H3C PSR2400-54D Manuel utilisateur

H3C PSR2400-54D Power Module

User Manual

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6PW103-20181116

and its licensors

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of New H3C

Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any

trademarks that may be mentioned in this document are the property

of their respective owners.

Notice

The information in this document is subject to change without notice.

All contents in this document, including statements, information, and

recommendations, are believed to be accurate, but they are

presented without warranty of any kind, express or implied. H3C shall

not be liable for technical or editorial errors or omissions contained

herein.

Environmental protection

This product has been designed to comply with the environmental

protection requirements. The storage, use, and disposal of this

product must meet the applicable national laws and regulations.

Documentation feedback

You can e-mail your comments about product documentation to

[email protected].

We appreciate your comments

Contents

Overview ·················································· 1

Front panel ···································································· 2

LEDs············································································ 2

Technical specifications ··················································· 4

Power module configuration·············································· 4

Installing and removing the power module······· 6

Installing the power module··············································· 6

Installing the power module ·········································· 7

Connecting the power cord··········································· 9

Removing the power module············································10

Removing the power cord············································10

Removing the power module········································11

Overview

The PSR2400-54D DC-input and DC-output power module is hot

swappable and provides a maximum output of 2400 W.

Table 1 PSR2400-54D power module features

Feature Description

Protection

Protection against input under-voltage, input

over-voltage, output over-voltage, output short

circuit, output under-current, output

over-current, and overheat.

Redundancy The power modules can operate in N+1 or N+N

redundancy. For more information, see "Power

module configuration."

Hot swapping You can install or remove a power module

when the device is operating.

The power module shuts down automatically when its temperature

exceeds the acceptable range. When the temperature returns to the

acceptable range, the power module automatically restarts.

Front panel

Figure 1 Front panel

(1) Power input LED (2) Handle

(3) Screw hole for fastening the power cord connector

(4) Latch (5) DC-input receptacle

(6) Power output LED (7) Air vents

LEDs

The PSR2400-54D power module has two LEDs.

1 2 3

4567

Table 2 LED description

LED Mark Color Description

Power

input

LED INPUT OK Off

No DC power input.

Low DC input voltage. The

power module has entered

protected state.

Green Normal DC input.

Power

output

LED

OUTPUT

Green Normal DC output.

Red

DC output failure. An

alarm condition occurs, for

example, output short

circuit, output over-current,

output over-voltage, output

under-voltage, or remote

shutdown. The power

module has entered the

protected state.

Orange High temperature.

NOTE:

fte

the circuit breaker of the power module is switched off, the

LEDs on the power module will remain on for a while.

Technical specifications

Table 3 Technical specifications

Item Specifications

Rated input voltage –48 V to –60 V

Rated output voltage 54 V

Maximum input current 80 A

Maximum output current 44.5 A

Maximum output power 2400 W

Dimensions (H × W × D) 41 × 100 × 332 mm (1.61 × 3.94

× 13.07 in)

Ambient

temperature

Operating

temperature –10°C to +50°C (–14°F to

+122°F)

Storage

temperature –40°C to + 70°C (–40°F to

+158°F)

Power module configuration

Follow these guidelines to configure power modules for the device:

•Determine the total number of power modules based on the

actual power consumption, the power module slot number, and

power redundancy design.

•Determine the power module redundancy design based on the

power source conditions.

{When two mains power inputs are provided, you can

configure the power modules in N+N redundancy. N+N must

be not greater than the total number of power module slots.

{When one mains power input is provided, you can configure

the power modules in N+1 or N+N redundancy. N+1 or N+N

must be not greater than the total number of power module

slots.

•For easy usage and maintenance, configure a circuit breaker for

each power input. The rated current of the circuit breaker must

be a minimum of 120 A.

Installing and removing the power

module

Installing the power module

To avoid bodily injury and device damage, follow the procedures

in Figure 2 to install a power module.

Figure 2 Power module installation procedure

Before the installation, prepare an ESD wrist strap and a flat-blade

screwdriver yourself.

Installing the power module

1. Wear an ESD wrist strap, and make sure the strap makes good

skin contact and is reliably grounded.

2. Remove the blank panel from the target power module slot.

{If the blank panel is as shown in Figure 3, thread the

flat-blade screwdriver through the hole in the handle of the

blank panel and pull the blank panel out.

{If the blank panel is as shown in Figure 4, put your forefinger

in the hole in the blank panel and pull the blank panel out.

Skip this step if the target slot does not have any blank panel

installed.

Figure 3 Removing a blank panel (1)

Table des matières

Autres manuels H3C Unité de contrôle

H3C

H3C PSR6000 Manuel utilisateur

H3C

H3C PSR150-A1 Manuel utilisateur

H3C

H3C NSQ1FAB04B0 Manuel utilisateur

H3C

H3C SecPath NSQM2GP24TSSC0 Manuel utilisateur

H3C

H3C PSR1600B-12A-B Manuel utilisateur

H3C

H3C NSQ1TGS32SF0 Manuel utilisateur

H3C

H3C SecBlade Manuel utilisateur

H3C

H3C SIC-4G-CAT6 Manuel utilisateur

H3C

H3C NSQM1FWDFGC1 Manuel utilisateur

H3C

H3C SecPath NSQ1FAB04B0 Manuel utilisateur

H3C

H3C LSWM18CQ Manuel utilisateur

H3C

H3C LSVM1S9810FAN Manuel utilisateur

H3C

H3C LSVM152SCFAN Manuel utilisateur

H3C

H3C LSVM2106SFAN Manuel utilisateur

H3C

H3C R6900-FAN Manuel utilisateur

H3C

H3C SecPath NSQ1FAB08D0 Manuel utilisateur

H3C

H3C SecPath M9000-AI NSQM5AIASKA1 Manuel utilisateur

H3C

H3C MSR Router Comware 5 Series Manuel utilisateur

H3C

H3C SecPath DC2400 Manuel utilisateur

H3C

H3C PSR450-12A Manuel utilisateur

H3C

H3C LSUM1TGT24FD0 Manuel utilisateur

H3C

H3C PSR3000-54A Manuel utilisateur

H3C

H3C Campus SeerEngine LSXM1SEERBXC2 Manuel utilisateur

H3C

H3C S9500E Series Manuel de la liste des pièces

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur