Moxa Technologies MGate MB3180 Manuel utilisateur

P/N: 1802031800012

*1802031800012*

MGate MB3180

Quick Installation Guide

Edition 5.0, December 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The MGate MB3180 is a 1-port Modbus gateway that converts between

Modbus TCP and Modbus ASCII/RTU protocols. It can be used to allow

Ethernet masters to control serial slaves, or to allow serial masters to

control Ethernet slaves. Up to 16 TCP masters and 31 serial slaves can

be connected simultaneously.

Package Checklist

Before installing the MGate MB3180 Modbus gateway, verify that the

package contains the following items:

•1 MGate MB3180 Modbus gateway

•4 stick-on pads

•Document & Software CD

•Quick Installation Guide

•Product Warranty Statement

•Power adapter

Optional Accessory

•DK-35A: DIN-rail mounting kit (35 mm)

•Mini DB9F-to-TB Adaptor: DB9 female to terminal block adapter

•DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85

to 264 VAC input

•DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal

85 to 264 VAC input

•DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to

132 VAC/176 to 264 VAC input by switch

Notify your sales representative if any of the above items is missing or

damaged.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40

°C. If your application is out of this range, please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and

is rated 12

48 VDC; minimum current is 0.73 A). Moxa has power

adapters with wide temperature range (

-40 to 75 °C, -

40 to 167

F), the PWR-12150-(plug type)-SA-T series, for your reference.

- 3 -

Hardware Introduction

As shown in the following figures, the MGate MB3180 has one DB9 male

port for transmitting serial data.

Reset Button—The reset button is used to load factory defaults. Using

a pointed object such as a straightened paper clip to hold the reset

button down for five seconds. Release the reset button when the Ready

LED stops blinking in order to load the factory defaults.

- 4 -

LED Indicators—Three LED indicators are located on the top panel:

Name

Color

Function

Ready

Red

Steady on:

Power is on and the unit is booting up

Blinking:

IP conflict exists, or DHCP or BOOTP

server is not responding properly

Green Steady on: Power is on and the unit is functioning

normally

Blinking:

Unit has been found by the Location

command in MGate Manager

Off

Power is off or power error condition exists

Ethernet

Orange

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected or has a short

Orange

Unit is receiving data from device.

Green

Unit is transmitting data to device.

Off

No data is being exchanged with device.

Hardware Installation Procedure

STEP 1:

After unpacking the MGate MB3180, connect the power

adaptor

STEP 2:

Use a standard straight-through Ethernet cable to connect the

MGate

MB3180 to a network hub or switch. Use a cross-over

Ethernet cable if you are connecting the gateway directly to a

STEP 3:

Connect your device to the MGate MB3180

’s serial port.

STEP 4:

Place or mount the MGate MB3180. The unit may be placed

on a horizonta

l serface such as a desktop, mounted on a DIN

rail, or mounted on the wall.

Wall Mounting

DIN-rail Mounting

- 5 -

Adjustable Pull High/Low Resistors for the RS-485 Port

In some critical RS-485 environments, you may need to add

termination resistors to prevent the reflection of serial signals. When

using termination resistors, it is important to set the pull high/low

resistors correctly so that the electrical signal is not corrupted. Jumpers

JP3 and JP4 are used to set the pull high/low resistor values for the

serial port. To Set the pull high/low resistors to 150 KΩ, which is the

factory default setting, leave the two jumpers open. To set the pull

high/low resistors to 1 KΩ, use the jumper caps to short the two

jumpers.

MGate MB3180 Jumpers

- 6 -

Software Installation

To install MGate Manager, insert the MGate Documentation and

Software CD into your PC's CD-ROM drive, and then run the following

setup program to begin the installation process from the “Software”

directory:

MGM_Setup_[Version]_Build_[DateTime].exe

The filename of the latest version may have the following format:

MGM_Setup_Verx.x.x_Build_xxxxxxxx.exe.

For detailed information about MGate Manager, refer to the MGate

MB3000 User's Manual, which can be found in the “Document”

directory.

The MGate MB3180 also supports login via a web browser.

Default IP address: 192.168.127.254

Default account: admin

Default password: moxa

Pin Assignments

Ethernet Port (RJ45)

Signals

Tx+

Tx-

Rx+

Rx-

Serial Port (Male DB9)

Pin RS-232

RS-422/485

(4-Wire)

RS-485 (2-

Wire)

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Environmental Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

200 mA @ 12 VDC, 60 mA @ 48 VDC

Operating Temperature

0 to 60°C (32 to 140°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Dimensions

With ears:

Without ears:

22 x 75 x 80 mm (0.87 x 2.95 x 3.15 inch)

22 x 52 x 80 mm (0.87 x 2.05 x 3.15 inch)

Surge Protection

15 KV ESD for serial port

Magnetic Isolation

1.5 KV for Ethernet

- 7 -

Power Line Protection

4 KV burst (EFT), EN61000-4-4

2 KV surge, EN61000-4-5

Regulatory Approvals

FCC Class A, CE Class A, UL , CUL, TUV

Autres manuels pour MGate MB3180

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies Mgate MB3660 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5122 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies SMG-6100 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3480 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3270I Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Manuel utilisateur

Moxa Technologies

Moxa Technologies 4101I-MB-PBS-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5103 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5108 series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN-T Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies Mgate MB3660 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3270 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate EIP3000 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur