PEERLESS Vision-Point LCV 100 Mode d’emploi

ISSUED: 11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 4

Model

LCV 100

Part # QTY. DESCRIPTION

A090-7008 1 LCD mount assembly

095-8070 hardware pack

AA 1 4" set screw

CC 1 washer

DD 1 nylock nut

FF 1 1/4" allen wrench

GG 1 3/16" allen wrench

B095-4354 1 adapter plate

C504-2013 4 M4 x .7 x 12 mm phillips screw

D 504-2014 4 M4 x .7 x 20 mm phillips screw

E590-5003 4 .198 x .313 x .437 H retaining spacer

F 520-2175 2 1/4-20 x .5 phillips screw

IMPORTANT! Read entire instruction sheet before you start assembly and installation.

Model: LCV 100

PART LIST

Installation &Assembly - Vision•Point™ Vertical Desktop Mount with Stationary

Base & Vision•Point™ Vertical Desktop Mount with Swivel Base

LCV 100

Thread set screw (AA) into the hole on the bottom of LCD assembly (A) using 3/16" allen wrench (GG) as shown.

LCV 100

Bottom View

Note: Compare screws to full

scale drawings to make sure you

are using the correct screw.

Note: You may not need all hardware provided

Important: The product is made to support screens with a VESA®compliant hole pattern. For safe mounting, mount-

ing screws must turn at least three times in the screen inserts.

• The LCV 100 can be mounted to most wood and/or wood composite surfaces up to 1.5" thick. Before installation, the

installer MUST ensure that the mounting surface will safely hold the combined weight of the mount and the screen.

The surface must be at least 3/4" thick.

CAUTION

ISSUED:11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 4

Drill a 1/2" hole in the desired location of the desktop. Drop set screw (AA) for LCV 100 through the hole (placing

1" base over the hole for LCV 100 model. Fasten LCD assembly with washer (CC) and lock nut (DD) as shown.

1" base

FIGURE 1

Attach adapter plate (B) to LCV 100 (A) using 2 1/4-20 x .5 phillips screws (F) as shown.

ISSUED: 11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 4

hex head screw

Attach mount assembly (A) to monitor using four M4 x 12 mm screws (C) in either the 75 MM or

the 100 MM hole pattern as shown. If necessary use four M4 x 20mm screws (D) and retaining

spacers(E)providedwithadapterplate.

FOR INSTALLING TO VESA 75 MM, 100 MM

Forinstallingthemounting plate to theLCDmonitor,readthe following references:

For installing to VESA 75 mm and VESA 100 mm, see below.

For installing to existing Peerless®adapter plate, go to page 4.

In order to be able to safely place the monitor onto the mount, you must first tilt the upright backward about

5°asindicatedbelow:

For the LCV 100 model, loosen the hex head screws using allen wrench (FF), tilt the upright 5° and tighten

the hex head screws.

Other tilt adjustments will be done later.

GENERIC LCD SCREEN

ISSUED:11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

4 of 4

To adjust upright in a backward tilt position: Hold the screen with one hand, and loosen the hex head screws with

allen wrench (FF).Moveuprightin the desired backward tilt position and tightenhexheadscrews.

To adjust upright in a forward tilt position: hold screen with one hand, and loosen the hex head screws with allen

wrench (FF). Place upright in the desired forward tilt position and tighten hex head screws.

If the upright keeps moving forward use allen wrench (FF) and tighten the hex head screws at the bottom

of the assembly as shown below.

hex head screw

FOR INSTALLING TO EXISTING PEERLESS ADAPTER PLATE

Note: Refertoadapter bracket instruction sheetforattachmentof adapterbracketto monitor.

Attach interface plate (B)toexistingadapter plate using four M5 x 6 mm screws providedwithadapterplateas shown to

theright.

IMPORTANT! Hole on bottom denotes bottom of adapter plate as shown in detail 2.

GENERICADAPTER

PLATE

GENERIC LCD SCREEN

M5 X 6 MM SCREWS

(PROVIDEDWITH

ADAPTERPLATE)

DETAIL 2

TOP

BOTTOM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PEERLESS Support et étagère

PEERLESS

PEERLESS SF630P-S and assembly Mode d’emploi

PEERLESS

PEERLESS Perfect Mount PMF2X2 Manuel utilisateur

PEERLESS

PEERLESS WSP700 Mode d’emploi

PEERLESS

PEERLESS MIS 213 Mode d’emploi

PEERLESS

PEERLESS PRS-KIT0811 Mode d’emploi

PEERLESS

PEERLESS LCT Series Mode d’emploi

PEERLESS

PEERLESS SmartMount RTFPA45 Mode d’emploi

PEERLESS

PEERLESS DST360 Mode d’emploi

PEERLESS

PEERLESS IWB600-WB Manuel utilisateur

PEERLESS

PEERLESS PLT BLK Mode d’emploi

PEERLESS

PEERLESS Paramount PPF Mode d’emploi

PEERLESS

PEERLESS PARAMOUNT PSP2-S Mode d’emploi

PEERLESS

PEERLESS PLCM 3 Mode d’emploi

PEERLESS

PEERLESS DS246 Mode d’emploi

PEERLESS

PEERLESS PARAMOUNT PA730 Mode d’emploi

PEERLESS

PEERLESS SOLID-POINT PLCM1CP Mode d’emploi

PEERLESS

PEERLESS WMJ 018 Mode d’emploi

PEERLESS

PEERLESS PARAMOUNT PT650 and assembly Mode d’emploi

PEERLESS

PEERLESS LDM233K Mode d’emploi

PEERLESS

PEERLESS SmartMount SF650 Mode d’emploi

PEERLESS

PEERLESS SAL730P Mode d’emploi

PEERLESS

PEERLESS ACC605 Mode d’emploi

PEERLESS

PEERLESS Solid-Point PLB 1 Mode d’emploi

PEERLESS

PEERLESS Smartmount Mode d’emploi

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur