Huawei ME906V Manuel utilisateur

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei

Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce,

distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,

or sublicense the said software, unless such restrictions are prohibited by applicable laws or

such actions are approved by respective copyright holders under licenses.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software

installed, capacities and settings of local network, and may not be activated or may be

limited by local network operators or network service providers, thus the descriptions herein

may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or

specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY

APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI

TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR

ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will

obtain all necessary governmental permits and licenses in order to export, re-export or

import the product mentioned in this manual including the software and technical data

therein.

Contents

Getting to Know the ME906V.........................................................................................................................1

Assembly................................................................................................................................................................4

Installation Guide................................................................................................................................................4

Thank you for purchasing HUAWEI ME906V LTE M.2 Module

(hereinafter referred to as the ME906V)

Note:

This manual briefly describes the preparation, the process for PCB Design, Assembly

and safety precautions.

It is recommended to read the manual before using the ME906V.

Getting to Know the ME906V

The ME906V module is 75 pin Gold Finger with a dimension of 42 mm × 30 mm ×

2.3mm. It is applied to the user interface board, and can be used as a wireless terminal

in a network environment.

Antenna interface

It is used to connect and fix an antenna.

Fixing hole

A screw, metal fastener, and nut are used to fix an ME906V module on a development board

through this fixing hole.

Gold Finger

It is connected to the M.2 connector on the development board.

Note:

In certain cases, your development board may be disassembled only by the

professionals.

Before you install the ME906V onto the development board, consult the development

board manufacturer or read the user manual of the development board.

Assembly

Through the M.2 connector

Installation Guide

Installing and Using an ME906V Module

1. Connect an antenna connector to the antenna interface of an ME906V.

Note:

Insert the antenna connectors vertically into the antenna interfaces of the ME906V.

Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless

performance of the ME906V be reduced or the ME906V cannot work normally.

Ensure that the antenna is placed normally.

2. Fasten the the gold finger in the ME906V module to a M.2 connector of a development

board to fix the ME906V module on the development board.

3. Place a metal fastener between the ME906V module and the development board. Put a

screw through the fixing hole of the ME906V, metal fastener, and fixing hole of the

development board in sequence. Then fasten a nut on the screw.

4. Insert a UIM card into the UIM card socket in the development board.

Removing an ME906V Module from a Development Board

1. Remove the UIM card from the UIM card socket.

2. Power off

3. Remove the screw on the ME906V module.

4. Remove the ME906V module from the development board.

5. Remove the antenna from the ME906V module.

Table des matières

Autres manuels Huawei Unité de contrôle

Huawei

Huawei MU609 Guide de l'utilisateur

Huawei

Huawei ME906E Instructions d'installation

Huawei

Huawei VP9660 Manuel utilisateur

Huawei

Huawei APM30H Manuel utilisateur

Huawei

Huawei UPS5000-H-1200K-NT Manuel utilisateur

Huawei

Huawei SmartAX MA5612 Manuel d'utilisation

Huawei

Huawei ME909 Series Instructions d'installation

Huawei

Huawei UPS5000-E Series Manuel utilisateur

Huawei

Huawei ME909u-521 Instructions d'installation

Huawei

Huawei V100R001C00 Manuel utilisateur

Huawei

Huawei ME919Bs-567bN Manuel utilisateur

Huawei

Huawei SmartLogger2000 series Manuel utilisateur

Huawei

Huawei MC509 Instructions d'installation

Huawei

Huawei SmartLogger2000-10-C-JP Manuel utilisateur

Huawei

Huawei UPS5000-H-400K-NT Manuel utilisateur

Huawei

Huawei MU609T Manuel utilisateur

Huawei

Huawei MU709s-2 Instructions d'installation

Huawei

Huawei ICD OPS D Series Manuel utilisateur

Huawei

Huawei CX320 Manuel utilisateur

Huawei

Huawei ME909u-523 Instructions d'installation

Huawei

Huawei ME909 Series Instructions d'installation

Huawei

Huawei PDC V2.0 Manuel utilisateur

Huawei

Huawei ME909u-523 Instructions d'installation

Huawei

Huawei MU609 Instructions d'installation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur