Huawei MU203 Manuel utilisateur

Table des matières

Autres manuels Huawei Unité de contrôle

Huawei

Huawei MG323 Instructions d'installation

Huawei

Huawei MU709s-2 Instructions d'installation

Huawei

Huawei ME309-562 Instructions d'installation

Huawei

Huawei ME909u-523 Instructions d'installation

Huawei

Huawei EM770 Manuel utilisateur

Huawei

Huawei EM660 Manuel utilisateur

Huawei

Huawei ME906E Instructions d'installation

Huawei

Huawei UPS5000-E Series Manuel utilisateur

Huawei

Huawei VP9660 Manuel utilisateur

Huawei

Huawei MU709Gs-8 Manuel utilisateur

Huawei

Huawei MU509 Series Manuel utilisateur

Huawei

Huawei ME906A Instructions de montage

Huawei

Huawei MU736 HSPA+ M.2 Guide de l'utilisateur

Huawei

Huawei UPS5000-E Series Manuel utilisateur

Huawei

Huawei CX116 Guide de référence rapide

Huawei

Huawei MU509 Series Manuel utilisateur

Huawei

Huawei ME909s-120 Instructions d'installation

Huawei

Huawei CX320 Manuel utilisateur

Huawei

Huawei UPS5000-E Series Manuel utilisateur

Huawei

Huawei EM770S Manuel utilisateur

Huawei

Huawei MU609 Guide de l'utilisateur

Huawei

Huawei BBU3900 Mode d’emploi

Huawei

Huawei ME909s Series Instructions d'installation

Huawei

Huawei UPS5000-E-200K-SM Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Copyright © 2009 Huawei Technologies Co., Ltd.

All Rights Reserved

No part of this document may be reproduced or transmitted in any form or by any

means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co.,

Ltd.

All other trademarks and trade names mentioned in this document are the

property of their respective holders.

Notice

The information in this document is subject to change without notice. Every effort

has been made in the preparation of this document to ensure accuracy of the

contents, but all statements, information, and recommendations in this document

do not constitute the warranty of any kind, express or implied.

i

Table of Contents

Getting to Know the MU203..................................................................... 1

Preparing the MU203.............................................................................. 4

Installation Guide .................................................................................. 5

Safety Information................................................................................. 9

1

Thank you for purchasing Huawei MU203 Wireless

Module.

Note:

This manual briefly describes the preparation, the process for

installing/uninstalling, and safety precautions for using Huawei MU203

Wireless Module (hereinafter referred to as the MU203).

You are recommended to read the manual before using the MU203.

The signal strength and the transmission rate are affected by the actual

environment.

Getting to Know the MU203

The following figure shows the appearance of the MU203. The actual product may

differ.

2

2

3

2

1

2

nBTB Connector

It is used to connect to the interface of the PC.

oScrew holes

They are used to fix the MU203 on the main board of the PC with screws.

pAntenna interfaces

It is used to connect an antenna.

Requirements for the User Side

To use the MU203, the user must meet the following requirements:

3

60-pin Board to Board Connector interface.

Windows CE/Windows XP/Linux 2.6.18 or later versions

Display resolution: 800 × 600 or above.

The antenna gain：850M<4.28dBi，1900M<2.1dBi

4

Preparing the MU203

Locate the MU203 on the main board of the PC. Find the antenna.

If a USIM/SIM card is provided by your service provider, insert the USIM/SIM card

into the USIM/SIM card slot on the main board of the PC.

Note:

In certain cases, your PC may be disassembled only by the professionals.

Before you install the MU203 onto the main board of the PC, consult the PC

manufacturer or read the user manual of the PC.

5

Installation Guide

Installing the MU203 onto the Main Board of the PC

1. Locate the MU203 on the main board of the PC.

2. Insert the antenna into the antenna interface of the MU203.

6

3. Press downwards to fix the MU203 in the module slot.

Note:

Insert the antenna connectors vertically into the antenna interfaces of the

MU203.

Do not pinch the antenna cable or damage the connectors. Otherwise, the

wireless performance of the MU203 may be reduced or the MU203 cannot

work normally.

Ensure that the antenna cables are routed through the channel in the frame of

the PC and do not lay across the raised edges of the frame.

Removing the MU203 from the Main Board of the PC

1. Disconnect the antenna cables from the MU203. You can lift the connectors

with a small screwdriver.

7

2. Release the MU203 from the module slot. Then, lift up the MU203.

Installing the MU203 Software

A disk is provided in the MU203 packing box. The disk contains the management

program and the driver of the MU203.

1. Insert the disk into the disk drive of the PC.

2. Find the AutoRun.exe file under the disk path. Then double-click

AutoRun.exe to run the program.

3. Follow the prompts of the installation wizard.

4. After the program is installed, the shortcut icon of the management program

is displayed on the desktop.

Uninstalling the Management Program

1. Choose Start > Control Panel.

2. Find the management program, and click Add/Remove Program to

uninstall the management program.

8

Note:

It is recommended to restart the PC after the uninstallation to ensure that the

management program is completely uninstalled.