Panasonic Zener Diodes MALS068X Manuel utilisateur

Zener Diodes

Publication date: April 2006 SKE00022CED

MALS068X

Silicon planar type

For constant voltage and surge absorption circuits



Features

 Features



Bi-directional and high electrostatic discharge ESD

 Bi-directional and high electrostatic discharge ESD



Small terminal capacitance C

 Small terminal capacitance C



Absolute Maximum Ratings

 Absolute Maximum Ratings 

= 25

a = 25

Parameter

Symbol

Rating

Unit

Repetitive peak forward current

FRM

200

Total power dissipation

150

Junction temperature

150

Storage temperature

stg

Tstg

–55 to +150

Electrostatic discharge

ESD

Note)

1 : P

= 150 mW achieved with a printed circuit board.

2 : Test method: IEC61000-4-2

(C = 150 pF, R = 330

Ω

, Contact discharge: 10 times)



Electrical Characteristics

 Electrical Characteristics 

= 25

a = 25

Parameter

Symbol

Conditions

Min

Typ

Max

Unit

Zener voltage

= 5 mA

Z = 5 mA

6.5

7.0

7.5

Zener operating resistance

= 5 mA

Z = 5 mA

Ω

Reverse current

= 4.0 V

R = 4.0 V

Terminal capacitance

= 0 V, f = 1 MHz

R = 0 V, f = 1 MHz

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.

2. The temperature must be controlled 25

C for V

mesurement.

value measured at other temperature must be adjusted to V

(25

: V

guaranted 20 ms after current ﬂ ow.

Unit : mm

1 : Cathode

2 : Cathode

EIAJ : SC-79 SSMini2-F1 Package

0.80+0.05

–0.03

0.60+0.05

–0.03

0.12+0.05

–0.02

1.20+0.05

–0.03

0+0

–0.05

0.30±0.05

0.01±0.01

1.60±0.05

0.01±0.01

0.80±0.05(0.80)

(0.60)

(0.15)

(0.60)

5°

Marking Symbol:

Internal Connection

This product complies with the RoHS Directive (EU 2002/95/EC).

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Table des matières

Autres manuels Panasonic Matériel réseau

Panasonic

Panasonic Multi Chip Discrete UP05C8G Manuel utilisateur

Panasonic

Panasonic Transistors 2SC5846 Manuel utilisateur

Panasonic

Panasonic Transistors 2SD1819G Manuel utilisateur

Panasonic

Panasonic WJ-PB85C16 Manuel utilisateur

Panasonic

Panasonic PN59021 Manuel utilisateur

Panasonic

Panasonic Network Adaptor Manuel utilisateur

Panasonic

Panasonic Transistors 2SB1722G Manuel utilisateur

Panasonic

Panasonic k-nl304g Manuel utilisateur

Panasonic

Panasonic Zener Diodes MAZSxxx Series Manuel utilisateur

Panasonic

Panasonic Circuit Protector Elements UNHZ203 Manuel utilisateur

Panasonic

Panasonic BB-HCS301A - Network Camera Server Mode d'emploi

Panasonic

Panasonic Zener Diodes MAZQxxx Series Manuel utilisateur

Panasonic

Panasonic Fast Recovery Diodes MA2DF60 Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SD30 Manuel utilisateur

Panasonic

Panasonic RD-AA8190-01 Manuel utilisateur

Panasonic

Panasonic Transistors 2SC5632G Manuel utilisateur

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Manuel utilisateur

Panasonic

Panasonic Schottky Barrier Diodes MA2SE01 Manuel utilisateur

Panasonic

Panasonic PN54021K Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3938G Manuel utilisateur

Panasonic

Panasonic Transistors 2SA2162G Manuel utilisateur

Panasonic

Panasonic Transistors 2SC3931 Manuel utilisateur

Panasonic

Panasonic WJ-SX850 Manuel utilisateur

Panasonic

Panasonic Photo IC PNA4601M Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur