CYP PUV-1630TXWP Manuel utilisateur

PUV-1630TXWP

2x HDMI, 1x VGA over Single CAT5e/6/7

HDBaseT™ Wall Plate Transmitter

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/02/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................7

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions.......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 WebGUI Control .......................................11

6.4 Serial Control (Via Receiver).................20

6.5 Telnet Control............................................20

6.6 RS-232 and Telnet Commands............21

7. Connection Diagram .......................... 36

8. Specifications...................................... 37

8.1 Basic Specifications.................................37

8.2 Video Specifications................................38

8.3 Audio Specifications...............................40

8.4 Cable Specifications ...............................41

8.5 HDBaseT Features....................................42

9. Acronyms............................................. 42

1. INTRODUCTION

This HDBaseT Wall Plate Switch with Signal Management is an HDMI and

VGA switch with audio embedding and HDBaseT output. The wall plate

is designed for use with UK two-gang sized enclosures. This Transmitter

can send uncompressed high-denition video/audio over a single cable

up to a distance of 100 meters at 1080p@60Hz. The HDMI inputs support

resolutions up to 4K@60Hz (4:4:4, 8-bit) and the VGA input supports

resolutions up to WUXGA (RB). With the use of the 3.5mm audio input,

stereo audio may be embedded with VGA or DVI/HDMI sources as well.

Despite HDBaseT’s 10.2Gbps bandwidth limitation, high bandwidth 4K

UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit), can

be supported and will be automatically converted to 8-bit colour, or the

4:2:0 colour space when necessary.

Signal management features such as automatic switching based on input

signal and hot plug detection enable convenient hands-free operation.

A multi-function button on the face of the unit provides access to an

information OSD as well as allowing manual input selection. Additional

functionality such as EDID management, HDCP management and basic

signal event automation (which can send customised RS-232 or CEC

commands to external devices automatically) is also available.

This Transmitter may be powered locally or via 48V PoH from a compatible

HDBaseT Receiver, which allows for greater exibility in installations.

The unit can be controlled via the front panel button with OSD, WebGUI,

and Telnet. When paired with a compatible Receiver RS-232 control also

becomes available making it exceptionally versatile.

2. APPLICATIONS

Household entertainment sharing and control

Lecture halls, auditoriums and classroom

Houses of worship

Conference rooms and boardrooms

Hotel event spaces

3. PACKAGE CONTENTS

HDBaseT Wall Plate Switch (UK 2-Gang)

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI or VGA source equipment such as media players, video game

consoles, PCs, or set-top boxes.

A compatible HDBaseT Receiver is required. An HDBaseT Receiver

capable of suppling 48V PoH is recommended.

The use of “Premium High Speed” HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI 2.0 and DVI 1.0 compliant

HDCP 1.x and 2.2 compliant

2 HDMI inputs

1 VGA input with 3.5mm mini-jack audio input

Wall plate is designed for EU two-gang sized enclosures

Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)

Supports VGA input resolutions up to WUXGA (RB)

Analogue stereo audio may be embedded with VGA or DVI/HDMI

sources

HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit)

with automatic colour space conversion of 4K@50/60Hz (4:4:4, 8-bit)

or 4K@any (10/12-bit) sources

Supports CEC bypass

HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

and 48V PoH (PD)

HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K

when using Cat.6a/7

Supports pass-through of many audio formats including LPCM

2.0/5.1/7.1, Bitstream, and HD Bitstream

User activated information OSD

Supports manual input selection or automatic input selection with

hot plug detection

Basic signal event automation (via RS-232 or CEC w/ compatible

Receiver)

Front panel LEDs indicate HDCP mode, input source, link state, and

power

Unit may be powered locally or via 48V PoH from a compatible

HDBaseT Receiver

Controllable via a multi-function front panel button with OSD, or via

WebGUI, Telnet, and RS-232 (w/ compatible Receiver only)

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PUV-1630TXWP-EU

7 8 9

2 3 4 5 6

1PWR LED: This LED will illuminate to indicate the unit is on and

receiving power.

2LINK LED: This LED will illuminate when the unit is on, receiving

power, and has successfully linked to a compatible Receiver.

3HDCP LED: This LED indicates the HDCP mode of the current input.

Green indicates Follow Display mode, orange indicates Follow Source

mode, off indicates HDCP support is disabled.

4VGA IN LED: This LED will illuminate when the VGA input is selected.

5Input Select: A short press of this button will switch between the

available inputs. Pressing and holding this button for 2 seconds will

activate the information OSD.

6HDMI IN 2 & 3 Ports and LEDs: Connect to HDMI source equipment

such as a media player, game console or set-top box. The appropriate

LED will illuminate when that HDMI input is selected.

7VGA IN 1 Port: Connect to VGA source equipment such as a PC or

laptop.

Audio In Port: Connect to the stereo analogue output of a device

such as a CD player or PC for embedding into the HDBaseT output.

8FAC. RESET Pinhole: Press and hold for 5 seconds to reset the unit to

its factory defaults.

9LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection and to control the unit.

6.2 Rear Panel

DC 12V

−

CAT5e/6/7 OUT

31 2

1DC 12V Port: Plug the 12V DC power adapter into this terminal block

and connect it to an AC wall outlet for power. (Optional)

Note: This connection is not required if the unit is receiving power via 48V

PoH from the Receiver.

2SERVICE Port: This port is reserved for rmware update use only.

3CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver with

a single Cat.5e/6/7 cable for transmission of all data signals. 48V PoH

will also be supplied when connected to a compatible PSE Receiver.

Note: The 48V PoH function is designed to receive power from compatible

Receiver units only. Other brands of Receiver may not be compatible.

Table des matières

Autres manuels CYP Émetteur

CYP

CYP CH-1529TXPLV Manuel utilisateur

CYP

CYP PU-607BD-TX Manuel utilisateur

CYP

CYP CH-501RX Manuel utilisateur

CYP

CYP PU-1109 Manuel utilisateur

CYP

CYP CH-331H-TX Manuel utilisateur

CYP

CYP PUV-1630TXWP-UK Manuel utilisateur

CYP

CYP CH-U331TX Manuel utilisateur

CYP

CYP PUV-1660TTX Manuel utilisateur

CYP

CYP CH-103TX Manuel utilisateur

CYP

CYP PUV-1510TX Manuel utilisateur

CYP

CYP PU-305BD-TX Manuel utilisateur

CYP

CYP PUV-1210PL-TX Manuel utilisateur

CYP

CYP VEX-T1201T Manuel utilisateur

CYP

CYP PU-1H7HBTL Manuel utilisateur

CYP

CYP CH-1602RX Manuel utilisateur

CYP

CYP CH-1107 TX Manuel utilisateur

CYP

CYP CH-507TX Manuel utilisateur

CYP

CYP PU-515PLTX-1H Manuel utilisateur

CYP

CYP PUV-1630TTX Manuel utilisateur

CYP

CYP PU-507TX-CVGA Manuel d'installation

CYP

CYP AVIP-P5104T-B1C Manuel utilisateur

CYP

CYP CH-1529TXV Manuel utilisateur

CYP

CYP CHDBT-1H7CE Manuel utilisateur

CYP

CYP COH-RX2 Manuel d'installation

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur