CYP PUV-3090TX-UEA Manuel utilisateur
PUV-3090TX-UEA & PUV-3090RX-UEA
UHD+ HDMI over HDBaseT3 Receiver with Analogue
Audio I/O, USB 2.0 & LAN
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use
to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
v1.00 2021/06/18 Preliminary release
CONTENTS
1. Introduction..................................................1
2. Applications ..................................................1
3. Package Contents .........................................2
3.1 Single Unit (Transmitter or Receiver) ...........2
3.2 Dual Unit Set .........................................................2
4. System Requirements ..................................2
5. Features.........................................................3
6. Operation Controls and Functions..............4
6.1 Front Panel (Transmitter)..................................4
6.2 Rear Panel (Transmitter)....................................5
6.3 Front Panel (Receiver) ........................................6
6.4 Rear Panel (Receiver)..........................................7
6.5 RS-232 Pinout........................................................8
6.6 IR Pinout..................................................................8
6.7 Audio Pinout .........................................................8
7. Connection Diagram ....................................9
8. Specications..............................................10
8.1 Technical Specications (Transmitter) ...... 10
8.2 Technical Specications (Receiver)............. 11
8.3 Video Specications......................................... 12
8.4 Audio Specications........................................ 14
8.4.1 Digital Audio ........................................... 14
8.4.2 Analogue Audio..................................... 14
8.5 Cable Specications ........................................ 15
8.6 HDBaseT Features............................................. 16
9. Acronyms.....................................................17
1
1. INTRODUCTION
This 4K UHD+HDMI over HDBaseT transmitter and receiver pair uses
HDBaseT 3.0, the newest generation of HDBaseT technology, and is
the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0,
4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7
cable over distances of up to 100 meters. Multiple control and data signals
may also be transmitted along with the audio and video, including bi-
directional IR, RS-232, USB 2.0, and Gigabit Ethernet.
When the transmitter and receiver are used together, 2 micro USB host
connections are available (1 on the transmitter, 1 on the receiver) for
connecting a single USB host (such as a laptop or PC) to devices on up to
4 USB 2.0 (Type-A) ports (2 on the transmitter, 2 on the receiver) forming a
highly exible KVM extension conguration. This transmitter and receiver
pair is ideal for use in any video extension scenario, but they excel when
latency-free, uncompressed, high resolution video is critical, such as
medical installations, live conferences, and education.
2. APPLICATIONS
Household entertainment sharing and control
Lecture hall/classroom display and control
Meeting room presentation and control
2
3. PACKAGE CONTENTS
3.1 Single Unit (Transmitter or Receiver)
1× UHD+HDMI over HDBaseT Transmitter or Receiver with USB KVM
1× 24V/2.7A DC Power Adapter (Transmitter only)
2× 3-pin Terminal Block
1× 8-pin Terminal Block
1× Operation Manual
3.2 Dual Unit Set
1× UHD+HDMI over HDBaseT Transmitter with USB KVM
1× UHD+HDMI over HDBaseT Receiver with USB KVM
1× 24V/2.7A DC Power Adapter
4× 3-pin Terminal Block
2× 8-pin Terminal Block
1× Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such a media player, video game console, or
set-top box.
HDMI receiving equipment such as an HDTV, monitor, or audio
amplier.
The use of Premium High Speed HDMI cables, and industry standard
Cat.6A or Cat.7 Ethernet cable is highly recommended.
3
5. FEATURES
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)
1 HDMI input, 1 HDMI output, and 1 HDBaseT output (Transmitter)
1 HDMI input, 1 HDMI output, and 1 HDBaseT input (Receiver)
Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
and output over both HDMI and HDBaseT
Supports Deep Colour input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Supports CEC bypass
HDBaseT extends video, audio and data over a single Cat.6A/7 cable
and can reach distances up to 100m/328ft
HDBaseT feature support: HD Video and Audio, Gigabit Ethernet, PoH
(Tx to Rx), Bi-directional audio (analogue), and Control (bi-directional
USB/IR/RS-232 pass-through)
2 USB 2.0 Type-A device ports and 1 Micro USB host port
Selectable HDMI audio extraction/analogue audio bypass functionality
Note: HDMI audio extraction is only available with LPCM 2.0 sources.
HDMI output functions as a local monitor (Transmitter only)
Transmitter can supply PoH to the connected receiver
Receiver is powered directly via PoH from the connected transmitter
Note: A compatible PSE transmitter providing PoH is required to power this
receiver. Transmitters from other brands may not be compatible.
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel (Transmitter)
LAN AUDIO IR
IN
OUT LR R PWRT
AUDIO
BYPASS
EXTRACT LINK
1 3 6 7 108
2
5
4 9
1LAN Port: Connect to Ethernet supporting devices or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
2AUDIO IN 3-pin Terminal Block: Connect to the analogue audio
output of a device such as a media player or game console using a
3-pin adapter cable. Audio is sent to the analogue audio output on
the connected compatible receiver.
3AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or
an amplier for analogue audio output using a 3-pin adapter cable.
Audio is sourced from the analogue audio input on the connected
compatible receiver.
4RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial
controllable device with a 4-pin adapter cable for the extension of
RS-232 signals between both ends of the HDBaseT connection.
5IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and
Extender using a 4-pin Y-adapter cable to transmit and receive IR
control signals and extend them to devices connected to the other
end of the HDBaseT connection.
6USB 2.0 Ports (Type-A): Connect directly to a standard USB device
such as a mouse, keyboard, or ash drive to extend their USB
functionality to the currently active Micro-USB host port.
7AUDIO Button: Press this button to toggle the transmitter’s analogue
audio stream source between the analogue audio input (bypass) and
the HDMI input’s audio (extract).
5
Note: HDMI audio extraction is only available with LPCM 2.0 sources.
Pressing this button will also change the setting on the receiver.
8BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the
unit is in audio bypass or extract mode.
9POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
10 LINK LED: This LED will illuminate solidly when a live connection with
a compatible receiver is active.
6.2 Rear Panel (Transmitter)
DC24V USB HDMI OUTHDMI INCAT6A/7 OUT
1 2 4 53
1DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
2USB 2.0 Port (Micro-B): Connect directly to a standard USB host such
as a PC or laptop to extend their USB functionality to all currently
connected USB devices on both ends of the HDBaseT connection.
Note: If USB hosts are connected to both the transmitter and receiver at
the same time, only the most recently connected host will be active.
3CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a
single Cat.6A/7 cable for extension of all data signals. PoH will also be
supplied to a connected compatible PD receiver.
Note: The PoH function is designed for powering compatible receiver units
only. Non-PoH receivers will need their own power supply. Receivers from
other brands may not be compatible.
4HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
5HDMI OUT port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CYP Émetteur
CYP
CYP Dante AU-DTI4-TX Manuel utilisateur
CYP
CYP DCT-30TX Manuel utilisateur
CYP
CYP CSI-8H8CVTX Manuel utilisateur
CYP
CYP CHDBT-1H2CE Manuel utilisateur
CYP
CYP AVX-101F-TX Manuel utilisateur
CYP
CYP PU-507-KIT Manuel utilisateur
CYP
CYP PU-305BD-TX Manuel utilisateur
CYP
CYP PUV-1510TX Manuel utilisateur
CYP
CYP CH-2603TX Manuel utilisateur
CYP
CYP PU-103 Manuel utilisateur
CYP
CYP PU-1109 Manuel utilisateur
CYP
CYP PUV-1210PL-TX Manuel utilisateur
CYP
CYP CH-U331TX Manuel utilisateur
CYP
CYP PU-501 Manuel utilisateur
CYP
CYP CH-331H-TX Manuel utilisateur
CYP
CYP EL-2600V Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP CH-103TX Manuel utilisateur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
