CYP EL-2600V Manuel utilisateur

EL-2600V

HDBaseT Transmitter with Trigger Control

4K UHD+HDMI/DP/VGA/USB

Driver User Guide

registered trademarks of HDMI licensing Administrator, Inc.

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 21/09/2020 First release

CONTENTS

1. Introduction...........................................6

2. DRIVER PROPERTIES..............................6

3. IP NETWORK CONNECTION...................6

4. DEVICE SPECIFIC COMMAND ................7

4.1 Set Power Reboot...................................... 7

4.2 Set Auto Switching Mode....................... 7

4.3 Set Key Lock................................................. 7

4.4 Set Route Preset......................................... 7

4.5 Set HDBT Audio Mode............................. 7

4.6 Set Audio Mixer Source Volume........... 8

4.7 Set Microphone Mode............................. 8

4.8 Set Microphone Volume ......................... 8

4.9 Set Audio Mixer Line Volume ................ 8

4.10 Set Analog Output Volume ................. 8

4.11 Set Analog Output Mute ..................... 8

4.12 Set Phantom Mode ................................ 8

1. INTRODUCTION

This driver has been designed to provide two-way control of the CYP 9x2

Multi-format Presentation Scaler, via RS232 or TCP/IP.

2. DRIVER PROPERTIES

The property of this driver is shown below.

Figure 1: Driver Properties

Driver Version Driver version number

Debug Mode Support use only

Debug Level Support use only

Command Delay Milliseconds a delay of millisecond between

commands

Connected To Network Shows operational status of driver

3. IP NETWORK CONNECTION

If an IP driver used, the IP address of the A/V Scaler is entered in the usual

way in connections -> Network.

4. DEVICE SPECIFIC COMMAND

In addition to the usual A/V Scaler functionality supported by Control4,

there are a number of device specific commands for the A/V Scaler

switching.

4.1 Set Power Reboot

Power Status Reboot

4.2 Set Auto Switching Mode

Video Output Channel HDMI or HDBT

Switching Mode OFF or Auto Switch

4.3 Set Key Lock

Key Lock Status Locked or Unlocked

4.4 Set Route Preset

Route Preset 1 to 4

4.5 Set HDBT Audio Mode

HDBT Audio Mode

1 [Source audio only]

2 [Line audio only]

3 [Microphone only]

4 [Source + Microphone]

5 [Source + Line]

4.6 Set Audio Mixer Source Volume

Volume(dB) -120 to 18

4.7 Set Microphone Mode

Microphone Mode Front Panel or WebGUI

4.8 Set Microphone Volume

Volume(dB) 0 to 60

4.9 Set Audio Mixer Line Volume

Volume(dB) -120 to 18

4.10 Set Analog Output Volume

Volume(dB) -103 to 24

4.11 Set Analog Output Mute

Audio Mute Status Mute or Unmute

4.12 Set Phantom Mode

Phantom Mode OFF / 5V / 48V

Table des matières

Autres manuels CYP Émetteur

CYP

CYP PU-1H7HBTL Manuel utilisateur

CYP

CYP CHDBT-1H2CE Manuel utilisateur

CYP

CYP PU-507TX-1H Manuel utilisateur

CYP

CYP CH-527TXPLVBD Manuel utilisateur

CYP

CYP PUV-1630TXWP Manuel utilisateur

CYP

CYP IP-A750TX Manuel utilisateur

CYP

CYP PUV-1660TTX Manuel utilisateur

CYP

CYP CH-507TXWPUS Manuel utilisateur

CYP

CYP CH-1107 TX Manuel utilisateur

CYP

CYP CH-A320TX Manuel utilisateur

CYP

CYP CDPS-P313RTX Manuel utilisateur

CYP

CYP PUV-1630TXWP-EU Manuel utilisateur

CYP

CYP CH-2527TX Manuel utilisateur

CYP

CYP PUV-1620S-TX Manuel utilisateur

CYP

CYP PU-515PLTX-1H Manuel utilisateur

CYP

CYP CH-506RXWP Manuel utilisateur

CYP

CYP PU-USB2-KIT Manuel utilisateur

CYP

CYP PUV-3000TX Manuel utilisateur

CYP

CYP PUV-1830TX-AVLC Manuel utilisateur

CYP

CYP CH-516TXAS Manuel utilisateur

CYP

CYP CH-1605TXV Manuel utilisateur

CYP

CYP CH-1602RX Manuel utilisateur

CYP

CYP PU-103 Manuel utilisateur

CYP

CYP PUV-1630TTX Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur