Huawei V100R001C00 Manuel utilisateur

HUAWEI Micro DC V100R001C00

Quick Installation Guide

Issue: 01

BOM: 31505829

Release Date: 2013-03-06

This document helps the customer service personnel quickly install the Micro data center (DC). For details, see the product

document CD-ROM delivered with the product.

Required Tools

Installation Process

Devices delivered to customers consist of typical configuration suite and extension components. The installation of extension

components varies with the number of terminals to be supported, while the installation of the typical configuration suite remains

unchanged. The Micro DC applies to scenarios in which 150, 300, and 600 terminals are supported.

If customers require more than 1 hour backup power, install a battery cabinet.

Cabinet installation process for 150 terminals Cabinet installation process for 300 and 600 terminals

Checking Quantities and Types of Goods

Checking Quantities and Types of Goods > Inspecting Goods

Inspecting the battery pack Inspecting the monitoring suite outside the cabinet

If there are other components that require inspections, unpack and inspect them.

Number of

terminals

Device Type Device Quantity Remarks

Micro DC All-in-One cabinet 1

1 AR2220, 1 S5752, 3 S3752s, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1

fan assembly, and 1 monitoring system (including 1 ECC, 1

temperature and humidity sensor, 1 water leakage sensor, 2 door

status sensors, and 1 smoke sensor)

Basic/Storage/Computing RH2288 1

Battery pack 3

Monitoring suite outside the

cabinet (including the sensor

mounting arm, smoke sensor, and

IP camera)

AP6010DN 2

Micro DC All-in-One cabinet 1

1AR2220, 1 S5752, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1 fan assembly, and 1

monitoring system (including 1 ECC, 1 temperature and humidity sensor, 1

water leakage sensor, 2 door status sensors, and 1 smoke sensor)

Basic/Storage/Computing RH2288 1

Battery pack 3

Monitoring suite outside the

cabinet (including the sensor

mounting arm, smoke sensor, and

IP camera)

AP6010DN 3

Network distribution cabinet 1

S3752 (office edition) 8

Micro DC All-in-One cabinet 1

1AR2240, 1 S5752, 1 PDB, 1 UPS (6 kVA), 1 PDU, 1 fan assembly, and 1

monitoring system (including 1 ECC, 1 temperature and humidity sensor, 1

water leakage sensor, 2 door status sensors, and 1 smoke sensor)

Basic/Storage/Computing RH2288 1

Battery pack 3

Monitoring suite outside the

cabinet (including the sensor

mounting arm, smoke sensor, and

IP camera)

AP6010DN 4

Basic RH2288 1

Network distribution cabinet 1

S3752 (office edition) 12

600

Typical

configuratio

n suite

Extension

components

150

Typical

configuratio

n suite

Extension

components

300

Typical

configuratio

n suite

Extension

components

Use a screwdriver to

loosen the wooden

screw.

Installation Planning

For 150 terminals

All-in-One cabinet

Installation Planning

For 300 terminals

All-in-One cabinet

42 1U 1U 42

41 1U 1U 41

40 1U 1U 40

39 1U 1U 39

38 1U 1U 38

37 1U 1U 37

36 1U 1U 36

35 1U 1U 35

34 1U 1U 34

33 1U 1U 33

32 1U 1U 32

31 1U 1U 31

30 1U 1U 30

29 1U 1U 29

28 1U 1U 28

27 1U 1U 27

26 1U 1U 26

25 1U 1U 25

24 1U 1U 24

23 1U 1U 23

22 1U 1U 22

21 1U 1U 21

20 1U 1U 20

19 1U 1U 19

18 1U 1U 18

17 1U 1U 17

16 1U 1U 16

15 1U 1U 15

14 1U 1U 14

13 1U 1U 13

12 1U 1U 12

11 1U 1U 11

10 1U 1U 10

91U 1U 9

81U 1U 8

71U 1U 7

61U 1U 6

51U 1U 5

41U 1U 4

31U 1U 3

21U 1U 2

11U 1U 1

Network distribution

cabinet (front view)

S3752 switch

Network distribution

cabinet (front view)

Installation Planning

For 600 terminals

All-in-One cabinet

42 1U 1U 42

41 1U 1U 41

40 1U 1U 40

39 1U 1U 39

38 1U 1U 38

37 1U 1U 37

36 1U 1U 36

35 1U 1U 35

34 1U 1U 34

33 1U 1U 33

32 1U 1U 32

31 1U 1U 31

30 1U 1U 30

29 1U 1U 29

28 1U 1U 28

27 1U 1U 27

26 1U 1U 26

25 1U 1U 25

24 1U 1U 24

23 1U 1U 23

22 1U 1U 22

21 1U 1U 21

20 1U 1U 20

19 1U 1U 19

18 1U 1U 18

17 1U 1U 17

16 1U 1U 16

15 1U 1U 15

14 1U 1U 14

13 1U 1U 13

12 1U 1U 12

11 1U 1U 11

10 1U 1U 10

91U 1U 9

81U 1U 8

71U 1U 7

61U 1U 6

51U 1U 5

41U 1U 4

31U 1U 3

21U 1U 2

11U 1U 1

Network distribution

cabinet (front view)

S3752 switch

Network distribution

cabinet (front view)

Labeling for Network Devices

Labeling

Labeling for Power Cables

On the PDU end

On the device end

If there are multiple power modules that are not

numbered in a device, number them in an

ascending order from the top down and from left

to right.

Only one power distribution unit (PDU) is

preinstalled in the All-in-One cabinet and

numbered PDU1.

More PDUs are numbered in an ascending

order from outside to inside and from left to

right.

The rack is divided into 42 U (1 U = 1.75 in.),

numbering from 1 to 42 from the bottom up.

For the network device occupying more than 1 U,

the label records the smallest height number. For

example, if a 2 U network device occupies 34 U

and 35 U, "34U" will be present in the label.

Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration

Suite > Installing the All-in-One cabinet (for All Scenarios)

1 2

Remove reinforcing brackets from

the cabinet.

Install the ground cable.

Prepare the power cable connectors.

Connect power cables.

Combine and level cabinets.

There is one reinforcing

bracket at the height of 22 U

(38.5 in.) in the front and rear

of the cabinet. Before

removing the front reinforcing

bracket, remove the filler

panels at the height of 23 U to

25 U (40.25 in. to 43.75 in.).

Mains inlet port

Power cable

Ground cable

Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite

> Installing the All-in-One Cabinet > (Optional) Installing the SIM Card (for All Scenarios)

Remove the General Packet Radio Service

(GPRS) module from the ECC.

Install the subscriber identity module (SIM)

card.

SIM card slot

GPRS module

ECC

Lead the cable from the GPRS antenna into the cabinet

through the cable hole on the top of the cabinet. Route the

cable along the external side of the mounting bar on the

right of the rear of the cabinet to the ECC at the cabinet

bottom. Then bind the cable to the cable tray under the ECC.

Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration Suite

> Installing the All-in-One cabinet > Installing the GPRS Antenna (for All Scenarios)

Loosen screws beside the GPRS module

and pull out the module.

Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration

Suite > (Optional) Installing Battery Packs (for All Scenarios)

If customers require more than 1 hour backup power,

install a battery cabinet or battery packs.

Before connecting battery packs using power

cables, loosen screws beside the protection cover

for the wiring terminals and remove the

protection cover.

Install the protection cover after connecting

battery packs using power cables.

Positions for installing Battery Packs

Checking Quantities and Types of Goods > Inspecting Goods > Installing the Typical Configuration

Suite > Installing Servers (for All Scenarios)

Only one RH2288 is provided by default for Micro DC typical configurations for 150, 300, and 600 terminals.

The All-in-One cabinet reserves space for another two servers. Customers can install two more servers if one RH2288 cannot meet

requirements.

If three RH2288 servers are installed, number them RH2288_1, RH2288_2, and RH2288_3.

Install the servers in the right place.

No ground cable is required, because the RH2288 is

configured with AC power modules.

Server installation

Network cable connection for a server Network cable connection for two servers

Positions for installing servers

Power ground cable connection

Table des matières

Autres manuels Huawei Unité de contrôle

Huawei

Huawei ME906V Manuel utilisateur

Huawei

Huawei VP9660 Manuel utilisateur

Huawei

Huawei UPS5000-H-400K-NT Manuel utilisateur

Huawei

Huawei MU709Gs-8 Manuel utilisateur

Huawei

Huawei SmartAX MA5811S-AE08 Manuel utilisateur

Huawei

Huawei ME909 Series Instructions d'installation

Huawei

Huawei ME906A Instructions de montage

Huawei

Huawei PDC V2.0 Manuel utilisateur

Huawei

Huawei SmartLogger2000 series Manuel utilisateur

Huawei

Huawei MU736 HSPA+ M.2 Guide de l'utilisateur

Huawei

Huawei ME309-562 Instructions d'installation

Huawei

Huawei G530 V2 Guide de référence rapide

Huawei

Huawei SmartModule1000A01 Manuel utilisateur

Huawei

Huawei SmartAX MA5606T Caractéristiques techniques

Huawei

Huawei ME909s Series Instructions d'installation

Huawei

Huawei MG323 Instructions d'installation

Huawei

Huawei CX116 Guide de référence rapide

Huawei

Huawei ME906E Manuel utilisateur

Huawei

Huawei RTN 380H Manuel utilisateur

Huawei

Huawei MU509 Series Instructions d'installation

Huawei

Huawei ME909U-523D Manuel utilisateur

Huawei

Huawei ME909u-523 Guide de l'utilisateur

Huawei

Huawei ME909u-521 Instructions d'installation

Huawei

Huawei ME906s LTE M.2 Instructions d'installation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur