CYP CH-507TXWPUS Manuel utilisateur

CH-507TXWPUS

HDMI over CAT5e/6/7 Wall-Plate Transmitter with IR/

RS232/LAN/PoE

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 30/09/13 Preliminary Release

RDV2 25/07/19 Update Format and Cable

Distance

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Hardware Description ........................... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

6.3 RS-232 Pin Denitions........................3

7. Connection Diagram ............................ 4

8. Specications ........................................ 5

8.1 Cable Specications .......................6

1. INTRODUCTION

The HDMI over CAT5e/6/7 Wall-Plate Transmitter can transmit

uncompressed audio/video over a single run of CAT5e/6/7 cable up

to 100m/328ft at 1080p and 70m/229ft at 4K with PoC, IR, RS232 and

LAN. of a data transmission rate of 100Mbps 100m/328ft at 1080p and

70m/229ft at 4K. A True HDBaseT 5Play solution to make your home or

ofce more efcient and easy with control.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1 x HDMI to CAT5e/6/7 with IR/RS232/LAN/PoE Transmitter

• 1 x IR Blaster

• 1 x 24V/1.25A DC Power Supply

• 1 x Operation Manual

4. SYSTEM REQUIREMENTS

Input HDMI source equipment such as DVD/Blu-ray(4K2K) player and

CAT5e/6/7 to HDMI receiver.

5. FEATURES

• HDMI 1.x and DVI 1.0 compliant

• HDCP compliant

• Supports HDMI 3D and 4K x 2K features

• Supports HDCP repeater and CEC bypass

• Supports distance up to 100m/328ft at 1080p and 70m/229ft at 4K

through CAT5e/6/7 cable

• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz(

YUV 4:4:4, 8-bit)

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

and Bitstream over HDMI

• HDBaseT 5Play convergence: uncompressed high denition Video

and Audio, LAN serving, Power over Cable and RS232/IR Controls

• US 2 gang wall-plate design

6. HARDWARE DESCRIPTION

The following sections describe the hardware components of the unit.

6.1 Front Panel

LAN

HDMI IN

RS-232 IN

POWER LINK

IR 1

Blaster

IR 2

Extender

DC 24V

6 7 8

1LAN: Connect to an active network for LAN serving and Telnet/

Web GUI control.

When the transmitter or any compatible LAN equipped receivers

are connected to a network, this allows the network access

(including internet access if available) to be shared between the

transmitter and all connected receiver. Connect any Ethernet

equipped device e.g. a Smart TV or games console to the LAN

port of a receiver for that device to share the network/internet

access.

2RS-232 IN: This slot is connect with D-Sub 9-pin cable from PC/

Laptop device RS-232 commands sending.

3DC 24V: Connect the power adaptor included in the package

and then connect to AC power to activate the device..

4POWER LED: This LED will illuminate when the device is connected

to a power supply.

5LINK LED: This LED will illuminate when the both CAT5e/6/7 input

and output signal is connected.

6IR 2 Extender: This slot is to connect with the IR Receiver cable

included in the package for IR signal receiving.

7IR 1 Blaster: This slot is to connect with the IR Blaster cable included

in the package for IR signal transmitting.

8HDMI IN: This slot is to connect with HDMI source equipment such

as DVD/Blu-ray player with HDMI source signal.

6.2 Rear Panel

1CAT5e/6/7 OUT: Connect to CAT5e/6/7 to HDMI Receiver for signal

extending.

6.3 RS-232 Pin Denitions

Pin Dene TX/RX

1 N/C

2TxD/RxD

3RxD/TxD

4 N/C

5 GND

6 N/C

7 N/C

8 N/C

9 N/C

7. CONNECTION DIAGRAM

1.5m

60°

1.5m

60°

LAN

HDMI OUT

RS-232 OUT

POWER LINK

IR 1

Extender

IR 2

Blaster

LAN

HDMI IN

RS-232 IN

POWER LINK

IR 1

Blaster

IR 2

Extender

DC 24V

RS-232 Equipped PC

or Notebook

Internet Modem or

Router

CAT5e/6/7

Power

Supply

DVD or Blu-ray

Player

TV or Monitor

Notebook

RS-232 Equipped

HDMI Switcher

IR Blaster

CAT5e/6/7

IR Extender

RS-232

8. SPECIFICATIONS

Video Frequency 300MHz/9Gbps

Input Ports 1 x HDMI, 1 x IR Extender, 1 x LAN, 1 x RS232

Output Ports 1 x IR Blaster, 1 x CAT5e/6/7

IR Frequency 30 - 50kHz (30 - 60kHz under ideal conditions)

Baud Rate up to 115200/sec

Power Supply 24V / 1.25A DC (US/EU standards, CE/FCC/

UL certied)

ESD Protection Human body model:

±8kV (air-gap discharge)

±4kV (contact discharge)

Dimensions (mm) 145.7(W) x 85.7(D) x 36.5(H)/Excluding Jacks

145.7(W) x 85.7(D) x 36.5(H)/Including Jacks

Weight(g) 352

Chassis Material Metal

Silkscreen Color White

Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C~60˚C / -4˚F ~ 140˚F

Relative Humidity 20~90% RH (no condensation)

Power Consumption (W) 7W

Autres manuels pour CH-507TXWPUS

Table des matières

Autres manuels CYP Émetteur

CYP

CYP CH-507TXBD: CH-507RXBD Manuel utilisateur

CYP

CYP VEX-X1102T-B0C Manuel utilisateur

CYP

CYP CH-1527TXV Manuel utilisateur

CYP

CYP PUV-1630TTX Manuel utilisateur

CYP

CYP PUV-1210PL-TX Manuel utilisateur

CYP

CYP CH-2603TX Manuel utilisateur

CYP

CYP CH-506RXWP Manuel utilisateur

CYP

CYP CH-527TXVBD Manuel utilisateur

CYP

CYP PU-103 Manuel utilisateur

CYP

CYP AVX-101F-TX Manuel utilisateur

CYP

CYP CHDBT-1H3CE Manuel utilisateur

CYP

CYP CH-2538TXM-TB Manuel utilisateur

CYP

CYP CH-1103TX Manuel utilisateur

CYP

CYP PU-507-KIT Manuel utilisateur

CYP

CYP CH-2527TX Manuel utilisateur

CYP

CYP CH-2602TXWPUS Manuel utilisateur

CYP

CYP CH-2606TX Manuel utilisateur

CYP

CYP PU-8H8CTXIR Manuel utilisateur

CYP

CYP VEX-T1201T Manuel utilisateur

CYP

CYP CH-A320TX Manuel utilisateur

CYP

CYP PUV-3050TX-UA Manuel utilisateur

CYP

CYP CH-2527TXPL Manuel utilisateur

CYP

CYP PU-515PLTX-1H Manuel utilisateur

CYP

CYP PUV-1510TX Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur