CYP CH-506RXWP Manuel utilisateur

DRAFT

CH-506TXWP & RXWP

HDMI & IR over Single CAT5e/CAT6

Operation Manual

DRAFT

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 June 2012

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

DRAFT

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 14/02/12 Preliminary Release

DRAFT

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Transmitter.........................................3

6.2 Receiver ............................................4

7. D-Sub 9 Pin Denitions........................... 5

8. Connection Diagram ............................ 6

9. Specications ........................................ 7

10. Acronyms ............................................. 8

DRAFT

1. INTRODUCTION

The device that can make your home or ofce more efcient, this unit

of HDMI over Single CAT5e/6 can transmit and receive uncompressed

audio/video, control through the built-in RS-232 and IR ports and

Power on Ethernet(POE) over 100M with all plate design. Hence, if you

want to make your home or ofce more efcient, get the HDMI & IR

over single CAT5e/CAT6 and prepare to be amazed.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• HDMI & IR over Single CAT5e/CAT6 Transmitter x 1

• HDMI & IR over Single CAT5e/CAT6 Receiver x 1

• IR Blaster x 1

• IR Receiver x 1

• 3.5Ø to RS-232 female cable x 1 for transmitter

• 3.5Ø to RS-232 male cable x 1 for receiver

• 24V/1.25A DC Power Adaptor x 1

• Operation Manual

4. SYSTEM REQUIREMENTS

Input HDMI source equipment such as DVD/Blue-Ray player and

output display with HDMI input jack.

DRAFT

5. FEATURES

• HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant

• Supports HDCP repeater and CEC bypass

• Simultaneously uncompressed data sending over a single

100M/328ft with CAT6 or CAT5e cable

• Uncompressed video 1080p, 60Hz, 36bits

• Audio support up to 7.1CH & Dolby TrueHD, DTS-HD

• 4Play™ convergence: HDMI, POE & Control (IR & RS232)

• Wall plate design and Installation Friendly

Note: This system was tested with CAT6/23AWG cable, so if using

cables of another type, results may vary.

DRAFT

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter

LINK

POWER

DC 24V

RS232

IR 2

IR 1

OUT

HDMI

RearFront

82 31 4

1RS-232 IN: This slot is to connect with 3.5Ø phone jack RS-232 cable

from PC/NB equipment for sending RS-232 commands.

2IR 2 IN: This slot is to connect with the IR receiver cable included in

the package for IR signal receiving.

3IR 1 OUT: This slot is to connect with the IR blaster cableincluded in

the package for IR signal transmitting.

4HDMI IN: This slot is to connect with HDMI source equipment such

as DVD/Blu-ray player.

5POWER LED: This green LED will illuminate when the device is

attached with power supply.

6LINK LED: This yellow LED will illuminate when the both CAT5e/6

input and output signal is connected.

7DC 24V: This slot is where you plug the 24V DC power supply into

the unit and connect the adaptor to an AC outlet.

8CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6

cable for transmission of all data signals.

DRAFT

6.2 Receiver

LINK

POWER

RS232

OUT

IR 1

IR 2

OUT

HDMI

OUT

RearFront

72 31 4

1RS-232 OUT: This slot is to connect with 3.5Ø phone jack RS-232

cable from device equipment for receiving RS-232 commands.

2IR 1 IN: This slot is to connect with the IR receiver cable included in

the package for IR signal receiving.

3IR 2 OUT: This slot is to connect with the IR blaster cableincluded in

the package for IR signal transmitting.

4HDMI OUT: This slot is to connect with HDMI TV/monitor for display

HDMI input source signal.

5Power LED: This green LED will illuminate when the device is

connected to a power supply.

6LINK LED: This yellow LED will illuminate when the both CAT5e/6

input and output signal is connected.

7CAT5e/6 In: This slot is to be connected with a single CAT5e/6

cable from transmitter side for data transmitting.

DRAFT

7. D-SUB 9 PIN DEFINITIONS

Pin Dene TX/RX

1 N/C

2TxD/RxD

3RxD/TxD

4 N/C

5 GND

6 N/C

7 N/C

8 N/C

9 N/C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CYP Émetteur

CYP

CYP CH-2602TXWPUS Manuel utilisateur

CYP

CYP CH-103TX Manuel utilisateur

CYP

CYP CH-352TX Manuel utilisateur

CYP

CYP PUV-1510TX Manuel utilisateur

CYP

CYP CH-501RX Manuel utilisateur

CYP

CYP PUV-1550S-RX Manuel utilisateur

CYP

CYP CH-1602TXR Manuel utilisateur

CYP

CYP CA-HDMIAT Manuel utilisateur

CYP

CYP CDPS-P313RTX Manuel utilisateur

CYP

CYP CH-2603TX Manuel utilisateur

CYP

CYP CH-1605TXV Manuel utilisateur

CYP

CYP CA-HDMIAT Manuel utilisateur

CYP

CYP CH-1529TXPLV Manuel utilisateur

CYP

CYP PU-507TX-1H Manuel utilisateur

CYP

CYP PUV-1210PL-TX Manuel utilisateur

CYP

CYP DCT-30TX Manuel utilisateur

CYP

CYP PUV-1620S-TX Manuel utilisateur

CYP

CYP PUV-1602TXWP Manuel utilisateur

CYP

CYP IP-7000TX Manuel d'installation

CYP

CYP VEX-X1102T-B0C Manuel utilisateur

CYP

CYP CH-2538TXM-TB Manuel utilisateur

CYP

CYP AVX-101F-TX Manuel utilisateur

CYP

CYP PU-8H8CTXIR Manuel utilisateur

CYP

CYP PU-1H7HBTL Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur