H3C LSBM1WCM2A0 Manuel utilisateur

H3C LSBM1WCM2A0

Access Controller Module

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-080414-20080620-C-1.02

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Organization

H3C LSBM1WCM2A0 Access Controller Module Installation Manual is organized as

follows:

Chapter Contents

1 Product Overview Introduces the features and appearance of the H3C

LSBM1WCM2A0 access controller module.

2 Preparing for

Installation

Introduces the installation environment of the H3C

LSBM1WCM2A0 access controller module, the

precautions before and during the installation, and the

tools required for the installation.

3 Installing the Access

Controller Module

Introduces the installation method for the H3C

LSBM1WCM2A0 access controller module, console

cable connection, Ethernet cable connection, and

checks after the installation.

4 Initial Startup of the

Access Controller Module

Introduces the startup and configuration of the H3C

LSBM1WCM2A0 access controller module, including

the establishment of a configuration environment,

connection of the console cable, setting of the terminal

parameters, and startup of the access controller

module.

5 Software Maintenance

Introduces the software maintenance for the H3C

LSBM1WCM2A0 access controller module, covering

the BootWare menus, software upgrade, and password

loss handling.

6 Troubleshooting Introduces problems that may occur during the startup

of the H3C LSBM1WCM2A0 access controller module

and the solutions to these problems.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

Convention Description

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu

items are in Boldface. For example, the New User window

appears; click OK.

> Multi-level menus are separated by angle brackets. For

example, File > Create > Folder.

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Related Documentation

In addition to this manual, each H3C Access Controllers documentation set includes

the following:

Manual Description

H3C WX Series Access

Controllers Operation

Manual

Provides a guide to the operation of H3C access

controllers. The set of manual covers command line

interface, VLAN, system maintenance and debugging,

wireless LAN, IPv4, IPv6, port basic configurations,

multicast protocols, 802.1x, AAA, SSH, ACL, QoS, and

description of the acronyms used throughout the

manual.

H3C WX Series Access

Controllers Command

Manual

Elaborates on the operation commands for H3C access

controllers. The set of manual covers the configuration

commands for VLAN, system maintenance and

debugging, WLAN, IPv4, IPv6, port basic

configurations, multicast protocols, 802.1x, AAA, SSH,

ACL, QoS, and a command index of the whole manual.

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide

Web at this URL: http://www.h3c.com.

The following are the columns from which you can obtain different categories of product

documentation:

[Products & Solutions]: Provides information about products and technologies.

[Technical Support & Document > Technical Documents]: Provides several categories

of product documentation, such as installation and operation.

[Technical Support & Document > Product Support > Software]: Provides the

documentation released with the software version.

Documentation Feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

Table des matières

Autres manuels H3C Unité de contrôle

H3C

H3C LSVM2106SFAN Manuel utilisateur

H3C

H3C LSVM152SCFAN Manuel utilisateur

H3C

H3C LSXM1SEERBXD2 Manuel utilisateur

H3C

H3C PSR750-A Manuel utilisateur

H3C

H3C PSR650C-12A Manuel utilisateur

H3C

H3C PSR300-12A Series Manuel utilisateur

H3C

H3C SecPath DC2400 Manuel utilisateur

H3C

H3C MSR Router Comware 5 Series Manuel utilisateur

H3C

H3C SecPath PSR300-12A2 Manuel utilisateur

H3C

H3C SR6600 SPE-FWM Manuel utilisateur

H3C

H3C SecPath NSQM2GP24TSSC0 Manuel utilisateur

H3C

H3C S9500E Series Manuel de la liste des pièces

H3C

H3C PSR250-12A Manuel utilisateur

H3C

H3C LSVM1S9800FAN Manuel utilisateur

H3C

H3C SecPath NSQ1FAB04B0 Manuel utilisateur

H3C

H3C Campus SeerEngine LSXM1SEERBXC2 Manuel utilisateur

H3C

H3C S9500 LSB1FW2A0 Manuel de la liste des pièces

H3C

H3C LSQ1LBSC0 Manuel utilisateur

H3C

H3C SecPath M9000 NSQM1CGQ20 Manuel utilisateur

H3C

H3C SIC-4G-LTE-M Instructions d'utilisation et d'entretien

H3C

H3C NSQM1FWDFGC1 Manuel utilisateur

H3C

H3C SIC-4G-CAT6 Manuel utilisateur

H3C

H3C SecPath NSQM2AC1400 Manuel utilisateur

H3C

H3C SecPath M9000 NSQM1MBFEA0 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur