Olympia electronics Classic Light Series Manuel utilisateur

220-240V AC/50-60Hz

Bayblend FR3010, transparent polycarbonate

TECHNICAL CHARACTERISTICS (for LED MODULE Specs. see page 2)

OPERATION TEMPERATURE RANGE

RELATIVE HUMIDITY

EXTERNAL DIMENSIONS

CONSTRUCTION MATERIALS

TYPICAL WEIGHT

GUARANTEE

OPERATION VOLTAGE

MAXIMUM POWER CONSUMPTION

BATTERY (Ni-Cd)

CHARGING TIME

INDICATIONS - CONTROLS

BATTERY PROTECTION

MINIMUM AUTONOMOUS DURATION

DEGREES OF COVER PROTECTION

PRODUCED IN ACCORDANCE WITH

ILLUMINATION (mains/emergency)

ILLUMINATION SOURCE

24h

Battery charging LED, TEST button

From overcharge and deep discharge

5 to 40 C

Up to 95%

3 years (1 year for the battery)

262 x 100 x 70 mm

White LEDs

3W / 4VA

IP20

3.6V/1Ah

180 min

590gr.

30lm/75lm

EN 60598-1, EN 60598-2-22, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3

‘’ CLASSIC LIGHT ‘’ SERIES FOR

NON MAINTAINED / MAINTAINED (OPTIONAL) LUMINAIRES

GENERAL

These luminaires are used indoors (ta 40 C) where emergency light

is needed.

Each luminaire must be permanently connected to mains power

supply.

In normal operation the led strip lights and the battery is charging.

In case of a mains power supply failure the luminaire will light the led

strip automatically in emergency mode. When the mains power

supply is restored the device turns to normal operation.

NON MAINTAINED OPERATION

By default the luminaire operates as maintained. The luminaire has a

possibility to operate as non maintained. To change the maintained

to non maintained operation follow the relative instructions on page

LED STRIP CHECK (with normal power supply in maintained

operation or in emergency operation with the led strip powered).

By pressing continuously the (led strip check) button, an intentional

disconnection of the led strip is carried out and that is indicated by

the red indication led. When the button is released the indication led

will be turned off. So in every disconnection of the led strip, the red

led will indicate it.

INSTALLATION

To install the luminaire follow the installation instructions on page 2.

ΑΤΤΕΝΤΙΟΝ!!!

1. Operations for installation, maintainance or testing must be done

by authorized personnel only.

2. The device must be connected to the mains power supply through

a fuse dependent by the total amount of the line’s power load.

3. It is suggested to check every month the indication LED for battery

charging, and by

pushing the TEST button to check the emergency circuit. The led

strip should: a) light with bigger intensity as long as the TEST button

is pressed (maintained operation),

b) light as long as the TEST button is pressed (non-maintained

operation).

4. It is suggested to check every 6 months the minimum autononous

duration by disconnecting

the mains power supply. Count the time that the led strip lights and

in case of less time than the minimum autonomous duration the

battery must be replaced. If the measured time is considerably less

than the minimum autonomous duration In case

If the luminaire doesn’t work as described above contact

the installer.

contact the installer.

of battery or led strip replacement, these must be replaced by parts of

the same type

t i

in battery recycling points. Do not

incinerate.

5. In case of inactive use for a period greater than 2 months,

disconnect the battery by pulling out the battery’s connector.

6. I s not allowed to discard batteries in to common trash bins,

they must be discarded only

GR-151-3/L

923151004_09_007

Page 1 of 3

Thank you for your trust in our products

Olympia Electronics - European manufacturer

923151004_09_007

Page 2 of 3

LED MODULE CHARACTERISTICS

Olympia Electronics S.A.

Cable connection between main pcb and led module

8.7-10.8VDC

0.59W

2801101

GR-151-3/L

45 °C max. across the board

INSTALLATION INSTRUCTIONS

1 Detach the plastic base (located in the bottom of the luminaire) by pulling the unlock hook and

pass the cables from area or and through the cable entry hole. The luminaire must be

connected to a permanent electrical installation to ensure the immobilization of the cable. Mount

the plastic base with the included mounting accessories.

2 Connect the mains cables to the respective detachable terminal block. Ν for neutral, L for live

wire.

3 Attach the luminaire by sliding it on the plastic base until the plastic hook locks, and power the

Luminaire.

MAINTAINED TO NON MAINTAINED SELECTION CAPABILITY

4 Power on the luminaire and press continuously the TEST button for 10 seconds, until the battery

charging LED blinks and the led strip turns off. The luminaire operates now as non maintained

luminaire. If you want to restore the previous condition (maintained operation), press

continuously the TEST button for 10 seconds, until the battery charging LED blinks and the led

strip lights with less luminosity.

NOTE!! After finishing the installation you must power the device at least for 24 hours for battery charging to perform the nominal

autonomy.

1Lock - unlock hook

L230V AC

NPlastic base

Cable entry hole

N L

Manufacturer

Model Number

Voltage Range

Connections

Nominal Power

Temperature (tc)

923151004_09_007

Page 3 of 3

The light source contained in this luminaire shall only be replaced by the manufacturer, or his agent, or a similar qualified person.

NOTE! The light source is non-user replaceable.

(*) Maintained operation: The luminaire lights its illumination source, when it is powered by the mains power supply or not.

Non Maintained operation: The luminaire lights its illumination source, only in power supply’s failure.

Note!! The installer should fill in, on the specification label,

the letter G if the luminaire is used as a safety sign.

WARRANTY

Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty is specified in the official catalogue of

Olympia Electronics and also in the technical leaflet, which accompanies each product. This warranty ceases to exist if the buyer does not follow

the technical instructions included in official documents given by Olympia Electronics or if the buyer modifies the goods provided or has any

repairs or re-setting done by a third party, unless Olympia Electronics has fully agreed to them in writing. Products that have been damaged can

be returned to the premises of our company for repair or replacement, as long as the warranty period is valid.

Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the buyer depending on the reason of

defection. Olympia Electronics reserves the right to charge or not the buyer the transportation cost.

HEAD OFFICE

72nd km. O.N.R. Thessaloniki-Katerini

P.C. 60300 P.O. Box 06 Εginio Pierias Greece

www.olympia-electronics.gr

[email protected]

1X 1 8 0A G

NOTE: LED= Light Emitting Diode

LABELING EXPLANATION:

X: Self contained

1: Maintained (*)

A: Including test device

G: Internally illuminated safety sign

*180: 3 hours duration

Battery replacement

It can be done only by a competent person and after the mains interruption

1. Detach the luminaire from its base (step 1 of the installation

procedure).

2. Use a flat blade screwdriver to remove the diffusor.

3. Remove the reflector.

4. Disconnect the connector and remove the old battery.

5. Connect the new battery with the same type and place it in

the position of the old one.

6. Replace the removed parts (step 1, 2 and 3).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels olympia electronics Lanterne

olympia electronics

olympia electronics GR-108/12L/90 Manuel utilisateur

olympia electronics

olympia electronics POWER LIGHT Series Manuel utilisateur

olympia electronics

olympia electronics GR-290/WP/M Manuel utilisateur

olympia electronics

olympia electronics GRL-29 WP Manuel utilisateur

olympia electronics

olympia electronics GR-427/12L Manuel utilisateur

olympia electronics

olympia electronics WEATHER LIGHT Series Manuel utilisateur

olympia electronics

olympia electronics SLD-28/DZ Manuel utilisateur

olympia electronics

olympia electronics GR-427/12L/MAR Manuel utilisateur

olympia electronics

olympia electronics POWER LIGHT Series Manuel utilisateur

olympia electronics

olympia electronics OLY-1004/WP/ADR Manuel utilisateur

olympia electronics

olympia electronics GR-796/ST/DUO/ADR Manuel utilisateur

olympia electronics

olympia electronics GR-8/leds Manuel utilisateur

olympia electronics

olympia electronics GRL-38/90/M Manuel utilisateur

olympia electronics

olympia electronics GRL-37/90/WP Manuel utilisateur

olympia electronics

olympia electronics CLASSIC LIGHT Series Manuel utilisateur

olympia electronics

olympia electronics KLIN-20/ST/ADR Manuel utilisateur

olympia electronics

olympia electronics OLY-1004 Manuel utilisateur

olympia electronics

olympia electronics GR-900/30L/SC Manuel utilisateur

olympia electronics

olympia electronics GR-579/L/90/WP Manuel utilisateur

olympia electronics

olympia electronics GR-8/leds Manuel utilisateur

olympia electronics

olympia electronics KLIN-20/ST Manuel utilisateur

olympia electronics

olympia electronics GRL-37/90/ADR Manuel utilisateur

olympia electronics

olympia electronics BAU LIGHT Series Manuel utilisateur

olympia electronics

olympia electronics WATERPROOF POWER LIGHT Series Manuel utilisateur

Manuels Lanterne populaires d'autres marques

KYOWA

KYOWA KW-9114 Manuel utilisateur

Stahl

Stahl ECOLUX 6610 Series Manuel utilisateur

SNOWJOE

SNOWJOE SUNJOE 24V-LGT500-CT Manuel utilisateur

PRG

PRG VARI LITE VL5 Manuel utilisateur

Raytec

Raytec VARIO2 series Manuel utilisateur

ENSA

ENSA LEDBT18WS2 Manuel utilisateur

LUG

LUG OFFICE LB LED N/T Manuel utilisateur

GE Wallighter 250 Manuel utilisateur

Draper

Draper RLEDL19/B Manuel utilisateur

Green Lighting

Green Lighting TRI-SENSOR GL4612LU Manuel utilisateur

Panasonic

Panasonic EY3741B57 Manuel utilisateur

Clas Ohlson

Clas Ohlson LCC8T Manuel utilisateur

Coolon

Coolon WDN-140 Manuel utilisateur

Holiday Travel

Holiday Travel 834873 Manuel utilisateur

BEGA

BEGA 84 036 Manuel utilisateur

BEGA

BEGA 33 596 Manuel utilisateur

Dale Tiffany

Dale Tiffany GT701162 Manuel utilisateur

Wagan

Wagan Brite Nite Pop-Up USB Lantern Manuel utilisateur

olympia electronics Classic Light Series Manuel utilisateur

Manuels Lanterne populaires d'autres marques