Moxa Technologies MGate MB3270 Manuel utilisateur

– 1 – – 2 – – 3 –

P/N: 1802031700014

*1802031700014*

MGate MB3170 and MB3270

Quick Installation Guide

Seventh Edition, July 2015

Overview

The MGate MB3170 and MB3270 are 1 and 2-port advanced

Modbus gateways that convert between Modbus TCP and Modbus

ASCII/RTU protocols. They can be used to allow Ethernet masters

to control serial slaves, or to allow serial masters to control

Ethernet slaves. Up to 16 TCP masters and 31 serial slaves can be

connected simultaneously.

Package Checklist

Before installing the MGate MB3170 or MB3270, verify that the

package contains the following items:

•MGate MB3170 or MB3270 Modbus gateway

•Document & Software CD

•Quick Installation Guide

•Product Warranty Statement

Optional Accessories:

•DK-35A: DIN-rail mounting kit (35 mm)

•Mini DB9F-to-TB Adaptor: DB9 female to terminal block

adapter

•DR-4524: 45W/2A DIN-rail 24 VDC power supply with

universal 85 to 264 VAC input

•DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with

universal 85 to 264 VAC input

•DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88

to 132 VAC/176 to 264 VAC input by switch

Please notify your sales representative if any of the above items is

missing or damaged.

Hardware Introduction

LED Indicators

Name

Color

Function

PWR1

Red

Power is being supplied to the power input

PWR2

Red

Power is being supplied to the power input

RDY

Red

Steady: Power is on and the unit is booting up

Blinking: IP conflict, DHCP or BOOTP server did

not respond properly, or a relay output

occurred

Green

Steady: Power is on and the unit is functioning

normally

Blinking: Unit is responding to locate function

Off

Power is off or power error condition exists

Ethernet

Amber

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected or has a short

P1, P2

Amber

Serial port is receiving data

Green

Serial port is transmitting data

Off

Serial port is not transmitting or receiving data

FX Amber

Steady on: Ethernet fiber connection, but port

is idle.

Blinking: Fiber port is transmitting or receiving

data.

Reset Button

Press the Reset button continuously for 5 sec to load factory

defaults:

The reset button is used to load factory defaults. Use a pointed

object such as a straightened paper clip to hold the reset button

down for five seconds. Release the reset button when the Ready

LED stops blinking.

Panel Layouts

The MGate MB3170 has a male DB9 port and a terminal block for

connecting to serial devices. The MGate MB3270 has two DB9

connectors for connecting to serial devices.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Hardware Installation Procedure

STEP 1:

Use a standard straight-through Ethernet (fiber) cable to

connect the unit to a network hub or switch.

STEP 2:

Connect your device to the unit's serial port.

STEP 3:

Mount the unit on a DIN-rail.

STEP 4:

Connect the power source to power input.

Software Installation Information

To install MGate Manager, insert the MGate Documentation and

Software CD into your PC's CD-ROM drive, and then run the

following setup program to begin the installation process from the

"Software" directory:

MGM_Setup_[Version]_Build_[DateTime].exe

The filename of the latest version may have the following format:

MGM_Setup_Verx.x.x_Build_xxxxxxxx.exe.

For detailed information about MGate Manager, refer to the MGate

MB3000 User's Manual, which can be found in the "Document"

directory.

Pin Assignments

Ethernet Port (RJ45)

Signal

Tx+

Tx-

Rx+

Rx-

Serial Port (Male DB9)

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

–

Serial Port (Terminal Block)

RS-422

RS-485 (4W)

RS-485 (2W)

TxD-(A)

–

TxD+(B)

–

RxD+(B)

Data+(B)

RxD-(A)

Data-(A)

GND

Power Input and Relay Output Pinouts

V2+ V2- V1+ V1-

Shielded

Ground

Power

Input 1

Power

Input 1

N.O. Common

N.C. DC

Power

Input 2

Power

Input 2

Optical Fiber Interface

100BaseFX

Multi-mode

Single-mode

Wavelength

1300 nm

1310 nm

Max. TX

-14 dBm

0 dBm

Min. TX

-20 dBm

-5 dBm

RX Sensitivity

-32 dBm

-34 dBm

Link Budget

12 dB

29 dB

Typical Distance 5 km

4 km

40 kmc

Saturation

-6 dBm

-3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cable

b. 62.5/125 μm, 500 MHz*km fiber optic cable

c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable

Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

MB3170:

MB3170I:

MB3270:

MB3270I:

435 mA @ 12 V, 218 mA @ 24 V,

109 mA @ 48 V

555 mA @ 12 V, 278 mA @ 24 V,

138 mA @ 48 V

435 mA @ 12 V, 218 mA @ 24 V,

109 mA @ 48 V

510 mA @ 12 V, 255 mA @ 24 V,

128 mA @ 48 V

Operating Temperature

0 to 60°C (32 to 140°F),

-40 to 75°C (-40 to 167°F) for –T model

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Magnetic Isolation

Protection (serial)

2 kV (for “I” models)

Dimensions

Without ears:

With ears extended:

29 x 89.2 x 118.5 mm

(1.14 x 3.51 x 4.67 in)

29 x 89.2 x 124.5 mm

(1.14 x 3.51 x 4.90 in)

Relay Output

1 digital relay output to alarm (normal

): current carrying capacity 1 A @

30 VDC

Hazardous Location

UL/cUL Class 1 Division 2 Group

A/B/C/D, ATEX Zone 2, IECEx

ATEX and IECEx Information

DEMKO Certification number: 07 ATEX 0690059X IEC

Certification Number: IECEx UL 13.0023X (only for models with

suffix –CT or –IEX)

2. Ambient Temperature Range (-40°C ≤ Tamb ≤ 75°C)

Certification String: Ex nA IIC T3 Gc

Standards Covered: EN 60079-0:2012/IEC 60079-0 6th Ed.

AND EN 60079-15:2010/IEC 60079-15 4th Ed.

The conditions of safe usage:

•The Ethernet Communications Devices are intended for

mounting in a tool-accessible IP54 enclosure and used in

an area of not more than pollution degree

2 as defined by

IEC 60664-1.

•Conductors suitable for use in an ambient temperature

greater than 114°C must be used for the power supply

terminal.

•A 4mm2 conductor must be used when connection to the

external grounding screw is utilized.

•Provisions shall be made, either in the equipment or

external to the equipment, to prevent the peak rated

voltage being exceeded by the transient disturbances of

more than 140%.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies MGate MB3480 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5208 series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN-T Manuel utilisateur

Moxa Technologies

Moxa Technologies SMG-6100 Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-8410 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies Mgate MB3660 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5118 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies AIG-501-T-AZU-LX Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort 5610 series Feuille d'instructions

Moxa Technologies

Moxa Technologies MGate 5135 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5108 series Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3470A-LTE Manuel d'installation et d'exploitation

Moxa Technologies

Moxa Technologies UC-8580 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5121 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies Mgate MB3660 Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort 4511 Manuel

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3470A-LTE-EU-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3270I Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3110 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur