Panasonic Transistors 2SC3935 Manuel utilisateur
Transistors
1
Publication date: February 2004 SJC00145CED
2SC3935
Silicon NPN epitaxial planar type
For high-frequency amplification/oscillation/mixing
■Features
•High transition frequency fT
•Small collector output capacitance (Common base, input open cir-
cuited) Cob and reverse transfer capacitance (Common base) Crb
•S-Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO 15 V
Collector-emitter voltage (Base open) VCEO 10 V
Emitter-base voltage (Collector open) VEBO 3V
Collector current IC50 mA
Collector power dissipation PC150 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) VCEO IC=2 mA, IB=010V
Emitter-base voltage (Collector open) VEBO IE=10 µA, IC=03V
Collector-base cutoff current (Emitter open)
ICBO VCB =10 V, IE=01µA
Collector-emitter cutoff current (Base open)
ICEO VCE =10 V, IB=010µA
Forward current transfer ratio hFE1 *1VCE =2.4 V, IC=7.2 mA 75 220
hFE2 VCE =2.4 V, IC=100 µA75
hFE ratio ∆hFE *2hFE2: VCE =2.4 V, IC=100 µA 0.75 1.60
hFE1: VCE =2.4 V, IC=7.2 mA
Collector-emitter saturation voltage VCE(sat) IC=20 mA, IB=4 mA 0.5 V
Transition frequency fTVCB =4 V, IE=−7.2 mA, f =200 MHz 1.4 1.9 2.5 GHz
Collector output capacitance Cob VCB =4 V, IE=0, f =1 MHz 0.9 1.1 pF
(Common base, input open circuited)
Reverse transfer capacitance Crb VCB =4 V, IE=0, f =1 MHz 0.25 0.35 pF
(Common base)
Collector-base parameter rbb' • CCVCB =4 V, IE=−5 mA, f =31.9 MHz 11.8 13.5 ps
■Electrical Characteristics Ta=25°C ±3°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *1: Rank classification
Rank P Q
hFE 75 to 130 110 to 220
2.1±0.1
1.3±0.1
0.3+0.1
–0.0
2.0±0.2
1.25±0.10 (0.425)
1
3
2
(0.65) (0.65)
0.2±0.1
0.9±0.10 to 0.1
0.9+0.2
–0.1
0.15+0.10
–0.05
5˚
10˚
1: Base
2: Emitter
3: Collector
EIAJ: SC-70
SMini3-G1 Package
Marking Symbol: 1S
*2: ∆hFE =hFE2 / hFE1
This product complies with the RoHS Directive (EU 2002/95/EC).
2SC3935
2SJC00145CED
VCE(sat) IChFE ICfTIE
PCTaICVCE ICVBE
Cob VCB
0 16040 12080
0
200
160
120
80
40
Collector power dissipation P
C
(mW)
Ambient temperature T
a
(°C)
012108264
0
80
60
20
40
T
a
=25°C
400 µA
300 µA
200 µA
100 µA
I
B
=500 µA
Collector current I
C
(mA)
Collector-emitter voltage V
CE
(V)
0 2.01.60.4 1.20.8
0
60
50
40
30
20
10
V
CE
=4 V
T
a
=75°C−25°C
25°C
Base-emitter voltage V
BE
(V)
Collector current I
C
(mA)
0.1 1 10 100
0.01
0.1
1
10
100 I
C
/ I
B
=10
T
a
=75°C
25°C
−25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(mA)
0.1 1 10 100
0
360
300
240
180
120
60
V
CE
=4 V
T
a
=75°C
25°C
−25°C
Forward current transfer ratio h
FE
Collector current I
C
(mA)
−0.1 −1−10 −100
0
4
3
1
2
VCB =4 V
Ta=25°C
Transition frequency fT(GHz)
Emitter current IE(mA)
1 10 100
0
1.6
1.2
0.4
0.8
I
E
=0
f =1 MHz
T
a
=25°C
Collector-base voltage V
CB
(V)
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Autres manuels Panasonic Matériel réseau
Panasonic
Panasonic WJ-NXF02 Manuel utilisateur
Panasonic
Panasonic Phototransistors PNA1803L Manuel utilisateur
Panasonic
Panasonic KX-HNS103C Manuel utilisateur
Panasonic
Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Manuel utilisateur
Panasonic
Panasonic K-NL408KT/G Manuel utilisateur
Panasonic
Panasonic WJ-PB65E01 Manuel utilisateur
Panasonic
Panasonic E series Manuel utilisateur
Panasonic
Panasonic BB-HNP17A Manuel utilisateur
Panasonic
Panasonic GA-ML Series Manuel utilisateur
Panasonic
Panasonic Chip RC Networks EZACT Guide de l'utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA3J745EG Manuel utilisateur
Panasonic
Panasonic Transistors 2SC3931 Manuel utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA2SD30 Manuel utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA3X716 (MA716) Manuel utilisateur
Panasonic
Panasonic K-NL408KT/G Manuel utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA3J7440G Manuel utilisateur
Panasonic
Panasonic Transistors 2SA2078G Manuel utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA3X727 (MA727) Manuel utilisateur
Panasonic
Panasonic Zener Diodes MAYS0750Y Manuel utilisateur
Panasonic
Panasonic Schottky Barrier Diodes MA3XD21 Manuel utilisateur
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
