Panasonic Transistors 2SC4691J Manuel utilisateur

Transistors

Publication date: January 2003 SJC00282BED

2SC4691J

Silicon NPN epitaxial planar type

For high-speed switching

■Features

•Low collector-emitter saturation voltage VCE(sat)

•SS-Mini type package, allowing downsizing of the equipment and

automatic insertion through the tape packing

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base cutoff current (Emitter open)

ICBO VCB =40 V, IE=0 0.1 µA

Emitter-base cutoff current (Collector open)

IEBO VEB =4 V, IC=0 0.1 µA

Forward current transfer ratio *hFE VCE =1 V, IC=10 mA 60 200 

Collector-emitter saturation voltage VCE(sat) IC=10 mA, IB=1 mA 0.17 0.25 V

Base-emitter saturation voltage VBE(sat) IC=10 mA, IB=1 mA 1.0 V

Transition frequency fTVCB =10 V, IE=−10 mA, f =200 MHz 450 MHz

Collector output capacitance Cob VCB =10 V, IE=0, f =1 MHz 2 6 pF

(Common base, input open circuited)

Turn-on time ton Refer to the measurement circuit 17 ns

Turn-off time toff 17 ns

Storage time tstg 10 ns

■Electrical Characteristics Ta=25°C ±3°C

Unit: mm

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO 40 V

Collector-emitter voltage (E-B short) VCES 40 V

Emitter-base voltage (Collector open) VEBO 5V

Collector current IC100 mA

Peak collector current ICP 300 mA

Collector power dissipation PC125 mW

Junction temperature Tj125 °C

Storage temperature Tstg −55 to +125 °C

Marking Symbol: 2Y

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

2. *: Rank classification

Rank Q R No-rank

hFE 60 to 120 90 to 200 60 to 200

Product of no-rank is not classified and have no indication for rank.

0.27

±0.02

0.12

+0.03

–0.01

0.80

±0.05

(0.80)

0.85

1.60

±0.05

0 to 0.02

0.10 max.

0.70

+0.05

–0.03

(0.375)

5˚

1.60

+0.05

–0.03

1.00

±0.05

(0.50)(0.50)

+0.05

–0.03

1: Base

2: Emitter

3: Collector

EIAJ: SC-89

SSMini3-F1 Package

This product complies with the RoHS Directive (EU 2002/95/EC).

2SC4691J

2SJC00282BED

VBE(sat) IChFE ICCob VCB

PCTaICVCE VCE(sat) IC

220 Ω

0.1 µF

50 Ω

= 3 V

OUT

3.3 kΩ

50 Ω

= 10 V

3.3 kΩ

VBB = −3 V

OUT

90%

10%

90%

10%

off

(Waveform at A)

OUT

10%

stg

910 Ω

0.1 µF

90 Ω

= 10 V

OUT

500 Ω

50 Ω

= 10 V

500 Ω

1 kΩ

= 2 V

, t

off

test circuit t

stg

test circuit

Measurement circuit

0 15012510025 7550

150

125

100

Ambient temperature T

(°C)

Collector power dissipation P

(mW)

0654132

250

200

150

100

= 25°C

= 8 mA

7 mA

6 mA

5 mA

4 mA

3 mA

2 mA

1 mA

Collector-emitter voltage V

(V)

Collector current I

(mA)

0.1 1 10 100 1

000

0.01

0.1

IC / IB= 10

Ta= 75°C

25°C

−25°C

Collector current I

(mA)

Collector-emitter saturation voltage V

CE(sat)

(V)

0.1 1 10 100

0.1

/ I

= 10

= 75°C

25°C

−25°C

Base-emitter saturation voltage V

BE(sat)

(V)

Collector current I

(mA)

0.1 1 10 100 1

000

160

120

100

140

= 1 V

= 75°C

25°C

−25°C

Forward current transfer ratio hFE

Collector current IC(mA)

0 5 15 20 25 3010 35

0.1

100

f = 1 MHz

= 25°C

Collector-base voltage VCB (V)

Collector output capacitance

(Common base, input open circuited) C

(pF)

This product complies with the RoHS Directive (EU 2002/95/EC).

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic Zener Diodes MALS068X Manuel utilisateur

Panasonic

Panasonic Transistors 2SC5632G Manuel utilisateur

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Manuel utilisateur

Panasonic

Panasonic WJ-NT104 Manuel utilisateur

Panasonic

Panasonic TY-FB7HM Manuel utilisateur

Panasonic

Panasonic WJ-PB85Y08 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA3X727 (MA727) Manuel utilisateur

Panasonic

Panasonic GA-ML Series Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3936G Manuel utilisateur

Panasonic

Panasonic Circuit Protector Elements UNHZ204 Manuel utilisateur

Panasonic

Panasonic Photo IC PNA4601M Manuel utilisateur

Panasonic

Panasonic RD-AA8190-01 Manuel utilisateur

Panasonic

Panasonic k-nl304g Manuel utilisateur

Panasonic

Panasonic Network Adaptor Manuel utilisateur

Panasonic

Panasonic Transistors 2SC1318 Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZSxxx Series Manuel utilisateur

Panasonic

Panasonic E series Manuel utilisateur

Panasonic

Panasonic WJ-PB85C16 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2162G Manuel utilisateur

Panasonic

Panasonic K-NL408KT/G Manuel utilisateur

Panasonic

Panasonic KX-HNS103C Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic Circuit Protector Elements UNHZ203 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur