Panasonic PN59021 Manuel utilisateur

PN59021/PN59023Model No.

10GBASE-LR SFP+ Module (SFP+10GLR)

10GBASE-SR SFP+ Module 10GBASE-LR SFP+ Module

PN59021 PN59023

IEEE802.3ae

10GBASE-SR

IEEE802.3ae

10GBASE-LR

SFF-8472 (Diagnostic Monitoring Interface)

850 nm 1310 nm

DC 3.3 V

0 to 50°C /20 to 80% RH (No dew condensation)

10GBASE-SR SFP+ Module (SFP+10GSR)

Installation Guide

 Thank you for purchasing our product.

 This document provides important information about safe and proper

operations of this SFP+ Module.

 Please read the "Important Safety Instructions".

 Any problems or damage resulting from disassembly of this SFP+

Module by customers are not covered by the warranty.

C1214-10719 Printed in Japan

Product Outline

Specifications

Product name

Module No.

Standards

Compatible cable

Optical wavelength

Operating voltage

Power consumption

Operating ambient

temperature/humidity

Fiber optic port

connector type

Accessories

MMF cable

LC connector (Duplex)

SMF cable

1.0 W max 1.25 W max

External dimensions

Mass (Weight) 17 g

9 mm (Height) x 14 mm (Width) x 57 mm (Depth)

(Excluding protruding sections)

Installation Guide (this document)

x 1

Protection cap of the fiber optic port (Attached to the module)

x 1

10GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-Factor

Pluggable) modules to be connected to a Panasonic Switching Hub’s SFP+ extension slot.

MMF: Multi Mode Fiber SMF: Single Mode Fiber

1. Securely connect the SFP+ Module to the

SFP+ extension slot of a Panasonic Switching

Hub.

2. Remove the protective cap of the SFP+

Module’s fiber optic port.

3. Connect a fiber optic cable that meets the

standards specified for the SFP+ Module.

4. Connect another SFP+ Module of the same

model number on the opposite end.

1. Unlatch the fiber optic cable and remove it from the

SFP+ Module.

2. Pull down the lever of the SFP+ Module 90 degrees as

shown in the figure to unlatch the SFP+ Module.

3. Pull out the SFP+ Module.

Installation

Removal

SFP+ extension slot

SFP+ Module

Fiber optic port Switching Hub

Lever

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021

This chapter contains important safety instructions for preventing bodily injury

and/or property damage. You are required to follow them.

Do not look at the laser light.

Deviation could lead to visual impairment. (Class 1 Laser Product)

Do not disassemble and/or modify this SFP+ Module.

Deviation could lead to fire, electric shock, and/or equipment failure.

 Severity of bodily injury and/or property damage, which could result from incorrect

use of the SFP+ Module, are explained below.

 The following symbols are used to classify and describe the type of instructions to be

observed.

Important Safety Instructions

This symbol indicates safety instructions.

Deviation from these instructions could lead to

bodily injury and/or property damage.

CAUTION

This symbol indicates a potential hazard

that could result in serious injury or death.

WARNING

This symbol is used to alert

users to what they must do.

This symbol is used to alert

users to what they must not do.

WARNING

CAUTION

Basic Instructions for the Use of This Product

Handle the SFP+ Module carefully so that fingers or hands may not be

injured by its end connected to the Switching Hub or the SFP+

extension slot of the Switching Hub.

For inspection and/or repair, consult the retailer.

Correctly and securely connect the SFP+ Module to the SFP+ extension slot

of a Panasonic Switching Hub.

Check the connector of the fiber optic cable for dirt and dust. If it is dirty,

be sure to clean it before connecting it to the fiber optic port.

Remove the SFP+ Module from the SFP+ extension slot before cleaning the

SFP+ Module.

Do not touch the metal terminal or place electrically-charged objects in the

proximity of the SFP+ Module. Static electricity could lead to breakdown.

Please use the SFP+ Module in locations where the ambient temperature is

within the range of 0 to 50°C.

Do not use the SFP+ Module in any condition where the specification limits

are exceeded.

Deviation could lead to malfunctions.

1. Panasonic will not be liable for any damage resulting from the operation not in

accordance with this document or the loss of communications, which may or

may not be caused by failure and/or malfunction of this product.

2. The contents described in this document may be changed without prior notice.

3. For any question, please contact the shop where you purchased the product.

 The port LED of the Switching Hub to which the SFP+ Module connected is not lit.

Is the Switching Hub powered on?

Is the SFP+ Module securely connected to the target SFP+ extension slot of the

Switching Hub?

Is the connected port of the Switching Hub enabled?

Is the cable correctly connected to the target port?

Is a conforming cable used? Is the same type of SFP+ Module used on the

opposite end?

Is the equipment connected to the target port compliant with the specified

standards?

Ensure that 100BASE-FX or 1000BASE-X equipment is not connected.

Troubleshooting

If you find any problem, please take the following steps to check.

Ce manuel convient aux modèles suivants

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic Transistors 2SC4562G Manuel utilisateur

Panasonic

Panasonic WJ-SX850 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA27D270G Manuel utilisateur

Panasonic

Panasonic WJ-PB85C16 Manuel utilisateur

Panasonic

Panasonic Fast Recovery Diodes MA2DF60 Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2122G Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZ8xxxG Series Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3930G Manuel utilisateur

Panasonic

Panasonic Switching Diodes MA36132E Manuel utilisateur

Panasonic

Panasonic GA-ML Series Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic WJ-PB85Y08 Manuel utilisateur

Panasonic

Panasonic PN261693D Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3938G Manuel utilisateur

Panasonic

Panasonic RD-AA8190-01 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA27E02 Manuel utilisateur

Panasonic

Panasonic Transistors 2SD1823 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA3X727 (MA727) Manuel utilisateur

Panasonic

Panasonic BB-HNP17A Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA3J745EG Manuel utilisateur

Panasonic

Panasonic K-NL404K/G Manuel utilisateur

Panasonic

Panasonic Phototransistors PNA1803L Manuel utilisateur

Panasonic

Panasonic PIN diodes MA27P02 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA6J786Y Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur