CYP CH-507TX Manuel utilisateur

CH-507TX & RX

HDMI over CAT5e/6/7 Transmitter and Receiver

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and is believed

to be accurate. Cypress Technology assumes no responsibility for any

infringements of patents or other rights of third parties which may result from

its use.

Cypress Technology assumes no responsibility for any inaccuracies that

may be contained in this document. Cypress also makes no commitment to

update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer ﬁ le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express written

permission and consent from Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are trademarks of

the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain, moisture

or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings

or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it

is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to

be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings

in the unit housing that provide ventilation and allow for suﬃ cient space

for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use to

avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

VS1 2012/02/29 First Release

VR2 2012/03/02 Added PoE support (Brand only)

VS3 2012/03/23 Amended PoE function and updated the connection

diagram and the speciﬁ cations table

VR4 2012/04/16 Added IR distance

VS5 2014/06/13 Updated texts/diagrams

VS6 2015/06/17 Amended the LAN connector of the front and rear panels

VS7 2016/04/26 Supplied IR blaster and extender to receiver's package

VS8 2019/07/25 Update Format and Cable Distance

VS9 2020/10/06 Updated manual layout and branding

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain, moisture

or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings

or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it

is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to

be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings

in the unit housing that provide ventilation and allow for suﬃ cient space

for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use to

avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

VS1 2012/02/29 First Release

VR2 2012/03/02 Added PoE support (Brand only)

VS3 2012/03/23 Amended PoE function and updated the connection

diagram and the speciﬁ cations table

VR4 2012/04/16 Added IR distance

VS5 2014/06/13 Updated texts/diagrams

VS6 2015/06/17 Amended the LAN connector of the front and rear panels

VS7 2016/04/26 Supplied IR blaster and extender to receiver's package

VS8 2019/07/25 Update Format and Cable Distance

VS9 2020/10/06 Updated manual layout and branding

CONTENTS

1. Introduction.............................................1

2. Applications ............................................1

3. Package Contents ..................................1

4. System Requirements............................1

5. Features...................................................2

6. Operation Controls and Functions .......3

6.1 Transmitter Front and Rear Panels ....3

6.2 Receiver Front and Rear Panels ........4

6.3 IR Cable Pin Assignment....................5

7. Connection Diagram ..............................6

8. Speciﬁ cations .........................................7

8.1 Cable Speciﬁ cations...........................8

9. Acronyms ................................................9

1. INTRODUCTION

The HDMI over CAT5e/6/7 Transmitter and Receiver set can send

uncompressed video/audio and IP data over an single run of CAT5e/6/7

cable up to 100m at 1080p and 70m at 4K. It has the added beneﬁ t of control

through the built-in RS-232 pass-through and 2-way IR control and a LAN

serving connection. Additionally, it has Power over Cable (PoC) functionality

that allows for greater ﬂ exibility in installations.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over CAT5e/6/7 Transmitter

• 1×HDMI over CAT5e/6/7 Receiver

• 1×IR Blaster (Accessory for Receiver)

• 1×IR Extender (Accessory for Receiver)

• 1×24 V/1.25A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source device such as a DVD/Blu-ray player and an HDMI equipped

display (TV or monitor).

1. INTRODUCTION

The HDMI over CAT5e/6/7 Transmitter and Receiver set can send

uncompressed video/audio and IP data over an single run of CAT5e/6/7

cable up to 100m at 1080p and 70m at 4K. It has the added beneﬁ t of control

through the built-in RS-232 pass-through and 2-way IR control and a LAN

serving connection. Additionally, it has Power over Cable (PoC) functionality

that allows for greater ﬂ exibility in installations.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over CAT5e/6/7 Transmitter

• 1×HDMI over CAT5e/6/7 Receiver

• 1×IR Blaster (Accessory for Receiver)

• 1×IR Extender (Accessory for Receiver)

• 1×24 V/1.25A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source device such as a DVD/Blu-ray player and an HDMI equipped

display (TV or monitor).

5. FEATURES

• HDMI 1.x and DVI 1.0 compliant

• HDCP compliant

• Supports HDMI 3D and 4K x 2K features

• Supports HDCP repeater and CEC bypass

• Supports distance up to 100m/328ft at 1080p and 70m/229ft at 4K through

CAT5e/6/7 cable

• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz(

YUV 4:4:4, 8-bit)

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, and

Bitstream over HDMI

• HDBaseT™ convergence: uncompressed high-deﬁ nition Video and Audio,

LAN serving, Power over Cable (PoC) and IR/RS-232 Control pass-

through

• Installation friendly

Notes:

1.This system was tested with CAT6/23AWG cables, results may vary with

cables of a diﬀ erent speciﬁ cation.

2. The PoC function is designed for powering compatible receiver units

only—non-PoC receivers will need their own power supply.

Receivers of another brand may not be compatible.

3. For playback of 4K2K HDMI source signals, a 4K2K capable display and

High Speed HDMI cables are required.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front and Rear Panels

RS-232 In

LAN

HDMI In HDMI to CAT5e/6 with LAN/IR/RS232

Transmitter

CAT5e/6 Out

Link

IR2 Extender

IR1 Blaster

DC 24V

Power

Front

2 31

Rear

4 5 6 7 8 9

1HDMI In: Connect to HDMI source equipment such as a DVD or Blu-ray

player.

2LAN: Connect to an internet or network connection.

3RS-232 In: Connect to a PC or laptop with D-sub 9-pin male cable for the

transmission of RS-232 commands.

4Power LED: This blue LED will illuminate when the transmitter is

connected to a power supply.

5DC 24V: Plug the 24 V DC power supply into the unit and connect the

adaptor to an AC outlet.

Note: Only the Transmitter unit needs to be powered and can power the

Receiver unit via PoC.

6IR1 Blaster: Connect to the IR Blaster cable for IR signal transmission.

Place the IR blaster in direct line-of-sight of the equipment to be

controlled.

7IR2 Extender: Connect to the IR Extender cable for IR signal reception.

Ensure that remote being used is within the direct line-of-sight of the IR

extender.

8Link LED: The yellow LED will illuminate when both the input and output

signals are connected.

9CAT5e/6 Out: Connect to the receiver unit with an single CAT5e/6/7

cable for transmission of all data signals.

RS-232 In

LAN

HDMI In HDMI to CAT5e/6 with LAN/IR/RS232

Transmitter

CAT5e/6 Out

Link

IR2 Extender

IR1 Blaster

DC 24V

Power

Front

2 31

Rear

4 5 6 7 8 9

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front and Rear Panels

RS-232 In

LAN

HDMI In HDMI to CAT5e/6 with LAN/IR/RS232

Transmitter

CAT5e/6 Out

Link

IR2 Extender

IR1 Blaster

DC 24V

Power

Front

2 31

Rear

4 5 6 7 8 9

1HDMI In: Connect to HDMI source equipment such as a DVD or Blu-ray

player.

2LAN: Connect to an internet or network connection.

3RS-232 In: Connect to a PC or laptop with D-sub 9-pin male cable for the

transmission of RS-232 commands.

4Power LED: This blue LED will illuminate when the transmitter is

connected to a power supply.

5DC 24V: Plug the 24 V DC power supply into the unit and connect the

adaptor to an AC outlet.

Note: Only the Transmitter unit needs to be powered and can power the

Receiver unit via PoC.

6IR1 Blaster: Connect to the IR Blaster cable for IR signal transmission.

Place the IR blaster in direct line-of-sight of the equipment to be

controlled.

7IR2 Extender: Connect to the IR Extender cable for IR signal reception.

Ensure that remote being used is within the direct line-of-sight of the IR

extender.

8Link LED: The yellow LED will illuminate when both the input and output

signals are connected.

9CAT5e/6 Out: Connect to the receiver unit with an single CAT5e/6/7

cable for transmission of all data signals.

6.2 Receiver Front and Rear Panels

CAT5e/6 In

Link

IR1 Extender

IR2 Blaster

Power

RS-232 Out

LAN

HDMI Out CAT5e/6 to HDMI with LAN/IR/RS232

Receiver

Rear

4 5 6 7 8

Front

2 31

1HDMI Out: Connect to a HDMI equipped TV/monitor for display of the

HDMI input source signal.

2LAN: Connect to a PC or Laptop to the Internet or network connection.

3RS-232 Out: Connect to the device that is to be controlled (via D-sub 9-pin

female cable) by RS-232 commands.

4Power LED: This blue LED will illuminate when the receiver is receiving

a power supply via PoC from a compatible transmitter unit.

5IR2 Blaster: Connect to the IR Blaster cable for IR signal transmission.

Place the IR blaster in direct line-of-sight of the equipment to be

controlled.

6IR1 Extender: Connect to the IR Extender cable for IR signal reception.

Ensure that remote being used is within the direct line-of-sight of the IR

extender.

7Link LED: The yellow LED will illuminate when both the input and output

signals are connected.

8CAT5e/6 In: Connect to the transmitter unit with an single CAT5e/6/7

cable for transmission of all data signals.

CAT5e/6 In

Link

IR1 Extender

IR2 Blaster

Power

RS-232 Out

LAN

HDMI Out CAT5e/6 to HDMI with LAN/IR/RS232

Receiver

Rear

4 5 6 7 8

Front

2 31

6.3 IR Cable Pin Assignment

IR Blaster

Cabl

Infrared

Power

Not Use

IR Extender

Cabl

Infrared

Power

Ground

PIN ASSIGNMENT (TX/RX)

1N/C

2TxD / RxD

3RxD / TxD

4N/C

5GND

6N/C

7N/C

8N/C

9N/C

Autres manuels pour CH-507TX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CYP Émetteur

CYP

CYP PUV-3050TX-UA Manuel utilisateur

CYP

CYP CH-331H-TX Manuel utilisateur

CYP

CYP PUV-1630TXWP-UK Manuel utilisateur

CYP

CYP PUV-1630TTX Manuel utilisateur

CYP

CYP CH-501RX Manuel utilisateur

CYP

CYP PU-8H8CTXIR Manuel utilisateur

CYP

CYP CHDBT-1H3CE Manuel utilisateur

CYP

CYP CHDBT-1H7CE Manuel utilisateur

CYP

CYP IP-7000TX Manuel d'installation

CYP

CYP CH-1106TX & RX Manuel utilisateur

CYP

CYP CH-1602TXR Manuel utilisateur

CYP

CYP CH-352TX Manuel utilisateur

CYP

CYP PUV-1630TXWP Manuel utilisateur

CYP

CYP PU-507TX-1H Manuel utilisateur

CYP

CYP CH-U331TX Manuel utilisateur

CYP

CYP CH-1107 TX Manuel utilisateur

CYP

CYP PU-1103 Manuel utilisateur

CYP

CYP PUV-3090TX-UEA Manuel utilisateur

CYP

CYP CH-527TXPLVBD Manuel utilisateur

CYP

CYP CH-506RXWP Manuel utilisateur

CYP

CYP DCT-30TX Manuel utilisateur

CYP

CYP PU-507-KIT Manuel utilisateur

CYP

CYP PUV-1630TXWP-EU Manuel utilisateur

CYP

CYP CDPS-P313RTX Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur