Moxa Technologies MGate MB3180 Manuel utilisateur

P/N: 1802031800013

*1802031800013*

MGate MB3180

Quick Installation Guide

Version 5.1, October 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The MGate MB3180 is a 1-port Modbus gateway that converts between

Modbus TCP and Modbus ASCII/RTU protocols. It can be used to allow

Ethernet masters to control serial slaves, or to allow serial masters to

control Ethernet slaves. Up to 16 TCP masters and 31 serial slaves can

be connected simultaneously.

Package Checklist

Before installing the MGate MB3180 Modbus gateway, verify that the

package contains the following items:

•1 MGate MB3180 Modbus gateway

•Power adapter

•4 stick-on pads

•Quick installation guide (printed)

•Warranty card

Optional Accessory

•DK-35A: DIN-rail mounting kit (35 mm)

•Mini DB9F-to-TB Adapter: DB9 female to terminal block adapter

Notify your sales representative if any of the above items is missing or

damaged.

NOTE

This product is designed to be powered by a listed power

source marked "LPS" and is rated 12 to 48 VDC and 0.25 A

minimum. The device's operating temperature when using the

power adapter is 0 to 40°C

(32 to 104°F), and 0 to 60°C

(32 to

140

°F)

when using an alternative DC power source. If you need

additional assistance purchasing a power source, please contact

Moxa for more information.

- 3 -

Hardware Introduction

As shown in the following figures, the MGate MB3180 has one DB9 male

port for transmitting serial data.

Reset Button—The reset button is used to load factory defaults. Using

a pointed object such as a straightened paper clip to hold the reset

button down for five seconds. Release the reset button when the Ready

LED stops blinking in order to load the factory defaults.

LED Indicators—Three LED indicators are located on the top panel:

Name

Color

Function

Ready

Red

Steady on:

Power is on and the unit is booting up.

Blinking:

IP conflict exists, or DHCP or BOOTP

server is not responding properly.

Green

Steady on:

Power is on and the unit is functioning

normally.

Blinking: Unit has been found by the Location

command in MGate Manager.

Off

Power is off or power error condition exists.

Ethernet

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected or has a short.

Orange

Unit is receiving data from device.

Green

Unit is transmitting data to device.

Off

No data is being exchanged with device.

- 4 -

Hardware Installation Procedure

STEP 1:

After unpacking the MGate MB3180, connect the power

adapt

er. Make sure that the adapter is connected to an

earthed socket outlet.

STEP 2:

Use a standard straight

through Ethernet cable to connect the

MGate

MB3180 to a network hub or switch. Use a cross-over

Ethernet cable if you are connecting the gateway directly to a

STEP 3:

Connect your device to the MGate MB3180’s serial port.

STEP 4

Place or mount the MGate MB3180. The unit may be placed

on a horizonta

l surface such as a desktop, mounted on a DIN

rail, or mounted on the wall

Wall or Cabinet Mounting

Mounting the MGate MB3180 onto a wall

requires two screws. The head of the screws

should be 5.0 to 7.0 mm in diameter, the

shaft should be 3.0 to 4.0 mm i

n diameter,

and the length of the screws should be at

least 10.5 mm.

DIN-rail Mounting

DIN rail attachments can be purchased separately to mount the MGate

MB3180 on a DIN rail.

Wall Mounting

DIN-rail Mounting

Adjustable Pull High/Low Resistors for the RS-485 Port

In some critical RS-485 environments, you may need to add

termination resistors to prevent the reflection of serial signals. When

using termination resistors, it is important to set the pull high/low

resistors correctly so that the electrical signal is not corrupted. Jumpers

JP3 and JP4 are used to set the pull high/low resistor values for the

serial port. To set the pull high/low resistors to 150 KΩ, which is the

factory default setting, leave the two jumpers open. To set the pull

high/low resistors to 1 KΩ, use the jumper caps to short the two

jumpers.

- 5 -

MGate MB3180 Jumpers

Software Installation

You can download the MGate Manager, User's Manual, and Device

Search Utility (DSU) from Moxa's website: www.moxa.com. Please refer

to the User’s Manual for additional details on using the MGate Manager

and DSU.

The MGate MB3180 also supports login via a web browser.

Default IP address: 192.168.127.254

Default account: admin

Default password: moxa

- 6 -

Pin Assignments

Ethernet Port (RJ45)

Signals

Tx+

Tx-

Rx+

Rx-

Serial Port (Male DB9)

Pin RS-232

RS-422/485

(4-Wire)

RS-485 (2-

Wire)

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Environmental Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

200 mA @ 12 VDC, 60 mA @ 48 VDC

Operating Temperature

0 to 60°C (32 to 140°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Dimensions

With ears:

Without ears:

22 x 75 x 80 mm (0.87 x 2.95 x 3.15 inch)

22 x 52 x 80 mm (0.87 x 2.05 x 3.15 inch)

Autres manuels pour MGate MB3180

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies OnCell G3470A-LTE-EU-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE-EU-T Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3111-HSPA series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE Manuel utilisateur

Moxa Technologies

Moxa Technologies MRC-1002 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort 4511 Manuel utilisateur

Moxa Technologies

Moxa Technologies Mgate MB3660 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5134 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies SMG-6100 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5121 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170I Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-8410 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3110 Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort PCG Manuel

Moxa Technologies

Moxa Technologies OnCell G3470A-LTE Manuel d'installation et d'exploitation

Moxa Technologies

Moxa Technologies MGate 5114 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3110 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5114 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur