CYP PUV-1510RXWP Manuel utilisateur
PUV-1510TXWP/RXWP
HDMI over CAT5e/6/7 Wallplate Transmitter with 48V PoH
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 22/06/2018 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Transmitter Front Panel ........................... 8
6.2 Transmitter Rear Panel............................. 9
6.3 Receiver Front Panel...............................10
6.4 Receiver Rear Panel.................................11
6.5 IR Cable Pin Assignments .....................12
6.6 D-Sub 9-Pin Assignment.......................12
7. Connection Diagram .......................... 13
8. Specifications...................................... 14
8.1 Technical Specification ..........................14
8.1 CAT5e/6/7 Cable Specification ...........16
8.2 Timing Support Chart ............................16
9. Acronyms............................................. 17
6
1. INTRODUCTION
This HDMI over single Cat5e/6/7 Transmitter and Receiver set can send
uncompressed, high resolution, video/audio over a single cable up to a
distance of 100 metres. In addition to the audio and video capabilities, it
can also bi-directionally transmit RS-232 and IR control signals as well as
extending your local LAN to the display device UK 2 gang design allowing
install on AC outlet. The Receiver (PD) is powered by the 48V PoE (Power
over Ethernet) function of the Transmitter (PSE), allowing for greater
flexibility in installations.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1 x HDMI over CAT5e/6/7 Wall-plate Transmitter
1 x HDMI over CAT5e/6/7 Wall-plate Receiver
1 x IR Blaster
1 x IR Extender
1 x 48V / 0.83A DC power adaptor
1 x Power cable
1 x Operation Manual
4. SYSTEM REQUIREMENTS
HDMI input source equipment such as Blu-ray player, game console or
set-top box
HDMI output equipment such as an HDTV, projector or AV receiver.
Industry standard Cat6 or Cat6a cables are recommended
7
5. FEATURES
HDMI with 3D & 4K support. DVI signal compliant
Supports CEC bypass
Simultaneous transmission of uncompressed video, audio and data
over a single 100m/328ft Cat5e/6/7 cable
5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232)
Supports resolutions up to 4K@50/60Hz (YUV 4:2:0) and 21:9 aspect
ratio
Supports standard 48V PoE from Transmitter (PSE) to Receiver (PD)
Supports HDMI I/O cable distance up to 5m at 4K@50/60Hz (YUV 4:2:0)
Installation friendly wall/table mount case design
Note: 1. The standard 48V PoE function is designed for powering compatible
Receiver units only, non-PoE Receivers will need their own power supply.
Receivers of another brand may not be compatible.
2. Displaying HDMI 3D and 4K2K contents, equivalent source signal and
HDMI cable are required in order to secure the quality.
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front Panel
IR
OUT 1 IN 2
UPDATE
RS232 IN
POWER
LAN
LINK
HDMI IN
PUV-1510TXWP
78 6
21
5
4
3
1POWER: This LED will illuminate when the device is connected to a
power supply.
2LINK: This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other properly.
3LAN: Connect to an Ethernet device or to your local network as
appropriate an internet or network system.
4RS232 IN: Connect to a PC or laptop with D-Sub 9-pin male cable for
the transmission of RS-232 command.
5HDMI IN: Connect to the HDMI source equipment such as a game
console or Blu-ray player.
6IR IN 2: Connect to the supplied IR Extender cables for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
7IR OUT 1: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
8UPDATE: This switch is reserved for factory use only.
9
6.2 Transmitter Rear Panel
CAT5e/6/7 OUT
DC 48V
-
+
1
2
1CAT5e/6/7 OUT: Connects to the Receiver unit with a single
CAT5e/6/7 cable for transmission of all data signals includes power.
2DC 48V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
10
6.3 Receiver Front Panel
IR
POWER
LAN
RS232 OUT
LINK
HDMI OUT
UPDATE
IN 1OUT 2
PUV-1510RXWP
78 6
21
5
4
3
1POWER: This LED will illuminate when the device is receiving power
via PoE (Power over Ethernet).
2LINK: This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other properly.
3LAN: Connect to an Ethernet device or to your local network as
appropriate.
4RS232 OUT: Connect (via D-Sub 9-pin female cable) to the device that
is to be controlled by RS-232 commands.
5HDMI OUT: Connect to an HDMI equipped display such as an HDTV or
projector for display of the HDMI input source signal.
6IR IN 1: Connect to the supplied IR Extender cable for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
7IR OUT 2: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
8UPDATE: This switch is reserved for factory use only.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CYP Émetteur
CYP
CYP CH-1527TXPLV Manuel utilisateur
CYP
CYP CH-527TXVBD Manuel utilisateur
CYP
CYP CH-506RXWP Manuel utilisateur
CYP
CYP CH-A320TX Manuel utilisateur
CYP
CYP PUV-1730PLTX-AVLC Manuel utilisateur
CYP
CYP CH-U331TX Manuel utilisateur
CYP
CYP CPLUS-12FTX Manuel utilisateur
CYP
CYP CH-1602TXR Manuel utilisateur
CYP
CYP VEX-T1201T Manuel utilisateur
CYP
CYP PU-607BD-TX Manuel utilisateur
CYP
CYP CH-2538TXM-TB Manuel utilisateur
CYP
CYP CH-1529TXPLV Manuel utilisateur
CYP
CYP COH-RX2 Manuel d'installation
CYP
CYP CH-1106TX & RX Manuel utilisateur
CYP
CYP PUV-1620S-TX Manuel utilisateur
CYP
CYP PUV-1710LTX-AVLC Manuel utilisateur
CYP
CYP CH-2602TXWPUS Manuel utilisateur
CYP
CYP PU-501 Manuel utilisateur
CYP
CYP CSI-8H8CV2IR Manuel utilisateur
CYP
CYP IP-A750TX Manuel utilisateur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
