H3C SecPath M9000 NSQM1MBFEA0 Manuel utilisateur

Autres manuels H3C Unité de contrôle

H3C

H3C S9500 LSB1LB1A0 Manuel utilisateur

H3C

H3C LSQ1LBSC0 Manuel utilisateur

H3C

H3C S9500E Series Manuel de la liste des pièces

H3C

H3C PSR360-56A Manuel utilisateur

H3C

H3C EWPA1PCID Manuel utilisateur

H3C

H3C PSR650B-12A2-F Manuel utilisateur

H3C

H3C PSR2400-12AHAH-B Manuel utilisateur

H3C

H3C LSBM1WCM2A0 Manuel utilisateur

H3C

H3C PSR650C-12A Manuel utilisateur

H3C

H3C PSR2400-54A Manuel utilisateur

H3C

H3C S12500 LST1LB1A1 Manuel utilisateur

H3C

H3C SecPath NSQM2GP24TSSC0 Manuel utilisateur

H3C

H3C SecPath PSR300-12A2 Manuel utilisateur

H3C

H3C NSQM1FWDFGC1 Manuel utilisateur

H3C

H3C PSR250-12A1 Manuel utilisateur

H3C

H3C SecPath AC2500 Manuel utilisateur

H3C

H3C SFP-GE-SX-MM850-A Manuel utilisateur

H3C

H3C MSR Router Comware 5 Series Manuel utilisateur

H3C

H3C SIC-4G-LTE-M Instructions d'utilisation et d'entretien

H3C

H3C PSR180-56A Manuel utilisateur

H3C

H3C SecPath PSR300-12A2 Manuel utilisateur

H3C

H3C LSVM2106SFAN Manuel utilisateur

H3C

H3C PSR1600B-12A-B Manuel utilisateur

H3C

H3C PSR450-12A Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

资料版本: 6PW102-20180530 BOM: 3123A1N2

i

H3C SecPath M9000 NSQM1MBFEA0 interface

module

1 Identifier

The module identifier NSQM1MBFEA0 is in the upper right corner of the front panel.

2 Introduction

The NSQM1MBFEA0 interface module is developed for H3C SecPath M9000 gateways. It provides

two subcard slots. By using the interface module with M9000 high-performance service modules, the

M9000 gateway is capable of providing security for 100G networks.

3 Specifications

Figure 1 Front panel

(1) Captive screw (2) Ejector lever

(3) Subcard slot 1 (4) Subcard slot 2

Table 1 Module specifications

Item Specifications

Dimensions (H × W × D) 40 × 399 × 354 mm (1.57 × 15.71 × 13.93 in)

SDRAM (DDR3) 2 GB

Power consumption 41W to 62W

Net weight 2.90 kg (6.39 lb), including the ejector lever

Hot swapping Supported

Ambient temperature •Operating: 0°C to 40°C (32°F to 104°F)

•Storage: –40°C to +70°C (–40°F to +158°F)

Ambient humidity •Operating: 5% RH to 95% RH, noncondensing

•Storage: 5% RH to 95% RH, noncondensing

Compatible device models

•M9006 gateway

•M9010 gateway

•M9014 gateway

资料版本: 6PW102-20180530 BOM: 3123A1N2

ii

4 Installing or removing the module

CAUTION:

•Wear a reliably-grounded ESD wrist strap or ESD gloves before you install or remove the

module.

•Do not touch the components on the module.

4.1 Installing the module

1. Face the front panel of the device and remove the filler panel from the target slot.

This example uses slot 2 on an M9006 gateway.

2. Place the module on a flat surface with the surface-mounted components facing up. Open the

ejector levers, and then gently push the module into the slot along the guide rails.

3. Close the ejector levers and ensure that the module makes close contact with the backplane.

4. Use a Phillips screwdriver to fasten the captive screws on the module.

Figure 2 Installing the module

4.2 Removing the module

1. Use a Phillips screwdriver to loosen the captive screws on the module until all pressure is

released.

2. Open the ejector levers to disengage the module connectors from the backplane, and then pull

the module out of the slot along the guide rails.

3. Place the module on an anti-static workbench or in an anti-static bag with the surface-mounted

components facing up.

4. If you are not to install a new module, install a filler panel in the slot to prevent dust and ensure

good ventilation in the chassis.

Copyright © 2018 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

1

2

3