PEERLESS PLC Mode d’emploi

ISSUED:10-19-01 SHEET #: 200-9264-3 07-26-04

1 of 4

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

description qty. part #

Asupport arm retainer 1 590-1007

Badapter 1 590-1009

Cceiling support arm 1 100-1001

Dcover plate 1 100-1006

Eceiling arm box 1 100-1005

Ftilt hook box 1 200-1552

GM10 x 1.5 x 15 mm penta-pin screw 8 520-9263

Hretainer pin (long) 1 5M9-025-X02

Iretainer pin (short) 1 560-9643

Note: some parts may not appear exactly as illustrated.

Parts List: Secure Ceiling Mount

IMPORTANT: If you will install an extension

column, DO NOT INSTALL THIS PIPE. Begin with

step 2.

Thread threaded, notched pipe (J) into threaded fitting

in ceiling plate (M). Tighten four or five complete turns

leaving slot aligned with one small hole in the side of

the ceiling plate (M) threaded fitting. Insert and tighten

one M5 x .8 x 1 penta-pin™screw (O) as shown. Use

the small penta-pin tool (Q) and a 1/4" driver to drive

screw (O).

description qty. part #

Jthreaded notched pipe 1 200-0008

Kadhesive vinyl (not shown) 1 600-1004

L#14 x 2.5 wood screw 4 5S1-015-C03

Mceiling plate 1 128-1039

Nceiling plate end cap 2 2PT-22CA01D

OM5 x .8 x 10 penta-pin screw 3 505-9010

Ppenta-pin tool™(large, not shown) 1 520-9260

Qpenta-pin tool (small, not shown) 1 520-9249

threaded

fitting

penta-pintool

Before you start check the parts list below to make sure all of the parts listed are included.

Installation and Assembly - Secure Ceiling Mount Model: PLC

IMPORIMPOR

IMPORTT

TANT!ANT!

ANT!ANT!

ANT! Read entire instruction sheet

before you start installation and assembly. IMPORIMPOR

IMPORIMPOR

IMPORTT

TANT!ANT!

ANT!ANT!

ANT! Installer must verify that the

ceiling will safely support the combined weight

of the screen and mounting hardware.

This product must be

installed by a qualified,

professional installer.

ISSUED:10-19-01 SHEET #: 200-9264-3 07-26-04

2 of 4

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

For Wood Joist Finished Ceiling, Exposed Wood

Joists, or Wood Beam Ceiling. (See step 3for

concrete ceilings). Drill four 5/32" (4 mm) dia. holes to a

minimum depth of 2.5" (64 mm) INTO JOIST CENTERS.

Attach ceiling plate (M) with four #14 x 2.5" wood

screws (L) using a 3/8"(10 mm) socket wrench.

Snap end caps (N) into place.

For Concrete Ceilings drill four 5/16" (8 mm) dia.

holes to a minimum depth of 1 3/4" (45 mm). Attach

ceiling plate (M) using concrete expansion anchors as

shown in 3-1 thru 3-4. Then snap end caps (N) into

place.

Align hole in ceiling plate with hole in ceiling.

Gently hammer in concrete anchor.

Use a 10 mm wrench to tighten concrete anchors

to 80 in. lb (9 N.M.) maximum torque to expand anchors.

3-1

3-2

3-3

3-4

• It is the responsibility of the installer to verify that the

ceiling will safely support the combined load of all

attachedhardwareandcomponents.

WARNING

• Always attach concrete expansion anchors directly to

load-bearingconcrete.

• Neverattachconcrete expansion anchors toconcrete

coveredwithplaster, drywall, or otherfinishingmaterial.

WARNING

• Tighten wood screws (L) so that ceiling plate (M) is

firmlyattached,butdonotovertighten. Overtightening

candamagescrews, greatly reducing theirholding

power.

• Never tighten in excess of 80 in. lb. (9 N.M.).

• Makresure that mounting screws are anchored into

the center of the joist. The use of an "edge to edge"

studfinderis highly recommended.

WARNING

3-1 3-2

FOR PRODUCT SAFETY USE ONLY RAWLTM #5005 OR

HILTITM HL814 CONCRETE ANCHORS. Order accessory

kit #ACC210 which contains four .312 x 1.625 (8 mm x

41 mm) concrete expansion anchors.

ISSUED:10-19-01 SHEET #: 200-9264-3 07-26-04

3 of 4

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

Thread adapter (B) onto end of threaded, notched

pipe (J) (or, for extension column applications, onto

end of extension column). Tighten securely, four or

five complete turns, making sure that one of the slots

in the end of pipe (J) aligns with small threaded hole

in the side of adapter (B). Insert and tighten one M5 x

BY HAND, insert four M10 x 1.5 x 15 mm penta-pin screws (G) into

threaded holes in the sides of ceiling arm box (E). Leave approxi-

mately 1/4" of exposed thread. Slide ceiling arm box (E) onto end of

ceiling support arm (C). Insert LONG retainer pin (H) into end of ceiling

support arm (C). Retainer pin (H) must engage slot on bottom of

ceiling arm box (E) as pictured. Attach cover plate (D) using one M5 x

.8 x 1 penta-pin screw (O). Attach using small penta-pin tool (Q) and

a 1/4" driver.

Slide adapter (B) onto end of ceiling support arm (C).

Insert support arm retainer (A) into end of ceiling

support arm (C). Insert SHORT retainer pin (I). Note: A

gentle tap with a hammer may be necessary to drive

retainer pin (I) into support arm retainer (A).

1/4”

.8 x 1 penta-pin screw (O) using small penta pin tool (Q) and a 1/4"

driver. OPTIONAL: Wrap adhesive vinyl (K) around exposed threads

of pipe (J) for a cleaner finished assembly.

ISSUED:10-19-01 SHEET #: 200-9264-3 07-26-04

4 of 4

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

Hang tilt hook box (F) onto ceiling arm box (E). Adjust

tilt as desired and tighten four M10-1.5 x 15 mm penta-

pin screws (G) securely using large penta-pin tool (P)

and a 1/4” driver.

Attach tilt hook box (F) to adapter plate (AA) using four screws (G). Tighten

using large penta-pin tool (P) and a 1/4" driver.

Note: Refer to accompanying instruction sheet for attachment of adapter plate to screen before proceeding with step 5.

PeerlessisaregisteredtrademarkandPenta-pinisatrademarkofPeerlessIndustries,Inc.

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

• For a safe assembly be sure to fully tighten four

screws(G).

WARNING

Autres manuels PEERLESS Support et étagère

PEERLESS

PEERLESS DST940 Mode d’emploi

PEERLESS

PEERLESS DS415 Mode d’emploi

PEERLESS

PEERLESS CMJ 470W Mode d’emploi

PEERLESS

PEERLESS WSP 420 Manuel utilisateur

PEERLESS

PEERLESS LDM233K Mode d’emploi

PEERLESS

PEERLESS HCACC502 Manuel utilisateur

PEERLESS

PEERLESS A100IWBMOUNT Mode d’emploi

PEERLESS

PEERLESS LMAM1940 Mode d’emploi

PEERLESS

PEERLESS COL 510P Mode d’emploi

PEERLESS

PEERLESS SmartMount ST 635 Mode d’emploi

PEERLESS

PEERLESS Mobile Videowall Trolley PDVWM 2x2 46 55 L Mode d’emploi

PEERLESS

PEERLESS DS-VL-H018 Mode d’emploi

PEERLESS

PEERLESS IWB600-WB Manuel utilisateur

PEERLESS

PEERLESS HL4UN-002 Mode d’emploi

PEERLESS

PEERLESS VPM 25-J Mode d’emploi

PEERLESS

PEERLESS PM 47 Mode d’emploi

PEERLESS

PEERLESS A100IWBMOUNT Mode d’emploi

PEERLESS

PEERLESS MSA-301 Mode d’emploi

PEERLESS

PEERLESS RTPLA 50 Mode d’emploi

PEERLESS

PEERLESS SmartMount SP850-UNL Mode d’emploi

PEERLESS

PEERLESS PLA 60-UNL Mode d’emploi

PEERLESS

PEERLESS LWB375 Mode d’emploi

PEERLESS

PEERLESS Solid-Point PLCM 1 CP Mode d’emploi

PEERLESS

PEERLESS SPK 811W Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur