Burkert 8177 Manuel utilisateur

Operating Instructions

LEVEL TRANSMITTER

8177

4…20 mA/HART

Contents

1About this document

1.1Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3Symbolism used. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2For your safety

2.1Authorised personnel . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . 5

2.4General safety instructions . . . . . . . . . . . . . . . . . . . . 5

2.5Safety approval markings and safety tips . . . . . . . . . . 6

2.6CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.7Compatibility according to NAMUR NE 53 . . . . . . . . . 6

2.8Safety instructions for Ex areas . . . . . . . . . . . . . . . . . 6

3Product description

3.1Conﬁguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2Principle of operation . . . . . . . . . . . . . . . . . . . . . . . . 7

3.3Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.4Packaging,transport and storage . . . . . . . . . . . . . . . 8

4Mounting

4.1General instructions . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.2Mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . 12

5Connecting to power supply

5.1Preparing the connection . . . . . . . . . . . . . . . . . . . . . 18

5.2Connection procedure. . . . . . . . . . . . . . . . . . . . . . . . 19

5.3Wiring plan,single chamber housing . . . . . . . . . . . . . 20

5.4Switch on phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

6Set up with the indicating and adjustment module

6.1Short description . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.2Insert indicating and adjustment module. . . . . . . . . . . 22

6.3Adjustment system . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6.4Setup procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6.5Menu plan ultrasonic sensor . . . . . . . . . . . . . . . . . . . 31

6.6Saving the parameter adjustment data. . . . . . . . . . . . 33

7Maintenance and fault rectiﬁcation

7.1Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

7.2Remove interferences. . . . . . . . . . . . . . . . . . . . . . . . 34

8Dismounting

8.1Dismounting steps . . . . . . . . . . . . . . . . . . . . . . . . . . 36

8.2Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2LEVEL TRANSMITTER 8177 •4…20 mA/HART

Contents

32059-EN-081121

9Supplement

9.1Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

9.2Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Supplementary documentation

Information:

Supplementary documents appropriate to the ordered version come

with the delivery.You can ﬁnd them listed in chapter "Product

description".

LEVEL TRANSMITTER 8177 •4…20 mA/HART 3

Contents

32059-EN-081121

1About this document

1.1Function

This operating instructions manual provides all the information you

need for mounting,connection and setup as well as important

instructions for maintenance and fault rectiﬁcation.Please read this

information before putting the instrument into operation and keep this

manual accessible in the immediate vicinity of the device.

1.2Target group

This operating instructions manual is directed to trained qualiﬁed

personnel.The contents of this manual should be made available to

these personnel and put into practice by them.

1.3Symbolism used

Information,tip,note

This symbol indicates helpful additional information.

Caution:If this warning is ignored,faults or malfunctions can

result.

Warning:If this warning is ignored,injury to persons and/or serious

damage to the instrument can result.

Danger:If this warning is ignored,serious injury to persons and/or

destruction of the instrument can result.

Ex applications

This symbol indicates special instructions for Ex applications.

lList

The dot set in front indicates a list with no implied sequence.

àAction

This arrow indicates a single action.

1Sequence

Numbers set in front indicate successive steps in a procedure.

4LEVEL TRANSMITTER 8177 •4…20 mA/HART

1About this document

32059-EN-081121

2For your safety

2.1Authorised personnel

All operations described in this operating instructions manual must be

carried out only by trained specialist personnel authorised by the plant

operator.

During work on and with the device the required personal protective

equipment must always be worn.

2.2Appropriate use

LEVEL TRANSMITTER 8177 is a sensor for continuous level

measurement.

You can ﬁnd detailed information on the application range in chapter

"Product description".

Operational reliability is ensured only if the instrument is properly used

according to the speciﬁcations in the operating instructions manual as

well as possible supplementary instructions.

For safety and warranty reasons,any invasive work on the device

beyond that described in the operating instructions manual may be

carried out only by personnel authorised by the manufacturer.Arbitrary

conversions or modiﬁcations are explicitly forbidden.

2.3Warning about misuse

Inappropriate or incorrect use of the instrument can give rise to

application-speciﬁc hazards,e.g.vessel overﬁll or damage to system

components through incorrect mounting or adjustment.

2.4General safety instructions

This is a high-tech instrument requiring the strict observance of

standard regulations and guidelines.The user must take note of the

safety instructions in this operating instructions manual,the country-

speciﬁc installation standards as well as all prevailing safety

regulations and accident prevention rules.

The instrument must only be operated in a technically ﬂawless and

reliable condition.The operator is responsible for trouble-free

operation of the instrument.

During the entire duration of use,the user is obliged to determine the

compliance of the required occupational safety measures with the

current valid rules and regulations and also take note of new

regulations.

LEVEL TRANSMITTER 8177 •4…20 mA/HART 5

2For your safety

32059-EN-081121

2.5Safety approval markings and safety tips

The safety approval markings and safety tips on the device must be

observed.

2.6CE conformity

The instrument is in CE conformity with EMC (89/336/EWG), fulﬁls

NAMUR recommendation NE 21 and is in CE conformity with LVD (73/

23/EG).

Conformity has been judged according to the following standards:

lEMC:

-Emission EN 61326:1997 (class A)

-Susceptibility EN 61326:1997/A1:1998

lLVD:EN 61010-1:2001

2.7Compatibility according to NAMUR NE 53

With regard to compatibility,the NAMUR recommendation NE 53 is

fulﬁlled.This applies also to the corresponding indicating and

adjustment components.

The parameter adjustment of the basic sensor functions is independ-

ent of the software version.The range of available functions depends

on the respective software version of the individual components.

The software version of LEVEL TRANSMITTER 8177 can be

determined as follows:

lon the type label of the electronics

lvia the indicating and adjustment module

2.8Safety instructions for Ex areas

Please note the Ex-speciﬁc safety information for installation and

operation in Ex areas.These safety instructions are part of the

operating instructions manual and come with the Ex-approved

instruments.

6LEVEL TRANSMITTER 8177 •4…20 mA/HART

2For your safety

32059-EN-081121

3Product description

3.1Conﬁguration

The scope of delivery encompasses:

lLEVEL TRANSMITTER 8177 ultrasonic sensor

lDocumentation

-this operating instructions manual

-Operating instructions manual "Indicating and adjustment

module"(optional)

-if necessary,further certiﬁcates

LEVEL TRANSMITTER 8177 consists of the following components:

lTransducer with integrated temperature sensor

lHousing with electronics

lHousing cover,optionally available with indicating and adjustment

module

The components are available in diﬀerent versions.

Fig.1:LEVEL TRANSMITTER 8177

1Housing cover with integrated indicating and adjustment module (optional)

2Housing with electronics

3Process ﬁtting with transducer

3.2Principle of operation

LEVEL TRANSMITTER 8177 is an ultrasonic sensor for continuous

level measurement.It is suitable for liquids and solids in virtually all

industries,particularly in the water and waste water industry.

Scope of delivery

Components

Application area

LEVEL TRANSMITTER 8177 •4…20 mA/HART 7

3Product description

32059-EN-081121

The transducer of the ultrasonic sensor transmits short ultrasonic

pulses to the measured product.These pulses are reﬂected by

product surface and received again by the transducer as echoes.The

running time of the ultrasonic pulses from emission to reception is

proportional to the distance and hence the level.The determined level

is converted into an appropriate output signal and outputted as

measured value.

Two-wire electronics 4…20 mA/HART for power supply and

measured value transmission over the same cable.

The supply voltage range can diﬀer depending on the instrument

version.

The data for power supply are speciﬁed in chapter "Technical data".

The backlight of the indicating and adjustment module is powered by

the sensor.Prerequisite is a certain level of supply voltage.

The data for power supply are speciﬁed in chapter "Technical data".

3.3Operation

LEVEL TRANSMITTER 8177 can be adjusted with diﬀerent adjust-

ment media:

lwith indicating and adjustment module

lWith a HART handheld

The entered parameters are generally saved in LEVEL TRANS-

MITTER 8177,optionally also in the indicating/adjustment module.

3.4Packaging,transport and storage

Your instrument was protected by packaging during transport.Its

capacity to handle normal loads during transport is assured by a test

according to DIN EN 24180.

The packaging of standard instruments consists of environment-

friendly,recyclable cardboard.For special versions,PE foam or PE foil

is also used.Dispose of the packaging material via specialised

recycling companies.

Transport must be carried out under consideration of the notes on the

transport packaging.Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt.Ascertained transit damage or

concealed defects must be appropriately dealt with.

Functional principle

Power supply

Packaging

Transport

Transport inspection

8LEVEL TRANSMITTER 8177 •4…20 mA/HART

3Product description

32059-EN-081121

Up to the time of installation,the packages must be left closed and

stored according to the orientation and storage markings on the

outside.

Unless otherwise indicated,the packages must be stored only under

the following conditions:

lNot in the open

lDry and dust free

lNot exposed to corrosive media

lProtected against solar radiation

lAvoiding mechanical shock and vibration

lStorage and transport temperature see chapter "Supplement -

Technical data -Ambient conditions"

lRelative humidity 20 …85 %

Storage

Storage and transport

temperature

LEVEL TRANSMITTER 8177 •4…20 mA/HART 9

3Product description

32059-EN-081121

4Mounting

4.1General instructions

Select an installation position you can easily reach for mounting and

connecting as well as later retroﬁtting of an indicating and adjustment

module.The housing can be rotated by 330°without the use of any

tools.You can also install the indicating and adjustment module in four

diﬀerent positions (each displaced by 90°).

Use the recommended cables (see chapter "Connecting to power

supply")and tighten the cable gland.

You can give your instrument additional protection against moisture

penetration by leading the connection cable downward in front of the

cable entry.Rain and condensation water can thus drain oﬀ.This

applies mainly to outdoor mounting as well as installation in areas

where high humidity is expected (e.g.through cleaning processes)or

on cooled or heated vessels.

Fig.2:Measures against moisture penetration

The reference plane for the measuring range is the lower edge of the

transducer.

Make sure that a min.distance -the so called dead zone -below the

reference plane is maintained in which a measurement is not possible.

The exact value of the dead zone is stated in chapter "Technical data".

Mounting position

Moisture

Measuring range

10 LEVEL TRANSMITTER 8177 •4…20 mA/HART

4Mounting

32059-EN-081121

Table des matières

Langues :

Autres manuels Burkert Émetteur

Burkert

Burkert 8175 Manuel utilisateur

Burkert

Burkert SE56 Mode d'emploi

Burkert

Burkert 8022 Series Manuel utilisateur

Burkert

Burkert 8619 multiCELL WM AC Manuel utilisateur

Burkert

Burkert 8045 Manuel utilisateur

Burkert

Burkert 8137 Manuel utilisateur

Burkert

Burkert 8316 Manuel utilisateur

Burkert

Burkert 8225 Manuel utilisateur

Burkert

Burkert SE56 Manuel utilisateur

Burkert

Burkert 8025 Series Manuel utilisateur

Burkert

Burkert 8045 Manuel utilisateur

Burkert

Burkert 8081 Manuel utilisateur

Burkert

Burkert 8035 Manuel utilisateur

Burkert

Burkert SE58 L Manuel utilisateur

Burkert

Burkert 8175 Manuel utilisateur

Burkert

Burkert SE56 Manuel utilisateur

Burkert

Burkert 8206 Manuel utilisateur

Burkert

Burkert 8311 Manuel utilisateur

Burkert

Burkert 8285 Manuel utilisateur

Burkert

Burkert 8138 Manuel utilisateur

Burkert

Burkert 8025 Series Manuel utilisateur

Burkert

Burkert 8285 Manuel utilisateur

Burkert

Burkert 8225 Manuel utilisateur

Burkert

Burkert SE58 M Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur

Excalibur

Excalibur SoundMaster FM Transmitter 144 Manuel utilisateur