Agilent Technologies E2609B Manuel utilisateur

E2609B Rackmount Kit

Installation Guide

The Rackmount kit provides a support shelf and hardware for mounting

Infiniium series oscilloscopes into Electronics Industries Association (EIA)

standard 487 mm ( 9 inch) rack cabinets.

You will need a TORX T 5 screwdriver (supplied with the kit), a TORX T 0

(supplied with the kit), and a Philips screwdriver to install the rackmount kit.

The rackmount kit includes the following parts.

Support shelf (1)

Straight bracket (4)

10-32 dress screw (4)

Tinnerman nut (8)

10-32 TORX screw (4)

L-bracket (2)

Installation Guide

To install the Glide Point mouse

1Place the support shelf upside down on a ench.

2Remove the 4 T15 TORX screws that secure the Glide Point tray to the

support shelf using the T15 TORX screwdriver.

3Remove the Glide Point mounting rackets and tray from the support

shelf.

Glide Point tray

Installation Guide

To install the Glide Point mouse

4Route the Glide Point mouse ca le through support shelf access hole.

5Install the Glide Point tray over the Glide Point mouse and ca le.

6Secure the Glide Point tray to the support shelf using the mounting

rackets and the 4 T15 TORX screws removed in step 2.

Mounting bracket (2)

Access hole

TORX screws (4)

Glide Point tray

Glide Point mouse

Installation Guide

To attach the oscilloscope to the support shelf

1Remove the accessories pouch from the top of the oscilloscope using

the T10 TORX screwdriver.

Installation Guide

To attach the oscilloscope to the support shelf

2Turn the oscilloscope upside down.

3Remove the wire ail from the front feet y pushing on one side of the

wire ail until the wire ail is free of the foot.

Wire bail

Installation Guide

To attach the oscilloscope to the support shelf

4Remove all four of the feet from the ottom of the oscilloscope.

To remove one of the front feet of the oscilloscope, push in on the squeeze tabs

while pushing the front part of the foot toward the back of the oscilloscope.

To remove one of the back feet of the oscilloscope, push in on the squeeze tabs

while pushing the front part of the foot toward the front of the oscilloscope.

Squeeze tab

Installation Guide

To attach the oscilloscope to the support shelf

5Remove the ottom 2 T15 TORX screws on the rear panel of the

oscilloscope using the T15 TORX screwdriver.

6Place the oscilloscope on the support shelf.

Installation Guide

To attach the oscilloscope to the support shelf

7Using a T15 TORX screwdriver, install the 2 TORX screws that you

removed in step 2, into the rear of the ca inet through the screw holes

in the support shelf.

Installing Infiniium Models 54810A/15A/20A/25A/35A/45A/46A

Installation Guide

To attach the oscilloscope to the support shelf

Installing the Infiniium Models 54845B/46B

Installation Guide

To attach the oscilloscope to the support shelf

Installing the Infiniium Models 54830B/31B/32B

Autres manuels Agilent Technologies Support et étagère

Agilent Technologies

Agilent Technologies E8401A Guide de dépannage

Agilent Technologies

Agilent Technologies 8648A Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E3101A Manuel utilisateur

Agilent Technologies

Agilent Technologies 969-9191 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur

Vivo

Vivo MOUNT-HP23XW Manuel utilisateur