Quantum DLTtape DLT 4000 Manuel utilisateur

Quantum Corporation DLTtapeApplication Note

_____________________________________________________________________________________________

DLTtapeInstallation HP® 9000 Series 800 System HP-UX® 9.04

This application note is to be used only as a guideline for the titled subject. The user assumes all

responsibility for understanding the interrelationships of this information with other affected software or

system products. Quantum Corporation provides this information as a service only, and assumes no

responsibility for any damages, which could result from the use of this information.

The information in this application note is subject to change without notice and is not to be construed as a

commitment by Quantum Corporation. Quantum Corporation assumes no responsibility for any errors that

may appear in this document.

NOTE: The information in this document pertains to the DLT™4000 or DLT™7000 cartridge tape drive or

the DLT™4500 or DLT™4700 tape mini-library that you are installing. The information may be applied as

well to installing DLT™2000, DLT™2000XT, and DLT™8000 cartridge tape drive or the DLT™2500,

DLT™2500XT, DLT™2700, DLT™2700XT tape mini-library. HP-UX, however, will not recognize these

models, but instead, will attempt to apply generic tape drive parameters. This may limit drive

performance and these models are not supported with HP-UX fbackup/frecover command in this version

of HP-UX.

The following section describes how to install a DLTtape tape peripheral on an HP9000/800 system

running HP-UX 9.04. This note assumes that the DLTtape tape peripheral you are installing conforms to

the SCSI-2 standard.

Installation

Instructions will cover the installation of the DLT tape peripheral hardware and configuration of the system

to communicate with the DLT tape peripheral. The installation requires a patch that you obtain from

Hewlett-Packard be installed on your system. This will allow the system to recognition of the DLT drive.

The patch ID and title currently is:

PHKL_12056 - s800 9.04 HP-PB SE SCSI and tape driver cumulative patch

Also, if you intend to use your DLT drive with HP’s fbackup/frecover utility, you will need the following

patch:

PHCO_6738 - s700_800 9.X cumulative fbackup(1M) and frecover(1M) patch

Using a web browser, you can download the patches from Hewlett-Packard’s Electronic Support Center

web site. The URL is http://us-support.external.hp.com/. Note that because of the nature of Hewlett-

Packard’s patch database, patch ID’s are subject to change. A patch whose ID no longer exists can be

identified by its title.

Before you install the patch, make sure the system has tape2tape device driver included in the kernel.

This can be accomplished using HP's SAM utility.

Quantum Corporation DLTtapeApplication Note

_____________________________________________________________________________________________

Perform the installation as follows:

Shut down the HP9000/800 and remove ac power from the system. Install the DLT tape peripheral and

connect it to its SCSI controller. Depending on the DLT tape peripheral you are installing, refer to one of

the following manuals for switch and jumper settings and SCSI bus termination:

DLT2000/DLT2700 product manual (order number 81-109132)

DLT2500 owner's manual (order number 81-109374)

DLT2000XT/DLT2500XT/DLT2700XT product manual (order number 81-109253)

DLT4000/DLT4500/DLT4700 product manual (order number 81-106336)

DLT7000 tape Drive product manual (order number 81-60000)

DLT8000 tape Drive product manual (order number 81-60118)

•Set the DLT SCSI device address to an unassigned SCSI ID.

•Turn power on and boot the system. Log on as root.

•Copy patch to the /tmp directory.

•Change directory to /tmp.

•Enter the following command to unpack the patch:

sh <PATCH>

<PATCH>is the patch file name.

To complete the patch installations, follow the instructions as described in /tmp/<PATCH>.text. Some of

the patch installations may include a system reboot. Once the patch is installed, the installation will be

complete.

Files /tmp/<PATCH>.text and /etc/newconfig/DLT.README may contain additional information regarding

DLTtape device verification and use. Although the fbackup command appears to work with DLTtape tape

peripherals, it should be noted that the frecover command does not.

Autres manuels pour DLTtape DLT 4000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum StorNext QD7000 Manuel d'installation et d'exploitation

Quantum

Quantum Scalar LTFS Manuel de la liste des pièces

Quantum

Quantum DX100 Manuel utilisateur

Quantum

Quantum Scalar i40 Manuel utilisateur

Quantum

Quantum FIREBALL PLUS AS 10.2 Manuel utilisateur

Quantum

Quantum DX3000 Manuel utilisateur

Quantum

Quantum Scalar 100 Manuel utilisateur

Quantum

Quantum LTO-8 HH SAS Manuel du produit

Quantum

Quantum F2000 Manuel utilisateur

Quantum

Quantum StorNext QD6000 Manuel utilisateur

Quantum

Quantum QXS-448 Manuel utilisateur

Quantum

Quantum PowerStor L200 Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS80 Manuel utilisateur

Quantum

Quantum Scalar 24 Mode d’emploi

Quantum

Quantum DXi4700 Manuel utilisateur

Quantum

Quantum P1000 Series Manuel utilisateur

Quantum

Quantum DXi6900-S Guide de démarrage rapide

Quantum

Quantum StorNext QM1200 Manuel utilisateur

Quantum

Quantum Scalar i500 Comment utiliser

Quantum

Quantum P3000 Series Manuel utilisateur

Quantum

Quantum Atlas V Manuel utilisateur

Quantum

Quantum 4000 Enhanced Mode d'emploi

Quantum

Quantum E240 Manuel utilisateur

Quantum

Quantum Scalar i6000 Manuel d'utilisation et d'entretien

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur