Panel

Feature

Function

USB HOST INPUT

Type B USB Connector

Connect to a USB host (see Section 5)

CAT 5/6 OUT RJ-45

Connector

Connect to the CAT 5/6 IN RJ-45 connector on the VA-1USB-R

(see Section 2.4)

MACHINE ID 4-way

DIP-switch

Use to set the device ID to pair with the receiver (see Section 5.2)

5V DC Power Connector

Connect to one of the supplied +5V DC power adapters. Center

pin positive

4.2 Defining the VA-1USB-R USB Receiver

The VA-1USB-R decodes the USB signal and RS-232 data from the TP link sent

from the VA-1USB-T. The receiver distributes the USB signal across four USB

ports (acting as a USB hub) and outputs the RS-232 data. The VA-1USB-R

receives an IR signal via its IR sensor and sends it over the TP link to the

VA-1USB-T.

Figure 3 defines the front panel of the VA-1USB-R.

VA-1USB-T/VA-1USB-R - Defining the VA-1USB-T and VA-1USB-R USB Transmitter and

Receiver

Figure 3: VA-1USB-R USB Receiver Front Panel

Feature

Function

IR Sensor

Receives IR signals from an IR transmitter

USB DEVICES 1~4

Type A USB Connectors

Connect to up to four USB devices

LINK

Button

Press to establish the TP link to the transmitter

LED

Lights green when the TP link to the transmitter is

established

ON LED

Lights green to indicate that the device is powered on

Figure 4 defines the rear panel of the VA-1USB-R.

Figure 4: VA-1USB-R USB Receiver Rear Panel

Feature

Function

CAT 5/6 IN RJ-45

Connector

Connect to the CAT 5/6 OUT RJ-45 connector on the rear panel of

the VA-1USB-T (see Section 2.4)

RS-232 9-pin D-sub

Serial Port Connector (F)

Connect to the device to be controlled via the serial link.

Note: The RS-232 link is bidirectional

MACHINE ID 4-way

DIP-switch

Use to set the device ID to pair with the transmitter (see

Section 5.2)

5V DC Power Connector

Connect to one of the supplied +5V DC power adapters. Center

pin positive

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kramer Émetteur

Kramer

Kramer SWT3-41-U-T Manuel utilisateur

Kramer

Kramer VP-5R Manuel utilisateur

Kramer

Kramer TP-210 Manuel utilisateur

Kramer

Kramer TP-580CT Manuel utilisateur

Kramer

Kramer DigiTOOLS KW-11T Manuel utilisateur

Kramer

Kramer VP-200XLT Manuel utilisateur

Kramer

Kramer 617T Manuel utilisateur

Kramer

Kramer TP-145 Manuel utilisateur

Kramer

Kramer WP-871xr Manuel utilisateur

Kramer

Kramer 611T Manuel utilisateur

Kramer

Kramer Cobra TS2 Manuel utilisateur

Kramer

Kramer PT-2UT/R-KIT Manuel utilisateur

Kramer

Kramer KW-14T Manuel utilisateur

Kramer

Kramer DIP-20 Manuel utilisateur

Kramer

Kramer TP-580TD Manuel utilisateur

Kramer

Kramer F-121 Manuel utilisateur

Kramer

Kramer 610T Manuel utilisateur

Kramer

Kramer WP-110 Manuel utilisateur

Kramer

Kramer TP-551N Manuel utilisateur

Kramer

Kramer 614T Manuel utilisateur

Kramer

Kramer 650T Manuel utilisateur

Kramer

Kramer Cobra T2 Manuel utilisateur

Kramer

Kramer TP-583Txr Manuel utilisateur

Kramer

Kramer TP-551N Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur