CYP CH-516TXAS Manuel utilisateur
CH-516TXAS
PC/CV Scaler over CAT5e/6/7 Transmitter with LAN/
RS-232/IR/Bidirectional PoE
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology. All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 01/11/13 Preliminary release
VS1 09/10/13 Updated text/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel.........................................3
6.2 Rear Panel .........................................4
6.3 Remote Control.................................5
6.4 IR Cable Pin Assignment ..................5
6.5 RS-232 Pin Denitions ........................6
6.6 RS-232 Commands............................7
6.7 OSD Menu..........................................9
6.8 Input Resolutions Support...............11
7. Connection Diagram .......................... 12
8. Specications ...................................... 13
8.1 Technical Specications ................13
8.2 CAT5e/6/7 Cable Specication....14
9. Acronyms ............................................. 14
1
1. INTRODUCTION
The CH-516TXAS is an HDBaseT™ Transmitter Scaler supporting PC
or Composite Video (CV) input. It can scale and switch the video
sources, and send the digitalized signal over a single run of CAT5e/6/7
cable to the Receiver at a distance up to 100 meters, along with an
external audio input, 2-way IR, RS-232 and bidirectional LAN serving.
Control is via on-panel buttons or IR remote control and there is an
On-screen Display (OSD) providing selection and system information.
The device provides a full range of output resolutions, up to 1080p
and WUXGA (RB). The bidirectional Power over Ethernet (PoE) function
provides greater exibility in installations.
2. APPLICATIONS
• Analog to Digital video signal conversion
• Up scale standard denition video to High-Denition TVs/displays
• Extend the operating distance of a CV/PC video signal
• Lecture room/Showroom/Meeting room/Classroom display and
control
3. PACKAGE CONTENTS
• CV/PC to CAT5e/6/7 with LAN/IR/RS-232/Bidirectional PoE Transmitter
• 1×IR Extender
• 1×IR Blaster
• 24 V/2.7 A DC Power Adaptor
• Remote Control (CR-128)
• Operation Manual
4. SYSTEM REQUIREMENTS
CV/PC source equipment such as a DVD/Video player or PC/Laptop
and output to HDBaseT compatible Receiver.
2
5. FEATURES
• Supports PC/CV scaling to a full range of HDTV or PC resolutions up
to 1080p and WUXGA (RB)
• Transmission of uncompressed data over a single CAT5e/6/7 cable
up to 100m/328ft
• 5Play™ convergence: Video and Audio, LAN serving, bidirectional
Power over Ethernet (PoE) and Control (IR/RS-232 bypass)
• Supports IR, Remote control, RS-232 (bypass) and on-panel controls
• Provides bidirectional 24V DC power to or receive from compatible
PoE Receiver through CAT5e/6/7 cable
• Supports Ethernet transmission rates up to 100 Mbps
• Supports NTSC and PAL formats for Composite Video input
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of different specications.
2. The PoE function is designed for powering compatible Receiver
units only—non-PoE Receivers will need their own power supply.
Receivers from other brands may not be compatible.
3. DO NOT connect the LAN connection to the CAT5e/6/7 port.
Doing so may cause a power shutdown and may damage the
device.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC CV XGA
AUDIO
SERVICE
MEN
UE
NTER
-
+
720P
INPUT CV/PC
INPUT
2 3 4 5 6 8 91
7
1SERVICE: Reserved for manufacturer use only.
2IR RECEIVER WINDOW: Receives only the IR signal from the supplied
remote control for this device only.
3PC: Connect to a PC/Laptop source device with a D-Sub 15pin cable.
4CV: Connect to a composite video source such as a DVD/Video player.
5AUDIO: Connect to an analog stereo (L/R) audio source with a
3.5mm mini-jack cable.
6MENU: Press this button to enter the On-Screen Display (OSD) menu.
7INPUT (–) Button & CV/PC LED: Press the INPUT (−) button to toggle
between CV or PC inputs. When in CV mode the LED will be lit, off
when in PC mode.
8−/+: Use these buttons to navigate down and up in the on-screen
menu.
9ENTER: Press this button to conrm the selection.
Note:
Pressing '−' (MINUS) and ENTER simultaneously will immediately
switch the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch
the output resolution of the device to XGA (1024×768).
4
6.2 Rear Panel
IR
Blaster
IR
Extender
CAT5e/6 OUT
MODE
LINK
LANRS232 IN
DC 24V
POWER
21 3 4 5 6 7
1POWER LED: This LED will illuminate when the device is connected
to an active power supply.
2DC 24V: Connect the 24 V DC power supply to the unit and plug
the adaptor into an AC outlet. Only one unit requires powering if
both the Transmitter and Receiver are both PoE compatible.
3RS-232 IN: Connect to a PC or RS-232 control system with a D-Sub 9
pin male cable for the transmission of RS-232 commands.
4LAN: Connect to an active network for LAN serving. When any
compatible LAN equipped receivers are connected, this allows
the network access (including internet access if available) to
be shared between any connected LAN equipped receivers.
Connect any Ethernet equipped device e.g. a Smart TV or games
console to the LAN port of a receiver for that device to share the
network/internet access.
Warning: DO NOT connect the LAN connection to the CAT5e/6/7
port. Doing so may cause a power shutdown and may damage the
device.
5IR Blaster: Connect the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
6IR Extender: Connect the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
7CAT5e/6/7 OUT: Connect to the Receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver unit
that is connected with a TV/monitor that is displaying the signal.
5
6.3 Remote Control
1INPUT: Press this button to toggle
between the CV or PC input.
2EXIT: Press this button to exit the menu
or the current selection in the on-screen
menu.
3MENU: Press this button to enter into the
OSD menu.
4RESET: Press this button to return the
device to the factory default settings.
5AUTO ADJUST: Press this button to
optimize the positioning of the picture
(picture centering) on the screen.
6 OK & ▲▼◄►: Press 'OK' to conrm the
selection or use the directional buttons
to navigate the on-screen menus.
6.4 IR Cable Pin Assignment
3
1
3
1
2
2
Power
IR Blaster Signal
NC
IR Signal
Power
Ground
IR Extender
IR Blaster
CR-128
OK
INPUT
EXIT MENU
RESET AUTO
ADJUST
1
2
4
6
3
5
Table des matières
Autres manuels CYP Émetteur
CYP
CYP CA-HDMIAT Manuel utilisateur
CYP
CYP CHDBT-1H2CE Manuel utilisateur
CYP
CYP CH-1527TXPLV Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP PUV-1550S-RX Manuel utilisateur
CYP
CYP IP-A750TX Manuel utilisateur
CYP
CYP CH-A320TX Manuel utilisateur
CYP
CYP PUV-1630TTX Manuel utilisateur
CYP
CYP CA-HDMIAT Manuel utilisateur
CYP
CYP CH-331H-TX Manuel utilisateur
CYP
CYP PU-103 Manuel utilisateur
CYP
CYP CPLUS-12FTX Manuel utilisateur
CYP
CYP CH-1605TXV Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP CH-507TXWPUS Manuel utilisateur
CYP
CYP CH-2605TXV Manuel utilisateur
CYP
CYP PU-1109 Manuel utilisateur
CYP
CYP PUV-1510TX Manuel utilisateur
CYP
CYP CH-1529TXPLV Manuel utilisateur
CYP
CYP CH-507TX Manuel utilisateur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
