Moxa Technologies MGate W5108 series Manuel utilisateur

P/N: 1802051080011

*1802051080011*

MGate W5108/W5208 Series

Quick Installation Guide

Edition 2.0, May 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

- 2 -

Overview

The MGate W5108/W5208 series of gateways come with 1 or 2 serial

ports, making them an ideal choice for connecting Modbus/DNP3 serial

devices to a wireless LAN. With IEEE 802.11a/b/g/n support, you can use

fewer cables in difficult wiring environments, and for secure data

transmission, the MGate W5108/W5208 series gateways support

WEP/WPA/WPA2. The gateways’ rugged design makes them suitable for

industrial applications, including oil & gas, power plant, process

automation, and factory automation.

Package Checklist

Before installing the MGate W5108/W5208 gateway, verify that the

package contains the following items:

•1 MGate W5108 or W5208 gateway

•1 antenna

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•Mini DB9F-to-TB Adapter: DB9 female to terminal block adapter

for RS-422/485 applications

•WK-51-01: Wall mounting kit

•DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85

to 264 VAC input

•DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal

85 to 264 VAC input

•DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132

VAC or 176 to 264 VAC input, selected by DIP switch

Notify your sales representative if any of the above items are missing or

damaged.

Hardware Introduction

As shown in the following figures, the MGate W5108 has 1 DB9 port for

transmitting serial data, and the MGate W5208 has 2 DB9 ports for

transmitting serial data. The MGate W5108/W5208 gateways come with 2

kV serial port isolation protection built in.

- 3 -

MGate W5108

MGate W5208

- 4 -

Reset Button—Depress the Reset button continuously for 5 sec to load

factory defaults.

The reset button is used to load factory defaults. Depress the reset button

for five seconds using a pointed object, such as a straightened paper clip.

Release the reset button when the Ready LED stops blinking.

LED Indicators

Name

Color

Function

PWR 1,

PWR 2

Green

Power is being supplied to the power input.

Off

Power cable is not connected.

Ready

Green

Steady on: Power is on and unit is functioning

normally.

Blinking: Unit is responding to DSU’s locate function.

Red

Steady on: Power is on and the unit is booting up.

Blinking: IP conflict, DHCP, or BOOTP server did not

respond properly, or a relay output occurred.

Off

Power is off.

P1, P2

Green

Serial port is transmitting data.

Amber

Serial port is receiving data.

Off

Data is not being transmitted.

Ethernet

Green

Indicates a 100 Mbps Ethernet connection.

Amber

Indicates a 10 Mbps Ethernet connection.

Off

Ethernet cable is disconnected.

WLAN

Green

Steady On: Unit is properly connected with the AP.

Blinking: Unit is trying to connect to the AP.

Red

Indicates an IP conflict, or DHCP or BOOTP server is

not responding properly.

RF Green

3 LEDs = signal strength is between 67% and 100%.

2 LEDs = signal strength is between 34% and 66%.

1 LED = signal strength is between 0% and 33%.

Hardware Installation Procedure

STEP 1:

After unpacking the unit, connect the power supply to the unit.

STEP 2:

Use an Ethernet cable to connect the unit to the

network.

STEP 3:

Connect your device to the desired port on the unit.

STEP 4:

Place or mount the unit. The unit may be placed on a

horizontal surface such as a desktop, or mounted on the wall.

Wall or Cabinet Mounting

wo metal plates are provided for mounting the unit

on a wall or inside a cabinet. Attach the plates to the

unit

’s rear panel with screws. With the plates

attached, use screws to mount the unit on a wall.

For each screw, the head should be 6.0 mm

or less in

diameter, and the shaft should be 3.5 mm or less in

diameter.

Termination Resistor and Adjustable Pull High/Low Resistors

In some critical environments, you may need to add termination resistors

to prevent the reflection of serial signals. When using termination

- 5 -

resistors, it is important to set the pull high/low resistors correctly so that

the electrical signal is not corrupted. The MGate W5108/W5208 uses DIP

switches to set the pull high/low resistor values for each serial port.

To add a 120 Ω termination resistor, set switch 3 on the port’s

assigned DIP switch to ON; set switch 3 to OFF (the default setting) to

disable the termination resistor.

To set the pull high/low resistors to 150 KΩ, set switches 1 and 2 on

the port’s assigned DIP switch to OFF. This is the default setting.

To set the pull high/low resistors to 1 KΩ, set switches 1 and 2 on

the port’s assigned DIP switch to ON.

Pull High/low Resistors for the RS-485 Port

Default

Pull High

Pull Low

Terminator

1 KΩ

120 Ω

OFF

150 KΩ

–

Software Installation Information

To configure your MGate W5108/W5208, connect the gateway’s Ethernet

port directly to your computer’s Ethernet port and then log in from a web

browser. The default IP address is 192.168.127.254. The MGate supports

two types of accounts: admin and user. The admin account can modify

all settings, whereas the user accounts can only view settings. The

default password for the admin account is “moxa”.

If you forget the modified IP address of the gateway or cannot log in to

the gateway via a web browser for any reason, you can access the

gateway via a direct Ethernet cable connection using the Device search

utility to search for the gateway.

To install Device Search Utility (DSU), insert the MGate

Documentation and Software CD into your PC’s CD-ROM drive, and

then run the following setup program to begin the installation process

from the “Software” directory:

dsu_setup_[Version]_Build_[DateTime].exe

The filename of the latest version may have the following format:

dsu_setup_Verx.x.x_Build_xxxxxxxx.exe.

For detailed information about DSU, refer to the MGate W5108/W5208

User’s Manual, which can be found in the “Document” directory.

- 6 -

Pin Assignments

RJ45 (LAN)

LAN

Tx+

Tx-

Rx+

–

Rx-

–

DB9 Male (RS-232/422/485)

Pin RS-232

RS-422/

RS-485-4W

RS-485-2W

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Power Input and Relay Output Pinouts

V2+ V2-

V1+ V1-

DC Power

Input 2

DC Power

Input 2

N.O. Common N.C. DC Power

Input 1

DC Power

Input 1

DI/DO Pinouts

COM

DI0

DI1

GND

DO0

DO1

Common

Digital

Input 0

Digital

Input 1

Ground

Digital

Output 0

Digital

Output 1

- 7 -

Specifications

Power Input

9 to 60 VDC

Power Consumption

495 mA @ 9 V, 202 mA @ 24 V,

114 mA @ 48 V, 99 mA @ 60 V

Operating Temperature

Standard models:

0 to 60°C (32 to 140°F)

Wide temp. models:

-40 to 75°C (-40 to 167°F) for -T models

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Dimensions (W x D x H)

MGate W5108:

45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)

MGate W5208:

59.6 x 101.7 x 134 mm (2.35 x 4.0 x 5.28 in)

Magnetic Isolation

1.5 kV for Ethernet,

2 kV for serial port

Regulatory Approvals FCC Class A, CE Class A, EN 60950-1,

UL61010-2-201

Hazard Location

Class 1 Division 2, ATEX, IECEx

Fault Relay Circuit

3-pin circuit with current carrying capacity of

2 A @ 30 VDC

ATEX Information

1. Certificate number: DEMKO 16 ATEX 1641X

2. Certification string: Ex nA nC IIC T4 Gc

3. Standards covered:

EN 60079-0:2012+A11:2013, EN 60079-15:2010

4. The equipment shall be installed in an enclosure that provides a

degree of protection not less than IP54 in accordance with EN

60079-15 and accessible only by the use of a tool.

5. These products are for use in an area of not more than pollution

degree 2 in accordance with IEC 60664-1.

Autres manuels pour MGate W5108 series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies OnCell G3111-HSPA series Manuel utilisateur

Moxa Technologies

Moxa Technologies 6110 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3480 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5217 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5135 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5119 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3270 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5135 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5134 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170 Manuel utilisateur

Moxa Technologies

Moxa Technologies SMG-6100 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3111 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5109 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5108 series Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur