Panasonic Transistors 2SD1819G Manuel utilisateur

Transistors

Publication date: May 2007 SJC00372AED

This product complies with the RoHS Directive (EU 2002/95/EC).

2SD1819G

Silicon NPN epitaxial planar type

For general amplification

Complementary to 2SB1218G

■Features

•High forward current transfer ratio hFE

•Low collector-emitter saturation voltage VCE(sat)

•S-Mini type package, allowing downsizing of the equipment and

automatic insertion through the tape pacing and the magazine

pacing.

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO 60 V

Collector-emitter voltage (Base open) VCEO 50 V

Emitter-base voltage (Collector open) VEBO 7V

Collector current IC100 mA

Peak collector current ICP 200 mA

Collector power dissipation PC150 mW

Junction temperature Tj150 °C

Storage temperature Tstg −55 to +150 °C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base voltage (Emitter open) VCBO IC=10 µA, IE=060V

Collector-emitter voltage (Base open) VCEO IC=2 mA, IB=050V

Emitter-base voltage (Collector open) VEBO IE=10 µA, IC=07V

Collector-base cutoff current (Emitter open)

ICBO VCB =20 V, IE=0 0.1 µA

Collector-emitter cutoff current (Base open)

ICEO VCE =10 V, IB=0 100 µA

Forward current transfer ratio hFE1 *VCE = 10 V, IC= 2 mA 160 460 

hFE2 VCE = 2 V, IC= 100 mA 90

Collector-emitter saturation voltage VCE(sat) IC=100 mA, IB=10 mA 0.1 0.3 V

Transition frequency fTVCB =10 V, IE=−2 mA, f =200 MHz 150 MHz

Collector output capacitance Cob VCB =10 V, IE=0, f =1 MHz 3.5 pF

(Common base, input open circuited)

■Electrical Characteristics Ta=25°C ±3°C

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

2. *: Rank classification

Rank Q R S No rank

hFE1 160 to 260 210 to 340 290 to 460 160 to 460

Marking symbol ZQ ZR ZS Z

Product of no-rank is not classified and have no marking symbol for rank.

■Package

•Code

SMini3-F2

•Marking Symbol: Z

•Pin Name

1: Base

2: Emitter

3: Collector

2SD1819G

2SJC00372AED

This product complies with the RoHS Directive (EU 2002/95/EC).

ICVBE ICIBVCE(sat) IC

PCTaICVCE IBVBE

hFE ICfTIE

0 16040 12080

200

160

120

Collector power dissipation P

(mW)

Ambient temperature T

(°C)

0108264

=25°C

=160 µA

40 µA

20 µA

60 µA

80 µA

140 µA

120 µA

100 µA

Collector current IC(mA)

Collector-emitter voltage VCE (V)

0 1.00.80.2 0.60.4

1 200

1 000

800

600

400

200

VCE =10 V

Ta=25°C

Base-emitter voltage VBE (V)

Base current IB(µA)

0 2.01.60.4 1.20.8

200

160

120

=10 V

=75°C−25°C

25°C

Base-emitter voltage V

(V)

Collector current I

(mA)

0 1 000800200 600400

240

200

160

120

=10 V

=25°C

Base current IB(µA)

Collector current I

(mA)

0.1 1 10 100

0.01

0.1

100 I

/ I

=10

25°C

−25°C

=75°C

Collector-emitter saturation voltage V

CE(sat)

(V)

Collector current I

(mA)

0.1 1 10 100

600

500

400

300

200

100

=10 V

=75°C

25°C

−25°C

Forward current transfer ratio h

Collector current I

(mA)

−0.1 −1−10 −100

300

240

120

180

=10 V

=25°C

Transition frequency f

(MHz)

Emitter current I

(mA)

This product complies with the RoHS Directive (EU 2002/95/EC).

SMini3-F2 Unit: mm

0.30 +0.05

−0.02

0.13 +0.05

−0.02

2.00 ±0.20

(0.89)

0.90 ±0.10

(0.65)(0.65)

1.30 ±0.10

1.25 ±0.10

2.10 ±0.10

0.425 ±0.050

(0.49)

0 to 0.10

(5°)

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic Schottky Barrier Diodes MA27E02 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA1791J Manuel utilisateur

Panasonic

Panasonic PIN Diodes MA27P07 Manuel utilisateur

Panasonic

Panasonic Phototransistors PNZ154NC Manuel utilisateur

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3937G Manuel utilisateur

Panasonic

Panasonic GA-ML Series Manuel utilisateur

Panasonic

Panasonic WJ-PB85C16 Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA3J745EG Manuel utilisateur

Panasonic

Panasonic KX-HTS Series Manuel utilisateur

Panasonic

Panasonic Chip RC Networks EZACT Guide de l'utilisateur

Panasonic

Panasonic LJ-SK56A Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD30 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA24D60 Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA2Z001 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA0720 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2161J Manuel utilisateur

Panasonic

Panasonic Transistors 2SC5846 Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3930G Manuel utilisateur

Panasonic

Panasonic RD-AA8190-01 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2122G Manuel utilisateur

Panasonic

Panasonic WJ-PB85T08 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur