HP Smart Array 5300A Manuel utilisateur

Release Notes –

Smart Array 5300A Backplane RAID Controllers

Part Number: AV-RT16E-TE / 192268-003

Sixth Edition (April 2004)

These release notes provide supplemental and updated information for the Smart

Array 5300A RAID controller product not available elsewhere. Smart Array

5300A (SA5300A) controllers are modular in design and are shipped in one of two

product configurations for use in supported Alpha systems. The

3X–KZPDC–BE (SA5302A/128) is a two channel U3 SCSI controller with

128MB of installed cache. The 3X–KZPDC–DF controller (SA5304A/256)

provides four channels of SCSI device interconnect and includes 256MB of cache.

Note: Be sure to review the product documentation and to check the Smart Array

5300A product web site for updates before installing these controllers into your

Alpha system.

The Smart Array 5300A controller product home page is located at:

http://h18002.www1.hp.com/alphaserver/products/storage/sa5300a/

Hewlett-Packard Company

Hewlett-Packard Company makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing, performance, or

use of this material.

This document contains proprietary information, which is protected by copyright. No part

of this document may be photocopied, reproduced, or translated into another language

without the prior written consent of Hewlett-Packard. The information contained in this

document is subject to change without notice.

HP, the HP logo, HP Insight Manager, AlphaServer, StorageWorks, and TruCluster

Registered in U.S. Patent and Trademark Office. OpenVMS and Tru64 are trademarks of

HP Information Technologies Group, L.P. in the United States and other countries.

Compaq Computer Corporation is a wholly-owned subsidiary of Hewlett-Packard

Company.

UNIX is a trademark of The Open Group in the United States and other countries. All

other product names mentioned herein may be trademarks of their respective companies.

Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft

Corporation in the U.S. and/or other countries.

HP shall not be liable for technical or editorial errors or omissions contained herein. The

information in this document is provided "as is" without warranty of any kind and is

subject to change without notice.

Printed in the U.S.A.

Release Notes – Smart Array 5300A Backplane RAID Controllers

Sixth Edition (April 2004)

Part Number: AV-RT16E-TE / 192268-003

Table of Contents

Intended Audience 1

KZPDC Product Updates 1

KZPDC Product Components 1

Controller Firmware Support 1

Alpha System Firmware Support 2

Operating System Support 2

Tru64 UNIX Software Components 3

OpenVMS Software Components 4

Runtime Utility Support 5

Tru64 UNIX Utility Components 5

OpenVMS Utility Components 6

Web Browser Support 8

KZPDC Event Translation Support 8

Supported HP Alpha Systems 9

KZPDC Product Issues and Restrictions 10

Platform Specific Issues and Restrictions 10

DS20E System Issues 10

GS80, GS160 and GS320 System Issues 10

ES47, ES80 and GS1280 System Issues 11

Alpha System Firmware Issues and Restrictions 11

Tru64 UNIX Issues and Restrictions 12

OpenVMS Issues and Restrictions 12

Runtime Utility Issues and Restrictions 12

Firmware Issues and Restrictions 13

Storage Enclosure Issues and Restrictions 14

Hardware and Connection Details 15

iii

Intended Audience

This document is intended for customers who install, use, or troubleshoot the

KZPDC SmartArray 5300A controller product in Alpha systems. It describes

KZPDC product updates and known issues or restrictions when using the

controller within particular system configurations.

KZPDC Product Updates

This release announces several Smart Array 5300A product updates which are

documented more fully later in these notes. These updates include:

•New controller firmware, version 3.40, is available for download from the

Smart Array controller for Alpha systems home page.

•Updated versions of the Smart Array OpenVMS runtime utilities are available

which resolve prior incompatibilities between the version 3 OpenVMS

Management Agent kit and the Smart Array Configuration Utility.

•Full support up to platform controller limits is now provided in the OpenVMS

Smart Array runtime utilities for KZPDC installations on ES47, ES80, and

GS1280 systems.

•Introducing OpenVMS version 7.3-2 support for the KZPDC controller which

provides FastPath functionality for improved performance.

•New KZPDC Alpha system support for OpenVMS and Tru64 UNIX

installations on the GS80, GS160, and GS320 platform.

KZPDC Product Components

Controller Firmware Support

Smart Array 5300A controller firmware version 3.40 is available as an update for

the KZPDC controller. Note that the KZPDC option kit presently ships with

version 2.94 firmware.

Controller firmware v3.40 is a recommended update for KZPDC controller

installations on all supported Alpha system platforms under OpenVMS or Tru64

UNIX.

Release Notes – Smart Array 5300A Backplane RAID Controllers 1

The v3.40 firmware image may be obtained from the Smart Array 5300A product

web site or on the V6.6 Alpha Firmware CD in the OPTIONS subdirectory. Two

examples of the controller firmware update command syntax are presented below.

Both examples employ the Loadable Firmware Utility (LFU) function of the

Alpha SRM console.

The first example will update controller instance PYA0 with the v3.40 image after

booting the V6.6 Alpha Firmware CD in CD-ROM device DQA0 on any

supported Alpha system:

UPD> update pya0 -p iso9660:[OPTIONS]kzpdc340.sys/dqa0

The second example employs the firmware image available on the Smart Array

5300A web site and assumes that the update media is a floppy disk in device

DVA0. After unpacking the .zip archive of the v3.40 firmware image place the file

onto a MS-DOS (FAT) formatted floppy disk. Place the disk into your Alpha

system floppy drive and execute the following command after entering the LFU.

Note that it is required to specify the .bin file extension of the firmware image.

The example updates KZPDC controller instance PYC0.

UPD> update pyc0 -p fat:kzpdc340.bin/dva0

Alpha System Firmware Support

It is recommended that all Alpha system environments hosting the KZPDC

product be updated using SRM firmware from the V6.6 (or later) Alpha Firmware

CD release. The V6.6 release firmware for Alpha systems is downloadable from

the following locations:

http://www.itrc.hp.com

http://ftp.digital.com/pub/DEC/Alpha/firmware/

Operating System Support

Smart Array 5300A controllers may be configured for operation under Tru64

UNIX version 5.1A or version 5.1B. OpenVMS support is available in versions

7.3-1 and 7.3-2 of the operating system. The product may be employed either as

the system boot controller or as a data only array controller in all supported OS

environments. Installation requirements vary, however, depending on the system

environment under consideration when the SA5300A product is first installed.

2 Release Notes – Smart Array 5300A Backplane RAID Controllers

Consult the guidance provided below to determine what software components are

required for full support of the product in these two operating system

environments. Patches for OpenVMS and Tru64 UNIX customers may be

obtained from the following URLs:

http://www.itrc.hp.com/

ftp://ftp.itrc.hp.com/

The following software kits and patch updates are required for Smart Array 5300A

controller installations:

Tru64 UNIX Software Components

New Installations:

Customers creating new Tru64 UNIX installations that include the KZPDC

controller should follow the installation procedures detailed in the specified New

Hardware Delivery (NHD) kit.

• V5.1B Tru64 UNIX

-- Tru64 UNIX V5.1B base operating system kit

-- Tru64 UNIX NHD7 kit for V5.1A and V5.1B

NHD kit name:

NHD7.tar.gz

• V5.1A Tru64 UNIX

-- Tru64 UNIX V5.1A base operating system kit

-- Tru64 UNIX NHD7 kit for V5.1A and V5.1B

NHD kit image name:

NHD7.tar.gz

Existing Installations:

Users introducing the KZPDC controller into an existing V5.1A or V5.1B

installation should first update their environment with the indicated patch kit and

then install the hardware. Later versions of these patch kits may be substituted

when available. Boot genvmunix and follow standard procedures for creating a

customized kernel using doconfig(8).

• V5.1B Tru64 UNIX

Release Notes – Smart Array 5300A Backplane RAID Controllers 3

-- Tru64 UNIX V5.1B Patch Kit 3

Patch kit image name:

T64V51BB24AS0003-20030929.tar

• V5.1A Tru64 UNIX

-- Tru64 UNIX V5.1A Patch Kit 6

Patch kit image name:

T64V51AB24AS0006-20031031.tar

OpenVMS Software Components

• OpenVMS V7.3-2

Support for the KZPDC controller is present in the base OpenVMS V7.3-2

release. OpenVMS V7.3-2 introduces Fastpath support in the Smart Array

controller driver (PKRdriver). Consult the OpenVMS V7.3-2 Operating System

Release Notes and New Features documentation for more information.

-- OpenVMS V7.3-2 base operating system kit

-- There are no patch files presently required for use of the KZPDC product

under OpenVMS V7.3-2.

• OpenVMS V7.3-1

Support for the KZPDC controller is present in the base OpenVMS V7.3-1

release. Customers should ensure the following patch kits (or version successors)

are installed in the creation of new OpenVMS installations or as part of

maintaining an existing V7.3-1 installation:

-- OpenVMS V7.3-1 base operating system kit

-- VMS731_UPDATE–V0100

Patch kit image name:

DEC-AXPVMS-VMS731_UPDATE-V0100--4.PCSI

-- VMS731_FIBRE_SCSI–V0400

Patch kit image name:

DEC-AXPVMS-VMS731_FIBRE_SCSI-V0400--4.PCSI

-- VMS731_PTHREAD–V0200

Patch kit image name:

DEC-AXPVMS-VMS731_PTHREAD-V0200--4.PCSI

4 Release Notes – Smart Array 5300A Backplane RAID Controllers

Runtime Utility Support

Web based utilities are provided for monitoring and configuring the Smart Array

5300A controller and attached storage under OpenVMS and Tru64 UNIX. The

monitoring function is made available as part of the HP Insight Management (IM)

Agents kit for the user’s selected OS environment.

Online controller array configuration and maintenance functions are provided via

the SA5300A Array Configuration Utility (ACU-XE). The ACU-XE utility is

installed separately from HP Insight Management Agents kit but requires for

operation the facilities provided by the Management Agent kit.

Tru64 UNIX Utility Components

HP Insight Management Agents for Tru64 UNIX

•The Tru64 UNIX Insight Management Agent kit version v3.2 provides

KZPDC utility support for V5.1A and V5.1B Tru64 UNIX installations on all

Alpha system platforms. This kit supersedes the Management Agent kit found

on the software media CD-ROM supplied with the KZPDC controller.

Customers are advised to update to the v3.2 kit if they have not already done

so.

The v3.2 Tru64 UNIX Management Agent kit and associated patches can be

downloaded from the following location:

http://h30097.www3.hp.com/cma/

Users are advised to check this site periodically for patches and updates to the

Tru64 UNIX Insight Management Agents kit.

Array Configuration Utility XE for Tru64 UNIX

•The current Array Configuration Utility kit version is v1.30.70.1a. This kit

supersedes the ACU-XE kit for Tru64 UNIX found in the software media kit

supplied with the KZPDC controller. The kit may be downloaded from the

Smart Array 5300A product web site.

Release Notes – Smart Array 5300A Backplane RAID Controllers 5

OpenVMS Utility Components

General Note

New releases of the HP Insight Management Agents for OpenVMS and Array

Configuration Utility XE are available which address prior incompatibilities

between certain versions of the OpenVMS Management Agent kit and the Smart

Array Configuration Utility. Version compatibility is detailed in the table below:

Table 1: OpenVMS Insight Management Agents Kit - ACUXE Kit

Compatibility

OpenVMS Management Agent Kit

Version and Package Name

Smart Array Configuration Utility Kit

Version and Package Name

Version 3.02, PCSI kit name:

HP-AXPVMS-V73_MGMTAGENTS_V0300-36-1.PCSI

Version B0126, PCSI kit name:

HP-AXPVMS-ACUXE-B0126--1.PCSI

V3.0 and V3.01 No support

Version 2.4, PCSI kit name:

CPQ-AXPVMS-V73_MGMTAGENTS_V0204-11-1.PCSI

Version B0105, PCSI kit name:

COMPAQ-AXPVMS-ACUXE-B0105--1.PCSI

HP Insight Management Agents for OpenVMS

•The new v3.02 release of the HP Insight Management Agents for OpenVMS

provides full Smart Array utility support for the KZPDC controller under

OpenVMS versions 7.3-1 and 7.3-2. This kit must be used in conjunction with

Smart Array Configuration Utility kit version B0126 or later. Kit version

B0105 of the ACU-XE utility is not supported with OpenVMS Management

Agent kit version 3.00 or higher.

•The v3.02 kit can be obtained from the HP Insight Management Agents for

OpenVMS home page located at:

http://h71000.www7.hp.com/openvms/products/mgmt_agents/

•The HP Management Agents for OpenVMS kit version v3.02 supersedes the

kit found in the software media kit supplied with the KZPDC controller.

•Users are strongly advised to review the instructions in the v3.02 kit

Installation Guide before attempting to update system/cluster environments

6 Release Notes – Smart Array 5300A Backplane RAID Controllers

Table des matières

Autres manuels HP Matériel informatique

HP D7171A - NetServer - LPr Manuel utilisateur

HP ML570 - ProLiant - G2 Manuel utilisateur

HP QMH2672 Manuel utilisateur

HP MPEGscope Portable Guide de l'utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP Smart Array P400 Instructions d'utilisation

HP QMH2572 8Gb FC HBA Instructions d'utilisation

HP SC08Ge Manuel utilisateur

HP Xw4600 - Workstation - 2 GB RAM Manuel utilisateur

HP USB 3.0 4-Port SuperSpeed PCIe x1 Card Manuel utilisateur

HP Sangoma 2 Instructions d'installation

HP Wireless USB Network Adapter hn215w Manuel utilisateur

HP Smart Array B140i Manuel utilisateur

HP 64746 Manuel utilisateur

HP Adaptive Rack Cooling System Guide de l'utilisateur

HP P Class 450/500/550/600/650/700/750 Manuel

HP Xw4600 - Workstation - 2 GB RAM Feuille d'instructions

HP Rp5700 - Point of Sale System Instructions d'installation

HP D7171A - NetServer - LPr Manuel d'installation et d'exploitation

HP StoreOnce 2700 Manuel de l'opérateur

HP OmniBook 3100 Manuel utilisateur

HP 64782 Manuel utilisateur

HP Smart Array P400 Instructions d'utilisation

HP 5998-1600 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur