Huawei SmartModule1000A01 Manuel utilisateur
HUAWEI TECHNOLOGIES CO., LTD.
Issue: 04
Part Number: 31500BWV
Date: 2020-05-11
SmartModule1000A01
Quick Guide
1
1Overview
Copyright © Huawei Technologies Co., Ltd. 2020.
All rights reserved.
•The information in this document is subject to change due to version upgrade or
other reasons. Every effort has been made in the preparation of this document
to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind,
express or implied. You can download this document by scanning the QR code.
•Operation personnel should understand the composition and working principles
of the grid-tied PV power system and local regulations.
(1) LED indicators (RUN, ALM)
(2) Mounting ear
(3) Guide rail clamp
(4) COM ports (COM1, COM2, COM3)
(5) DI ports (DI)
(6) 12 V
output power port (12V/GND)
(7) AI ports (AI)
(8) Potential transformer (PT) ports (PT1, PT2)
(9) Protective ground point
(10) 12 V
input power port (DC IN 12V, 1A)
(11) 24 V
input power port (DC IN 24V, 0.8A)
(12) GE ports (GE1, GE2, GE3, GE4)
(13) RST button (RST)
•Before installing the device, closely read the user manual to get familiar with product
information and safety precautions. Huawei shall not be liable for any consequence caused by
violation of the storage, installation, and operation regulations specified in this document and
the user manual.
•Use insulated tools when installing the device. For personal safety, wear proper personal
protective equipment (PPE).
2
2Installation Requirements
3Device Installation
Dimensions Space
Wall-Mounted Installation
•Install the SmartLogger and SmartModule on a flat and secure interior wall.
•When wall-mounting the SmartLogger and SmartModule, ensure that the cable connection area
faces downward for ease of cable connection and maintenance.
•You are advised to use the delivered tapping screws and expansion tubes.
1. Connect the SmartLogger to the SmartModule using a connecting plate.
If the SmartLogger
and SmartModule
have been
combined before
delivery, skip this
step.
3
2. Install the SmartLogger and SmartModule.
Guide Rail-Mounted Installation (Stand-alone)
•Before installation, prepare a standard 35 mm guide rail and secure it.
•The recommended effective length of the guide rail is 360 mm or greater.
•Ensure that the SIM card slot on the SmartLogger is not blocked.
4
Guide Rail-Mounted Installation (Combined)
•Before installation, prepare a standard 35 mm guide rail and secure it.
•The recommended effective length of the guide rail is 360 mm or greater.
•Ensure that the SIM card slot on the SmartLogger is not blocked.
1. Connect the SmartLogger to the SmartModule using a connecting plate.
2. Install the SmartLogger and SmartModule.
If the SmartLogger and
SmartModule have been
combined before delivery,
you only need to remove
the mounting ears and
guide rail clamps in the
middle. You do not need
to use a connecting plate
to connect the
SmartLogger and
SmartModule.
5
4Electrical Connections
Preparing Cables
4.1
Type
Recommended Specifications
Protective
earthing (PE) cable
Outdoor copper cable with a cross
-sectional area of 4–6 mm2
or
12
–10 AWG
Ethernet
cable
Delivered
with the SmartModule
12 V
input power cable
Delivered
with the SmartModule
RS485 communications cable
Two
-core or multi-core cable with a cross-sectional area of 0.2–
2.5 mm
2or 24–14 AWG
DI signal cable
Two
-core or multi-core cable with a cross-sectional area of 0.2–
1.5 mm
2or 24–16 AWG
Output p
ower cable
AI signal cable
PT signal cable
For details about the cables and cable connection operations,
see the documents
delivered with the PT100/PT1000.
(Optional) 24 V
input power cable
Two
-core cable with a cross-sectional area of 0.2–1.5 mm2or
24
–16 AWG
•Connect cables in accordance with the installation laws and regulations of the country or region
where the project is located.
•Before connecting cables to ports, leave enough slack to reduce the tension on the cables and
prevent poor cable connections.
Connecting the PE Cable
4.2
•To enhance the
corrosion resistance of
the ground terminal,
you are advised to
apply silica gel or paint
on it after connecting
the ground cable.
•If the SmartLogger is
connected to the
SmartModule over a
connecting plate,
connect a PE cable to
the ground point of the
SmartLogger or
SmartModule based on
site requirements.
6
Connecting the Ethernet Cable
4.3
•The SmartModule can be connected to the SmartLogger and a PC over the GE port.
•Connect the LAN port on the SmartLogger to one GE port on the SmartModule using an
Ethernet cable.
•If the delivered network cable is too short, you are advised to prepare a network cable of Cat 5e
or higher specifications and shielded RJ45 connectors. It is recommended that the cable length
be less than or equal to 100 m. When crimping the network cable, ensure that the shielding
layer of the cable is securely connected to the metal shell of the RJ45 connectors.
(1) White
-
and-
orange
(2) Orange
(3) White
-
and-
green
(4) Blue
(5) White
-
and-
blue
(6) Green
(7) White
-
and-
brown
(8) Brown
Connecting the 12 V Input Power Cable
4.4
The SmartLogger connects to the power supply over the 12 V input power port, and the 24 V input
power port of the SmartLogger functions as the 12 V output power port to supply power to the
SmartModule.
7
Connecting the RS485 Communications Cable
4.5
Port
Identifier
Description
COM1, COM2, COM3
+
RS485A, RS485 differential signal+
–
RS485B, RS485 differential signal
–
•It is recommended that the RS485 communication distance be less than or equal to 1000 m.
•The SmartModule can connect to RS485 communications devices, such as a solar inverter, an
environmental monitoring instrument (EMI), and a power meter over the COM port.
•Ensure that the RS485+ and RS485–terminals are respectively connected to the COM+ and
COM–ports on the SmartModule.
Cascading Connection
•You are advised to connect fewer than 30 devices to each RS485 route.
•The baud rate, communications protocol, and parity mode of all devices on the RS485
cascading link must be the same as those of the COM ports on the SmartModule.
8
Connecting the DI Signal Cable
4.6
•The SmartModule can receive DI signals such as remote power grid scheduling commands and
alarms over DI ports. It can only receive passive dry contact signals.
•It is recommended that the signal transmission distance be less than or equal to 10 m.
Port
Description
DI1
Can receive passive
dry contact signals.
DI2
DI3
DI4
Connecting the Output Power Cable
4.7
•In the grid connection with limited power or audible and visual alarm scenarios, the
SmartModule can drive the coils of the intermediate relay over the 12 V output power port.
•It is recommended that the transmission distance be less than or equal to 10 m.
Intermediate relay
9
Connecting the AI Signal Cable
4.8
•The SmartModule can receive AI signals from the EMIs over the AI ports.
•It is recommended that the transmission distance be less than or equal to 10 m.
•AI ports 1, 2, 3, and 4 are for AI+ signals, and the GND port is for AI–signals.
Port
Description
AI1
Supports 0
–10 V
input voltage.
AI2
Supports 4
–
20 mA or
0
–20 mA input
current.
AI3
AI4
Connecting the PT Signal Cable
4.9
The SmartModule provides two PT ports, which can be used to connect to three-wire or two-wire
PT100/PT1000 temperature sensors.
Three-Wire System
PT100/PT1000 temperature sensor
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Huawei Unité de contrôle
Huawei
Huawei SmartLogger2000 series Manuel utilisateur
Huawei
Huawei MU609T Manuel utilisateur
Huawei
Huawei ME906s Manuel utilisateur
Huawei
Huawei EM770U Manuel utilisateur
Huawei
Huawei SmartAX MA5675 Manuel utilisateur
Huawei
Huawei EM770V Manuel utilisateur
Huawei
Huawei MC509 Instructions d'installation
Huawei
Huawei RTN 380H Manuel utilisateur
Huawei
Huawei MU736 HSPA+ M.2 Instructions d'installation
Huawei
Huawei SmartAX MA5600T Mode d’emploi
Huawei
Huawei MU709s-2 Instructions d'installation
Huawei
Huawei UPS5000-E-400K-SMS Manuel utilisateur
Huawei
Huawei SmartLi-ESM-24020P1 Manuel utilisateur
Huawei
Huawei MU609 Guide de l'utilisateur
Huawei
Huawei ME909s-120 Instructions d'installation
Huawei
Huawei MG301 Instructions d'installation
Huawei
Huawei MU609 Instructions d'installation
Huawei
Huawei PDC V2.0 Manuel utilisateur
Huawei
Huawei ME906E Manuel utilisateur
Huawei
Huawei MG323 Manuel utilisateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
