CYP CSC-5300 Manuel utilisateur
1
CSC-5300
PC/Video/HD to HDMI 1.3
Switcher
Operation Manual
Operation Manual
CSC-5300
TABLE OF CONTENTS
1. Introduction .........................................................................................
2. Features ...............................................................................................
3. Operation Controls and Functions ....................................................
3.1 Front Panel ....................................................................................
3.2 Rear Panel .....................................................................................
4. Remote Control ...................................................................................
5. RS-232 Remote Control Protocol........................................................
5.1 RS-232 transmission format...........................................................
6. Connection and Installation...............................................................
7. Specications ......................................................................................
Input Signal Specications..................................................................
Output Signal Specications..............................................................
1
1
2
2
2
3
3
4
5
5
6
6
1
1. Introduction
Looking for a way to watch all of your Analog/Digital devices on an HDMI
display without having to constantly switch devices? Well this powerful PC/
Video/HD to HDMI 1.3 Switcher gives you the ability to convert your Analog
and digital signals to HDMI v1.3 output. The product is compatible to HDMI
v1.3 specications, which is a cutting edge technology that denes the
transfer of Deep Color (10-bit and 12-bit) video. Using the front panel or the
remote control select the desired input source and sit back and relax as your
media is effortlessly displayed, then switch to another source just easily. This
HDMI switcher is the smart way to handle your multiple A/V sources.
2. Features
•HDMI 1.3, HDCP1.1 and DVI1.0 compliant.
•Deep Color video up to 12bit, 1080p (24/60)Hz.
•Supports analog/digital video/audio input and HDMI v1.3 output.
•Supports a wide range of PC and HDTV resolutions from VGA to
•SXGA@60Hz and 480i to 1080p.
•Supports 3D comb lter and 3D noise reduction (DNR).
•Simply press a button on the front panel or remote control to convert from
480i/576i to 480p/576p.
•Has an audio delay for 150ms, this feature will not function when under
HDMI input.
•Support IR remote control and RS-232 control.
2
3.2 Rear Panel:
POWER
DC 5V
VIDEO 1 YPb/CbPr/Cr
HDMI IN
/BYPASS HDMI OUT
AUDIO 1 AUDIO 1
Pr/Cr Pb/Cb Y
R LLR
AUDIO 2
SVIDEO 1
SVIDEO 2
COMPONENT 1 IN
RS-232COMPONENT 2 IN AUDIO
-
IN
-
PC
VIDEO 2
AUDIO 2
3 2 1
1 3 4 5 762
3. Operation Controls and Functions
3.1 Front Panel:
POWER HDMI 1 HDMI 2 HDMI 3 PC COMP 1 COMP 2 SVIDEO-1 SVIDEO-2 VIDEO-1 VIDEO-2 AUDIO
DELAY
CSC-5300
HDMI 1.3 VIDEO SWITCHER 3D Video Comb Filter/12bit
480I480P
576I576P
12 43
qPower: Plug the 5V DC power supply into this unit and connect the
adaptor to an AC outlet.
②CV/SV inputs: Connect each of the input ports to the CV/SV and R/L
output ports of your source equipments such as DVD player or set-
top-box. The CV1/SV1/Audio1 and CV2/SV2/Audio2 are individual loops
for source equipments.
eComponent inputs: Connect each of the input ports to the component
and R/L output ports of your source equipments such as DVD/Blu-Ray
player or set-top-box. The mponent1/Component Audio1 and
Component2/Component Audio2 are individual loops for source
equipments.
rHDMI inputs: Connect each of the input ports to the HDMI/DVI output
ports of your source equipment such as DVD/Blu-Ray player or set-top-
box.
tPC input: Connect the PC/audio input port to the PC/audio output port
of your source equipment such as Laptop or PC.
yRS232: 9-pin D-Sub connector for connecting to your PC or other control
console for remote control of the switcher.
uHDMI output: Connect the output port to the HDMI display.
qPower button and power LED indicator: Press the button to turn the unit
on and the power LED will switch on.
②IR sensor.
eInput source selection: Press the input button to switch to your desired
input source, the LED will turn on to indicate which input source is
selected.
rAudio delay: Press to delay audio sources for 150ms, the LED will switch on
when power is on.
3
4. Remote Control
CR-62
POWERAudio Delay
COMP
SVIDEO
VIDEO
HDMI
PC
480I480P
576I576P
21
21
21
21 1
3
1. Audio Delay: Press to delay audio output for 150ms.
2. Format selection: To switch between Interlace and
Progressive format.
3. Power: Press the button to turn on/off the unit.
4. Component 1/2: Press to select Composite 1 or 2
inputs.
5. PC: Press for PC input.
6. S-Video1/2: Press to select S-Video 1 or 2 inputs.
7. Video1/2: Press to select Video 1 or 2 inputs.
8. HDMI 1/2/3: Press to select HDMI 1, 2 or 3 inputs.
3
5
21
4
6
7
8
5. RS-232 Remote Control Protocol
* The connection between this unit and the remote control with RS-232
modem cable.
System Remote Controller
Pin Denition Pin Denition
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Pins denition of modem cable
* RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 bits
Parity : None
Stop Bit : 1 bit
4
5.1 RS-232 transmission format:
Command Code Response Description
R POWER > POWER ON~OFF SHOW POWER STATUS
R SOURCE > SOURCE HDMI~CV SHOW SOURCE STATUS
R AUDIODELAY > AUDIODELAY OFF~ON SHOW AUDIO DELAY STATUS
R SD_ITOP >480i/576i TO 480p/576p
OFF~ON
SHOW 480i/576i TO 480p/576p
STATUS
R FW_VER > FIRMWARE VERSION : Vx.xx SHOW FIRMWARE VERSION
(a)Set Commend
Command Code Response Description
S POWER 0 > POWER OFF POWER OFF
S POWER 1 > POWER ON POWER ON
S SOURCE 0 > SOURCE HDMI1 HDMI1 INPUT
S SOURCE 1 > SOURCE HDMI2 HDMI2 INPUT
S SOURCE 2 > SOURCE HDMI3 HDMI3 INPUT
S SOURCE 3 > SOURCE PC PC INPUT
S SOURCE 4 > SOURCE COMP1 COMPONENT1 INPUT
S SOURCE 5 > SOURCE COMP2 COMPONENT2 INPUT
S SOURCE 6 > SOURCE SV1 SV1 INPUT
S SOURCE 7 > SOURCE SV2 SV2 INPUT
S SOURCE 8 > SOURCE CV1 CV1 INPUT
S SOURCE 9 > SOURCE CV2 CV2 INPUT
S AUDIODELAY 0 > AUDIODELAY OFF OFF : NO DELAY
S AUDIODELAY 1 > AUDIODELAY ON ON : DELAY 150ms
S SD_ITOP 0 > 480i/576i TO
480p/576p OFF OFF : NO 480i/576i TO 480p/576p
S SD_ITOP 1 >480i/576i TO
480p/576p ON ON : 480i/576i TO 480p/576p
S RESET 1 > RESET ON RESET ACTION
5
6. Connection and Installation
7. Specications
Frequency Bandwidth 2.25Gbps (single link)
Input Ports 3 x HDMI female ports (Type A connector)
1 x PC with audio jack
2 x Y/Pb/Pr with R/L
2 x CV/SV with R/L
1 x RS-232
Output Port 1 x HDMI female port (signal link)
Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL certied)
Dimensions (mm) 280(W) x 147(D) x 44(H)
Weight(g) 1380
Chassis Material Metal
Silkscreen Color Gray
Operating Temperature 0°C ~ 40°C
↓↓↓
↑
PC
DVD
or
BLU-RAY
or
BLU-RAYDVD
LCD TV
6
Input Signal Specications
Output Signal Specications
Note: Output resolution limit depends on the TV/Monitor/Displays specications.
PC Resolution Vert Rate
VGA
SVGA
XGA
SXGA
UXGA
WUXGA
640x480
800x600
1024x768
1280x1024
1600x1200
1920x1200
60/72/75/85Hz
56/60/72/75/85Hz
60/70/75/85Hz
60/75Hz
60 Hz
60 Hz
HDTV Resolutions Vert Rate
480p
480i
576p
576i
720p
1080i
1080p
720x480
720x480
720x576
720x576
1280x720
1920x1080i
1920x1080p
60Hz
60Hz
50Hz
50Hz
50, 60Hz
50, 60Hz
50, 60Hz
PC Resolution Vert Rate
VGA
SVGA
XGA
SXGA
UXGA
WUXGA
640x480
800x600
1024x768
1280x1024
1600x1200
1920x1200
60/72/75/85Hz
56/60/72/75/85Hz
60/70/75/85Hz
60Hz
60Hz
60Hz
HDTV Resolutions Vert Rate
480p
480i
576p
576i
720p
1080i
1080p
720x480
720x480
720x576
720x576
1280x720
1920x1080i
1920x1080p
60Hz
60Hz
50Hz
50Hz
50, 60Hz
50, 60Hz
50, 60Hz
7
Input Signal Specications
Output Signal Specications
Note: Output resolution limit depends on the TV/Monitor/Displays specications.
Table des matières
Autres manuels CYP Changer
CYP
CYP AU-D21 Manuel utilisateur
CYP
CYP CDPS-U42HPIP Manuel d'installation
CYP
CYP EL-5500 Manuel utilisateur
CYP
CYP CDPS-U2HPIP Manuel utilisateur
CYP
CYP PU-8H8HBT Manuel utilisateur
CYP
CYP EL-41S-4K22 Manuel utilisateur
CYP
CYP CPRO-3D42S Manuel utilisateur
CYP
CYP CPLUS-31PS Manuel utilisateur
CYP
CYP CSDI-44 Manuel utilisateur
CYP
CYP CLUX-4S2 Manuel utilisateur
CYP
CYP EL-42S Manuel utilisateur
CYP
CYP EL-41X Manuel utilisateur
CYP
CYP CMSI-8D8DSA Manuel utilisateur
CYP
CYP OR-HD62CD Manuel utilisateur
CYP
CYP EL-5400D Manuel utilisateur
CYP
CYP CH-2537TXM-TB Manuel utilisateur
CYP
CYP CSDI-42 Manuel utilisateur
CYP
CYP EL-5300 Manuel utilisateur
CYP
CYP PU-8H8HBT Manuel utilisateur
CYP
CYP MA-U42 Manuel utilisateur
