H3C SecPath M9000 NSQM1CGQ20 Manuel utilisateur

Manual version: 6PW104-20190808 BOM: 3123A1N3

H3C SecPath M9000 NSQM1CGQ20 interface module

1 Identifier

The module identifier NSQM1CGQ20 is in the upper right corner of the front panel.

2 About the module

The NSQM1CGQ20 interface module is developed for H3C SecPath M9000 and M9000-S gateways.

It provides two 100GBASE-R fiber ports. By using the interface module with M9000 and M9000-S

high-performance service modules, the M9000 and M9000-S gateways are capable of providing

security for 100G networks.

3 Specifications

Figure 1 Front panel

(1) 100GBASE-R fiber ports (2) Ejector lever

(3) 100GBASE-R fiber port LEDs (4) Captive screw

Table 1 Module specifications

Item Specifications

Dimensions (H × W × D) 37 × 174 × 194 mm (1.46 × 6.85 × 7.64 in)

Power consumption 15 W to 16 W

Net weight 0.66 Kg (1.45 lb)

Hot swapping Not supported

Ports 2 × 100GBASE fiber port

Ambient temperature •Operating: 0°C to 45°C (32°F to 113°F)

•Storage: –40°C to +70°C (–40°F to +158°F)

Ambient humidity •Operating: 10% RH to 95% RH, noncondensing

•Storage: 5% RH to 95% RH, noncondensing

Manual version: 6PW104-20190808 BOM: 3123A1N3

Item Specifications

Compatible service modules and slots •NSQM1MBFEA0 interface switch module (slot 2)

•NSQM2MBFEA0 interface switch module (slot 2)

Table 2 100GBASE-R port specifications

Item Specifications

Connector type LC

Transmission rate 100 Gbps

Transmission medium and maximum transmission distance See Table 3

Table 3 describes the QSFP28 transceiver modules available for the 100GBASE-R fiber ports.

Table 3 QSFP28 transceiver module specifications

QSFP28 transceiver

module Central

wavelength Connector Cable

specifications

Max.

transmission

distance

QSFP-100G-SR4-MM850 840 to 860nm MPO 50/125 µm, MMF 100 m (328.08 ft)

QSFP-100G-LR4-WDM1300 1310 nm LC 9/125 µm, SMF 10 km (6.21 miles)

4 LEDs

The module provides a LED for each 10GBASE-R port to indicate its link and data forwarding status.

Table 4 LED description

LED mark Status Description

ACT

Flashing The port is sending or receiving data.

On A link is present on the port.

Off No link is present on the port.

5 Installing or removing the module

CAUTION:

•Wear a reliably-grounded ESD wrist strap or ESD gloves before you install or remove the

module.

•Do not touch the components on the module.

5.1 Installing the module

1. Face the front panel of the device and remove the filler panel from the target slot.

2. Place the module on a flat surface with the surface-mounted components facing up. Open the

ejector lever, and then gently push the module into the slot along the guide rails.

3. Close the ejector lever and ensure that the module makes close contact with the backplane.

4. Use a Phillips screwdriver to fasten the captive screw on the module.

Manual version: 6PW104-20190808 BOM: 3123A1N3

iii

Figure 2 Installing the module

5.2 Removing the module

1. Use a Phillips screwdriver to loosen the captive screw on the module until all pressure is

released.

2. Open the ejector lever to disengage the module connectors from the backplane, and then pull

the module out of the slot along the guide rails.

3. Place the module on an anti-static workbench or in an anti-static bag with the surface-mounted

components facing up.

4. If you are not to install a new module, install a filler panel in the slot to prevent dust and ensure

good ventilation in the chassis.

The information in this document is subject to change without notice.

Autres manuels H3C Unité de contrôle

H3C

H3C LSQM1TGT24FD0 Manuel utilisateur

H3C

H3C PSR180-56A Manuel utilisateur

H3C

H3C PSR1600B-12A-B Manuel utilisateur

H3C

H3C NSQ1TGS32SF0 Manuel utilisateur

H3C

H3C LSQM1CGS2QSA0 Manuel utilisateur

H3C

H3C LSVM2106SFAN Manuel utilisateur

H3C

H3C PSR3000-54A Manuel utilisateur

H3C

H3C SecPath DC2400 Manuel utilisateur

H3C

H3C LSVM1S9810FAN Manuel utilisateur

H3C

H3C SecPath M9000-AI NSQM5AIASKA1 Manuel utilisateur

H3C

H3C PSR1800-56A Manuel utilisateur

H3C

H3C SecPath M9000 NSQM1MBFEA0 Manuel utilisateur

H3C

H3C PSR750-A Manuel utilisateur

H3C

H3C PSR2400-12AHAH-B Manuel utilisateur

H3C

H3C PSR450-12A Manuel utilisateur

H3C

H3C LSWM18CQ Manuel utilisateur

H3C

H3C SecBlade Manuel utilisateur

H3C

H3C SecPath NSQM2AC1400 Manuel utilisateur

H3C

H3C S9500E Series Manuel de la liste des pièces

H3C

H3C SR6600 SPE-FWM-200 Manuel utilisateur

H3C

H3C SecPath PSR300-12A2 Manuel utilisateur

H3C

H3C SFP-GE-SX-MM850-A Manuel utilisateur

H3C

H3C PSR150-A1 Manuel utilisateur

H3C

H3C SecPath AC2500 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur