Moxa Technologies Mgate MB3660 Manuel utilisateur

– 1 – – 2 – – 3 –

P/N: 1802036600010

*1802036600010*

MGate MB3660 Series

Quick Installation Guide

First Edition, August 2015

Overview

The MGate MB3660 (MB3660-8 and MB3660-16) series gateways

are 8 and 16-port redundant Modbus gateways that convert

between the Modbus TCP and Modbus RTU/ASCII protocols. The

gateways come with built-in dual AC or DC power inputs for power

redundancy, and have dual Ethernet ports (with different IPs) for

network redundancy. The dual Ethernet ports can use the same IP

address for cable redundancy.

The MGate MB3660 series gateways provide not only

serial-to-Ethernet communication, but also

serial(Master)-to-serial(Slave) communication, and can be

accessed by up to 256 TCP master/client devices, or connected to

128 TCP slave/server devices.

Each serial port can be configured individually for Modbus RTU or

Modbus ASCII operation and for different baudrates, allowing both

types of networks to be integrated with Modbus TCP through one

Modbus gateway.

Package Checklist

Before installing the MGate MB3660 series gateway, verify that the

package contains the following items:

•1 MGate MB3660-8 or MB3660-16 gateway

•1 RJ45-to-DB9 female serial cable for console setting

•2 L-shaped brackets for wall mounting

•2 AC power cords (for AC models)

•Documentation and software CD

•Quick installation guide

•Product warranty statement

Optional Accessories

•Mini DB9F-to-TB Adapter: DB9 female to terminal block

adapter for RS-422/485 applications

•CBL-RJ45M9-150: 8-pin RJ45 to DB9 male cable, 150 cm

•CBL-RJ45F9-150: 8-pin RJ45 to DB9 female cable, 150 cm

Notify your sales representative if any of the above items are

missing or damaged.

Hardware Introduction

As shown in the following figures, the MGate MB3660-8 has 8 DB9

ports for transmitting serial data, and the MGate MB3660-16 has

16 DB9 ports for transmitting serial data. The MGate MB3660I

series gateways provide 2 kV serial port isolation protection.

AC Models

DC Models

Reset Button— Press the Reset button continuously for 5 sec to

load factory defaults

The reset button is used to load factory defaults. Hold the reset

button down for five seconds using a pointed object such as a

straightened paper clip. Release the reset button when the Ready

LED stops blinking.

LED Indicators

Name

Color

Function

PWR 1,

PWR 2

Red

Power is being supplied to the power input

Off

Power cable is not connected

Ready

Red

Steady on: Power is on and the unit is booting

Blinking: IP conflict, DHCP, or BOOTP server

did not respond properly, or a relay output

occurred

Green

Steady on: Power is on and unit is functioning

normally

Blinking: Unit is responding to the locate

function

Off

Power is off, or power error condition exists

Tx (1-16)

Green

Serial port is transmitting data

Rx (1-16)

Amber

Serial port is receiving data

LAN 1,

LAN 2

Green

Indicates 100 Mbps Ethernet connection

Amber

Indicates 10 Mbps Ethernet connection

Off

Ethernet cable is disconnected

Hardware Installation Procedure

STEP 1:

After unpacking the unit, connect the power supply to the

unit.

STEP 2:

Use an Ethernet cable to connect the unit to the network.

STEP 3:

Connect your device to the desired port on the unit.

STEP 4:

Place or mount the unit. The unit may be placed on a

horizontal surface such as a desktop, or mounted on the

wall.

Wall or Cabinet Mounting

Two metal plates are provided for mounting the

unit on a wall or inside a cabinet. Attach the

plates to the unit

’

s rear panel with screws. With

the plates attached, use screws to mount the unit

on a wall.

For each screw, th

e head should be 6.0 mm or

less in diameter, and the shaft should be 3.5 mm

or less in diameter.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Termination Resistor and Adjustable Pull High/Low

Resistors

In some critical environments, you may need to add termination

resistors to prevent the reflection of serial signals. When using

termination resistors, it is important to set the pull high/low

resistors correctly so that the electrical signal is not corrupted. The

MGate MB3660 uses DIP switches to set the pull high/low resistor

values for each serial port. To expose the DIP switches located on

the back of the PCB, first remove the screws holding the DIP switch

cover in place, and then remove the cover. The sequence from

right to left is port 1 to port 16.

To add a 120 Ω termination resistor, set switch 3 on the port's

assigned DIP switch to ON; set switch 3 to OFF (the default setting)

to disable the termination resistor.

To set the pull high/low resistors to 150 KΩ, set switches 1

and 2 on the port's assigned DIP switch to OFF. This is the default

setting.

To set the pull high/low resistors to 1 KΩ, set switches 1 and

2 on the port's assigned DIP switch to ON.

Pull High/low Resistors for the RS-485 Port

Default

Pull High

Pull Low

Terminator

1 KΩ

120 Ω

OFF

150 KΩ

---

Software Installation Information

To configure your MGate MB3660, connect the gateway’s Ethernet

port directly to your computer’s Ethernet port and then log in from

a web browser. The default IP addresses of LAN1 and LAN2 are

192.168.127.254 and 192.168.126.254, respectively. The MGate

supports two types of accounts: admin and user. The admin

account can modify all settings, whereas the user account can

only view settings. The default password for the admin account is

“moxa”.

If you forget the modified IP address of the gateway or cannot log

in to the gateway via a web browser for any reason, you can access

the gateway via a direct Ethernet cable connection using the

Device search utility to search for the gateway.

To install Device Search Utility (DSU), insert the MGate

Documentation and Software CD into your PC’s CD-ROM drive,

and then run the following setup program to begin the installation

process from the “Software” directory:

dsu_setup_[Version]_Build_[DateTime].exe

The filename of the latest version may have the following format:

dsu_setup_Verx.x.x_Build_xxxxxxxx.exe.

For detailed information about DSU, refer to the MGate MB3660

User's Manual, which can be found in the “Document” directory.

Pin Assignments

RJ45 (LAN, Console)

Pin LAN

Console

(RS-232)

Tx+

DSR

Tx-

RTS

Rx+

GND

–

TxD

–

RxD

Rx-

DCD

–

CTS

–

DTR

DB9 Male (RS-232/422/485)

Pin RS-232

RS-422/

RS-485-4W

RS-485-2W

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Relay Output

N.O.

Common

N.C.

Specifications

Power Input

Dual 20 to 60 VDC (for DC models);

or dual 100 to 240 VAC,

47 to 63 Hz (for AC models)

Power Consumption

MGate MB3660-8-2AC

MGate MB3660-8-2DC

MGate MB3660I-8-2AC

MGate MB3660-16-2AC

MGate MB3660-16-2DC

144mA/110V, 101mA/220V

312mA/24V, 156mA/48V

244mA/110V, 159mA/220V

178mA/110V,120mA/220V

390mA/24V, 195mA/48V

Operating Temperature

0 to 60°C (32 to 140°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Dimensions (W x D x H)

440 x 197.5 x 45.5 mm

(17.32 x 7.78 x 1.79 in)

Magnetic Isolation

1.5 kV for Ethernet,

2 kV for serial port (for I models)

Regulatory Approvals

FCC Class A, CE Class A, UL 60950-1

Fault Relay Circuit

3-pin circuit with current carrying

capacity of 2 A @ 30 VDC

Autres manuels pour Mgate MB3660

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies 6110 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5108 series Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3111 Manuel utilisateur

Moxa Technologies

Moxa Technologies CCG-1500 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5122 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies AIG-500 Series Instructions d'utilisation

Moxa Technologies

Moxa Technologies MGate MB3170I Manuel utilisateur

Moxa Technologies

Moxa Technologies MGATE EIP3000 DF1 Manuel utilisateur

Moxa Technologies

Moxa Technologies AIG-100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort Z3150 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3110 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5121 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5109 Manuel utilisateur

Moxa Technologies

Moxa Technologies MRC-1002 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3180 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort Z3150 Manuel utilisateur

Moxa Technologies

Moxa Technologies AIG-100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5109 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur