Ruijie RG-S6510-4C Series Manuel d'installation et d'exploitation

Ruijie RG-S6510-4C Series Switches

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our switches. This guide will help you install and use the switches.

Scope

This manual describes the functions and physical features of the switches, and presents the installation procedure,

troubleshooting procedure, technical specifications, and specifications and usages rules of cables and connectors. It is

intended for the users that have some experience in installing and maintaining network hardware and want to learn the

above information. At the same time, it is assumed that the users of this switch are already familiar with the related

terms and concepts of Ethernet.

Document Structure

Chapter 1 "Product Overview" describes the main characteristics, technical specifications, and related modules

of this product.

Chapter 2 "Preparation before Installation" lists the safety, power supply, and site requirements that must be

met before the switch can be installed.

Chapter 3 "Product Installation" describes how to install the integrated switch and modules, and connect its

power cables and grounding lines.

Chapter 4 "System Debugging" describes the commissioning after the switch is powered on for the first time.

Chapter 5 “Monitoring and Maintenance”

Chapter 5 "Troubleshooting" describes possible problems met during the installation and use of the switch and

solutions for such problems.

Appendix A "Connector and Connection Media"

Appendix B "Mini-GBIC, 10G, 40G Modules and FC Modules"

Appendix C “Lightening Protection”

Appendix D “Cabling Recommendations in Installation”

Appendix E “Site Selection”

Appendix F “Mini USB Console Driver Installation”

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss

of data.

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 3 -

1 Product Overview

RG-S6510-4C series switch is a data center-oriented high-density 10G layer 3 IPv6 box-type switch. They are mainly

applicable to data center scenario to provide convergence and access service for the servers with 10G ports.

The RG-S6510-4C series switch includes a switch and three extension modules.

Model

100G/40G

QSFP28

Ethernet Port

25G/10G

SFP28

Ethernet Port

10GBase-T

Ethernet Port

Extension

Module Slot

Redundant

Fan

Redundant

Power Supply

RG-S6510-4C

2+1

1+1

M6500-24VS2CQ

M6500-08CQ

M6500-16QXS

An SFP28 port supports 25G/10Gbase-R and does not support 1000base-X.

A QSFP28 port supports both 100G/40G mode and 4x25G/4x10G mode.

1.1 RG-S6510-4C

Specifications

Model

RG-S6510-4C

CPU

Quad-core processer, 1.0GHz

BOOT ROM

8MB

EMMC

8GB

SDRAM

DDR3 4GB

Extension Module

Slot

Extension Module

M6500-24VS2CQ, M6500-08CQ, M6500-16QXS

Fan Slot

3 (support 2+1 redundancy, configure at least 2 fan modules in one switch)

Fan Module

M6500-FAN-F

Power Supply

Slot

2 (support 1+1 redundancy)

Power Module

RG-PA800I-F

Power Supply

Input

AC input

Rated voltage range: 100V AC to 240V AC

Maximum voltage range: 90V AC to 264V AC

Frequency: 50 Hz to 60 Hz

Rated current: 10 A to 5 A

High voltage direct current (HVDC) input:

Input voltage range: 192V DC to 288V DC

Rated input current: 240V DC

Input current range: <4.5 A

Power

Consumption

Less than 650 W

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 4 -

Fiber Module

Refer to Appendix B

The supported modules may change. Please contact Ruijie Networks for details.

SFP28 Port

Supported. The number of ports depends on the extension module.

QSFP28 Port

Supported. The number of ports depends on the extension module.

10GBASE-T Port

Unsupported

Temperature

Warning

Support temperature warning and over-temperature protection.

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°C to 40°C (32°F to 104°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Working Humidity

10% to 90% RH (non-condensing)

Weight（with 3 fan

modules and 2

power modules）

19 kg (41.89 lbs)

Dimensions

(L x W x H)

442 mm x 520 mm x 86 mm (17.40 in. x 20.47 in. x 3.39 in.), 2RU

RG-S6510-4C switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

Product Appearance

The hardware of the S6510-4C includes the chassis, the power supply system and the heat dissipation system.

The power supply system: Provides 2 power supply slots, which support 1+1 power supply redundancy. It is

recommended users configure power supply redundancy.

The heat dissipation system: Provides 3 fan module slots, which support 2+1 fan redundancy. It is recommended

users configure all fans redundancy.

Figure 1-1 Appearance of the RG-S6510-4C

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 5 -

Front Panel

Figure 1-2 Front Panel of the S6510-4C

Notes:

1. Sub Slot 1

2. Sub Slot 2

3. Sub Slot 3

4. Sub Slot 4

Back Panel

Figure 1-3 Back Panel of the S6510-4C

Notes:

1. Fan Module Slot

2. Fan Indicator

3. USB Port

4. MGMT Port

5. Console Port

6. Mini-USB Serial Port

7. MGMT Status Indicator

8. ID Indicator

9. Status Indicator

10. Reserved Function Button

11. Asset Management Label

12. Grounding Point

13. Power Slot

Asset Management Label

The asset management label is next to the switch status indicator of the switch back panel. The label is movable and

can be withdrawn from the device. Users can mark the information such as asset name, category, code and registration

date on the label which helps to improve asset management accuracy and efficiency.

Figure 1-4 Asset Management Label of the RG-S6510-4C

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 6 -

External Ports

The RG-S6510-4C provides the following ports:

Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings

and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on

line and save the log information.

To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the

local USB port is compatible with most of the USB controllers except some USB flash disks.

Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with

the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host

software uploading.

Mini-USB serial port: Use mini-USB cable to connect the USB port. This interface is connected with the serial port

of terminal PC to perform system debugging, configuration, maintenance, management, and host software

uploading.

10/100/1000M MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface

is connected with Ethernet port of a PC to perform program downloading.

Indicator

Panel

Identification

Status

Meaning

System indicator

Status

Off

The system is not powered up.

Solid red

1) One of the modules fails.

2) The internal temperature exceeds the threshold,

and the switching service resets.

Blinking green

The system is initializing.

Solid green

The system is operational.

Solid yellow

The temperature exceeds the threshold.

ID indicator

Off

Device location is disabled.

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 7 -

Solid blue

Device location is enabled.

MGMT port indicator

MGMT

Off

The port is not connected.

Green

The port is connected at 1000Mbps.

Yellow

The port is connected at 10/100Mbps.

Blinking

The port is transmitting or receiving data.

Power Supply

The RG-S6510-4C series switch supports power supply the PA800I-F. The smart power supply module supports power

management, and the host can read input power, input current, and temperature in real time. The power supply module

supports hot swapping.

The RG-S6510-4C series switch supports 1+1 power supply redundancy. To improve the stability and reliability of

the entire system, it is recommended to configure 1+1 power supply redundancy. When the two power supply

modules work normally, the switch is in the status of current sharing.

It requires at least one power supply module to work normally. Install a blank panel to the empty slot to prevent

dust from entering the switch.

Heat Dissipation

The working temperature of the RG-S6510-4C switch is 0°C to 40°C (32°F to 104°F), and the heat dissipation design

needs to ensure the stability, safety and maintainability in such environment. The RG-S6510-4C series switch adopts

fan ventilation and forced convection to ensure the device can work normally in specified environment. Dust the device

every three months to avoid blocking the ventilation openings.

The RG-S6510-4C supports M6500-FAN-F and provides fan speed regulation, fan failure warning, and fan hot

swapping.

Figure 1-5 Ventilation and Heat Dissipation of the RG-S6510-4C

Maintain a minimum of 20 cm clearance around the device for ventilation.

It requires at least two fan modules to work normally. Install a blank panel to the empty slot to prevent dust from

entering the switch.

RG-SS6510-4C Series Switch Hardware Installation and Reference Guide Product Overview

- 8 -

1.2 Modules

RG-S6510-4C switch supports the following modules: M6500-24VS2CQ, M6500-08CQ, M6500-16QXS, RG-PA800I-F,

and M6500-FAN-F.

1.2.1 M6500-24VS2CQ

Module Appearance

Figure 1-6 M6500-24VS2CQ

Notes:

1. Status Indicator

2. 25G/10G SFP28 Port

3. 1F-24F Port Status Indicator

4. 25F-26F Port Status Indicator

5. 100G/40G QSFP28 Port

External Ports

The M6500-24VS2CQ provides 24 SFP28 ports and 2 QSFP28 ports and supports hot swapping of SFP28/SFP+ and

QSFP28/QSFP+ modules. Both fiber modules and DAC can be used.

Indicator

Panel

Identification

Status

Meaning

System indicator

Status

Off

The system is not powered up.

Solid red

The module fails or resets.

Blinking green

The system is initializing.

Solid green

The system is operational.

Solid yellow

The temperature exceeds the threshold.

SFP28 port indicator

1F-24F

Off

The port is down.

Solid green

The port is up.

Blinking

The port is receiving or transmitting data.

QSFP28 port

indicator

25F-26F

(4*25G/4*10G)

Off

The port is down.

Solid green

The port is connected at 25G/10G.

Blinking green

The port is receiving or transmitting data at 25G/10G.

25F-26F

(1*100G/1*40G)

Off

The port is down.

Solid green

The port is connected at 100G/40G.

Autres manuels pour RG-S6510-4C Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ruijie Changer

Ruijie

Ruijie RG-NBS3200 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2910-24GT4SFP-UP-H Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS86 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6150-X Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6220-H Series Manuel utilisateur

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6920-4C Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6930-2C Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S5750-H Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS83 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-ES206GS-P Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S5000-24GT4MS-E Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-ES Series Manuel utilisateur

Ruijie

Ruijie Reyee RG-NBS Series Manuel utilisateur

Ruijie

Ruijie RG-ES1 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6000C-48GT4XS-E-AC DCN Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS85 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES109DS Manuel utilisateur

Ruijie

Ruijie RG-S7800C Series Manuel d'installation et d'exploitation

Ruijie

Ruijie S8600E Series Manuel

Ruijie

Ruijie RG-CS83 Series Manuel utilisateur

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES126S-P Manuel d'installation et d'exploitation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur