NXP Semiconductors OM5578 PN7150 Manuel utilisateur

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

Rev. 1.2 — 19 August 2016

373012

Application note

COMPANY PUBLIC

Document information

Info

Content

Keywords

OM5578, PN7150, Arduino, Kinetis, UDOO, LPC, NFC, P2P, Card

Emulation, Linux, Android, NullOS, RTOS

Abstract

This document gives a description on how to get started with the OM5578

PN7150 NFC Controller SBC Kit on boards featuring Arduino compatible

header.

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

2 of 21

Contact information

For more information, please visit:

http://www.nxp.com

Revision history

Rev

Date

Description

1.2

20160819

Added Android Marshmallow demo

1.1

20160620

Added Android NFC demo on UDOO Neo

1.0

20160518

First official release

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

3 of 21

1. Introduction

This document gives a description on how to get started with the OM5578 PN7150 NFC-

Controller SBC Kit on platform featuring Arduino compatible header. This document

provides a step by step guide to the installation procedure of the hardware and the

software. Finally it shows PN7150 NFC Controller functionalities through demonstration

application.

1.1 OM5578/PN7150ARD demo kit

OM5578/PN7150ARD kit is a high performance fully NFC compliant expansion board

compatible with Arduino Compatible Interface platforms (refer to [1] for more details). It

meets compliance with Reader mode, P2P mode and Card emulation mode standards.

The board features an integrated high performance RF antenna to insure high

interoperability level with NFC devices.

The demo kit is comprised of a PN7150 NFC Controller Board, a dedicated interface

board, and a NFC Sample Card.

OM5578/PN7150S

PN7150 NFC Controller Board

OM29110ARD

Arduino Interface Board

NTAG216

NFC Sample Card

Fig 1. OM5578/ARD kit overview

The demo kit is fully described in UM10935 document [8].

1.2 Linux driver support

PN7150 NFC Controller is supported under GNU/Linux system using the NXP Linux

libnfc-nci software stack delivered through public GitHub repository

www.nxp.com/redirect/github.com/NXPNFCLinux/linux_libnfc-nci# (for more details, refer

to AN11697 [5]).

In chapter 2.4 it is described how to run an image with the already integrated driver on

your kit.

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

4 of 21

1.3 Android driver support

PN7150 NFC Controller is supported from the official Android Open Source Project (refer

to [7] for more details) with the addition of dedicated patches (refer to AN11690 [6]).

In chapter 2.5 it is described how to run an image with the already integrated driver on

your kit.

1.4 RTOS and Null OS support

Since implementing NFC Forum NCI standardized API, the PN7150 NFC Controller can

be easily integrated into system based on RTOS or even without OS.

Code example are given in the scope of LPCXpresso and Kinetis Design Studio projects

and can easily be ported to any other system.

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

5 of 21

2. Quick Startup on UDOO Neo

2.1 Required items

• UDOO Neo [2]

• Compatible MicroSD card of at least 4 Gb memory size (8 Gb for Android demo image)

• Computer (running Windows, Linux or Mac OS X) for SD/MicroSD card installation and

remote access to UDOO Neo

• Micro USB cable to connect UDOO Neo to the computer

• UDOO Neo demo image file (see [9])

• Other than for Linux NFC demo (see 2.4), where UDOO Neo is run as a headless IoT

device, one need for the Android NFC demo (see 2.5) in addition the following items:

- USB Mouse

- Micro HDMI cable to connect to Monitor / TV

- UDOO 12V power supply (Note: the 5V generated by UDOO Neo board from

the Micro USB is not stable on the Android image. Without the 12V power

supply the RF discovery may suddenly stop)

2.2 Hardware preparation

First of all assemble the PN7150 NFC Controller Board with the Arduino Interface Board.

Fig 2. OM5578/PN7150ARD demo kit assembly

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

6 of 21

Then stacked together the boards with the UDOO Neo.

Fig 3. OM5578/PN7150ARD and UDOO Neo stacked together

Note: The UDOO Neo feature a “two rows” connectors, the demo kit must be plugged in

the inner ones as show in below picture:

Fig 4. OM5578/PN7150ARD and UDOO Neo stacked together - zoom

2.3 Software preparation

The MicroSD needs to store an image specific for the OM5578 Linux or Android NFC

demo. This demo image can be downloaded from [9] and loaded to the MicroSD card,

following the installation guidelines provided here: http://www.udoo.org/docs-

neo/Getting_Started/Create_a_bootable_MicroSD_card_for_UDOO_Neo.html

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

7 of 21

2.4 Linux NFC demo application

2.4.1 Application details

The demo application uses a part of the Linux libnfc-nci stack available on public GitHub

repository www.nxp.com/redirect/github.com/NXPNFCLinux/linux_libnfc-nci. The related

source code can then be found there (more details in document AN11697 [5]).

2.4.2 Starting the application

Start the UDOO Neo board as “USB Headless IoT Device”, by just inserting the Micro-SD

card in the related slot and connect the micro-USB cable to your PC. Be sure to have

installed the right driver specific for the USB connection, refer to

http://www.udoo.org/docs-neo/Basic_Setup/Usb_Direct_Connection.html.

Open a remote session through “Web Control Panel” by browsing to “192.168.7.2” in a

web browser, it should display the UDOO Neo platform dashboard:

Fig 5. UDOO dashboard

Then open a terminal session by clicking on “>_ REMOTE TERMINAL” button.

Note: there is other way to open a remote terminal allowing to run the demo application.

Refer to http://www.udoo.org/docs-neo/Getting_Started/Use_as_a_Computer.html and

http://www.udoo.org/docs-neo/Getting_Started/Use_as_a_headless_IoT_Device.html for

more details.

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

8 of 21

Login: udooer

Password: udooer

Fig 6. UDOO Remote Terminal

Then browse to the Linux libnfc-nci stack directory (refer to chapter 1.2 for more details

about the Linux NFC software stack).

$ cd ~/linux_libnfc-nci

The application requires parameters to run:

$ ./nfcDemoApp <OPTIONS>

You can get the parameters details by launching the application help menu:

$ ./nfcDemoApp –-help

Fig 7. Linux demo application parameters

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

9 of 21

The demo application offers 3 modes of operation:

•Polling: continuously waiting for a remote NFC device (tag or peer device) and

displays related information

•Tag writing: allows writing NDEF content to a NFC tag

•Tag emulation: allows sharing NDEF content to a NFC reader device

•Device push: allows pushing NDEF content to a remote NFC peer device

2.4.2.1 Polling mode

When in this mode, the application will display information of any discovered NFC tags or

remote NFC device. It is reached starting the application with “poll” parameter:

$ ./nfcDemoApp poll

Fig 8. Linux demo application polling mode

2.4.2.2 Device push mode

This mode allows pushing data to a remote NFC device (e.g. an NFC phone). It is

reached using “push” parameter:

$ ./nfcDemoApp push <OPTIONS>

Fig 9. Linux demo application device push mode

NXP Semiconductors

AN11841

PN7150 Arduino SBC Kit Quick Start Guide

AN11841

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 19 August 2016

373012

10 of 21

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp push –-help

2.4.2.3 Tag emulation mode

This mode allows emulating an NFC tag (NFC Forum T4T) to share data to a remote

NFC reader (e.g. an NFC phone). It is reached using “share” parameter:

$ ./nfcDemoApp share <OPTIONS>

Fig 10. Linux demo application Tag emulation mode

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp share –-help

2.4.2.4 Tag writing mode

This mode allows writing data to an NFC tag. It is reached using “write” parameter:

$ ./nfcDemoApp write <OPTIONS>

Autres manuels pour OM5578 PN7150

Table des matières

Autres manuels NXP Semiconductors Microcontrôleur

NXP Semiconductors

NXP Semiconductors S12 MagniV MC9S12ZVML128 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC18xx series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale TWR-MECH Manuel utilisateur

NXP Semiconductors

NXP Semiconductors P89LPC9321 UM10310 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale Kinetis TWR-KV58F220M Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MC9S12XS256 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors S12ZVML-MINIKIT Manuel utilisateur

NXP Semiconductors

NXP Semiconductors S32K324 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors AN11524 Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors UM11733 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale Xtrinsic LFSTBEB865X Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MPC574 P Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors KL25 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors UM11579 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors AN10815 Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors USB-KW38 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors AN11268 Guide de dépannage

NXP Semiconductors

NXP Semiconductors TWR-K60N512-IAR Manuel utilisateur

NXP Semiconductors

NXP Semiconductors KITMPXA6115AEVB Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MPC5748G Low Cost EVB Manuel utilisateur

NXP Semiconductors

NXP Semiconductors WB10-AT i.MX 8M Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale semiconductor CSM12D Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MRF300AN Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC43 Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur