Ruijie RG-S2600G-I Series Mode d’emploi

CLI Reference Guide

RG-S2600G-I Series Switches

RGOS 10.4(3b16)

RGOS®S2600G-I Series CLI Reference Guide

Revision No.: Version 10.4(3b16)

Date:

Without our written permission, this document may not be excerpted, reproduced, transmitted,

or otherwise in all or in part by any party in any means.

Exemption statement

This document is provided “as is”. The contents of this document are subject to change without

any notice. Please obtain the latest information through the Ruijie Networks website. Ruijie

Networks endeavors to ensure content accuracy and will not shoulder any responsibility for

losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Version Description

This manual matches the software version RGOS®10.4(3b16).

Target Readers

This manual is intended for the following readers:

Network engineers

Technical salespersons

Network administrators

Conventions in this Document

1. Universal Format Convention

Arial: Arial with the point size 10 is used for the body.

Note: Aline is added respectively above and below the prompts such as caution

and note to separate them from the body.

Format of information displayed on the terminal: Courier New, point size 8,

indicating the screen output. User's entries among the information shall be

indicated with bolded characters.

2. Command Line Format Convention

Arial is used as the font for the command line. The meanings of specific formats

are described below:

Bold: Key words in the command line, which shall be entered exactly as they

are displayed, shall be indicated with bolded characters.

Italic: Parameters in the command line, which must be replaced with actual

values, shall be indicated with italic characters.

[ ]: The part enclosed with [ ] means optional in the command.

{ x | y | ... }: It means one shall be selected among two or more options.

[ x | y | ... ]: It means one or none shall be selected among two or more options.

//:Lines starting with an exclamation mark "//" are annotated.

3. Signs

Various striking identifiers are adopted in this manual to indicate the matters

that special attention should be paid in the operation, as detailed below:

Caution

Warning, danger or alert in the operation.

Note

Descript, prompt, tip or any other necessary supplement or

explanation for the operation.

Note

The port types mentioned in the examples of this manual may not

be consistent with the actual ones. In real network environments,

you need configure port types according to the support on various

products.

The display information of some examples in this manual may

include the information on other series products, like model and

description. The details are subject to the used equipments.

System Configuration

1. CLI Authorization Configuration Commands

2. Basic Configuration Management

3. HTTP Service Configuration Commands

4. UPGRADE Configuration Commands

5. LINE Configuration Commands

6. File System Configuration Commands

7. Configuration Commands of Configuration File Management

8. CPU-LOG Configuration Commands

9. Memory Configuration Commands

10.Syslog Configuration Commands

11.Cluster Management Configuration Commands

12.Redundancy Configuration Commands

13.SRM Configuration Commands

14.Hardware Entry Capacity Commands

CLI Reference Guide CLI Authorization Configuration Commands

CLIAuthorization Configuration

Commands

alias

You can use the alias command to configure an alias of a command in the global configuration mode. Use the no

form of the command to remove the alias of a specified command or all the aliases under one mode.

alias mode command-alias original-command

no alias mode command-alias

Parameter

description

Parameter

Description

mode

Mode of the command represented by the alias

command-alias

Alias of the command

original-command

Syntax of the command represented by the alias

Default

Settings

Some commands in the privileged EXEC mode have default alias

names.

Command

mode

Global configuration mode.

Usage

guidelines

The following table lists the default alias of the commands

in the privileged EXEC mode.

Alias

Actual Command

help

ping

show

undebug

The default alias cannot be deleted by the no alias exec

command.

By setting the alias, you can use a word to replace a

command. For example, you can create an alias to

represent the first part of a command, and then type the

rest part of the command.

The mode of the command represented by the alias is the

command mode existing in the current system. In the

CLI Reference Guide CLI Authorization Configuration Commands

global configuration mode, you can use alias ? to list all

the modes under which you can configure alias for

commands.

Ruijie(config)# alias ?

aaa-gs AAA server group mode

acl acl configure mode

bgp Configure bgp Protocol

config globle configure mode

......

The alias also has its help information that is displayed

after * in the following format:

*command-alias=original-command

For example, in the privileged EXEC mode, the default

alias sstands for show. You can enter s? to query the key

words beginning with sand the help information of the

alias.

Ruijie#s?

*s=show show start-chat start-terminal-service

If an alias represents more than one word, the command

will be displayed in brackets. For example, if you set sv

stand for show version in the privileged EXEC mode,

then:

Ruijie#s?

*s=show *sv="show version" show start-chat

start-terminal-service

The alias must begin with the first letter of the command.

The first letter of the command cannot be a space. The

space before the command cannot be used as a valid

alias.

Ruijie# s?

show start-chat start-terminal-service

The command alias also has its help information. For

example, if the alias ia represents ip address in the

interface configuration mode, then:

Ruijie(config-if)#ia ?

A.B.C.D IP address

dhcp IP Address via DHCP

Ruijie(config-if)# ip address

The above help information lists the parameters of ip

address and shows the actual command name.

You must enter an entire alias; otherwise it cannot be

recognized.

Use the show aliases command to show the aliases

setting in the system.

CLI Reference Guide CLI Authorization Configuration Commands

Examples

In the global configuration mode, use def-route to represent the

default route setting of ip route 0.0.0.0 0.0.0.0 192.168.1.1:

Ruijie# configure terminal

Ruijie(config)# alias config def-route ip route 0.0.0.0 0.0.0.0

192.168.1.1

Ruijie(config)#def-route?

*def-route="ip route 0.0.0.0 0.0.0.0 192.168.1.1"

Ruijie(config)# end

Ruijie# show aliases config

globle configure mode alias:

def-route ip route 0.0.0.0 0.0.0.0

192.168.1.1

commands

Command

Description

show aliases

Show the aliases settings.

privilege

To attribute the execution rights of a command to a command level, use privilege in the global configuration

mode. The no form of this command recovers the execution rights of a command to the default setting.

privilege mode [all] [level level | reset ]command-string

no privilege mode [all] [level level ]command-string

Parameter

description

Parameter

Description

mode

CLI mode of the command to which the

execution rights are attributed.

all

Alias of the command

level

Specify the execution right levels (0–15) of a

command or sub-commands

reset

Restore the command execution rights to its

default level

command-string:

Command string to be authorized

Default

Settings

N/A.

Command

mode

Global configuration mode.

CLI Reference Guide CLI Authorization Configuration Commands

Usage

guidelines

The following table lists some key words that can be

authorized by command privilege in the CLI mode. The

number of command modes that can be authorized may

vary with different devices. In the global configuration

mode, you can use privilege ? to list all CLI command

modes that can be authorized.

Mode

Descripton

config

Global configuration mode.

exec

Privileged EXEC mode

interface

Interface configuration mode

ip-dhcp-pool

DHCP address pool configuration

mode

keychain

KeyChain configuration mode

keychain-key

KeyChain-key configuration

mode

time-range

Time-Range configuration mode

Examples

Set the password of CLI level 1 as test and attribute the reload rights

to reset the device:

Ruijie(config)#enable secret level 10test

Ruijie(config)#privilege exec level 1reload

After the above setting, you can access the CLI window as level-1

user to use the reload command:

Ruijie>reload ?

LINE Reason for reload

<cr>

You can use the key word all to attribute all sub-commands of reload

to level-1 users:

Ruijie(config)# privilege exec all level 1 reload

After the above setting, you can access the CLI window as level-1

user to use all sub commands of the reload command:

Ruijie>reload ?

LINE Reason for reload

at reload at a specific time/date

cancel cancel pending reload scheme

Table des matières

Autres manuels Ruijie Changer

Ruijie

Ruijie RG-S6100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NBS3200 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S29 Series Manuel d'installation

Ruijie

Ruijie RG-S6580-24DC8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-ES126S-P V2 Manuel utilisateur

Ruijie

Ruijie RG-S8600 Series Manuel utilisateur

Ruijie

Ruijie RG-ES100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES126S-LP Manuel utilisateur

Ruijie

Ruijie RG-S6000C-48GT4XS-E-AC DCN Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6150-X Series Comment utiliser

Ruijie

Ruijie Reyee RG-NBS7006 Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-NBS7003 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-PF2920-DPBOX-P Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NIS3100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-N18000-XH Series Manuel d'installation et d'exploitation

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS83 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS86-20XS Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S3760E Series Manuel utilisateur

Ruijie

Ruijie RG-ES126S-P Manuel d'installation et d'exploitation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur