CYP CPLUS-12FTX Manuel utilisateur
CPLUS-12FTX
4K UHD+HDMI over Fiber Transmitter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VS1 21/06/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 3
6.3 WebGUI Control ........................................ 4
6.4 RS-232 Control ......................................... 11
6.5 Telnet Control .......................................... 11
6.6 RS-232 and Telnet Commands .............. 12
7. Connection Diagram ....................................16
7.1 Conguration 1........................................ 16
7.2 Conguration 2........................................ 17
8. Specications ................................................18
8.1 Technical Specications ........................ 18
8.2 Video Specications............................... 19
8.3 Cable Specications .............................. 20
9. Acronyms .......................................................20
1
1. INTRODUCTION
This HDMI over Fiber Transmitter is designed to extend your 4K UHD
HDMI signal using a single segment of multi-mode optical ber
cable. Using ber optical cable provides many advantages over
traditional copper-based extension methods, including immunity to
RF and magnetic interference, thinner and lighter cables, and much
longer extension distances (up to 300 meters per segment). Multiple
ber Transceiver units can be placed between the Transmitter and
Receiver to greatly extend the total extension distance via cascading
(up to 300 additional meters per Transceiver) if the extra distance or
exibility is desired.
The HDMI input and output of this unit supports resolutions up
to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to
1080p@60Hz, HD audio formats and other features dened by
the HDMI 2.0 specication. The HDMI and Fiber outputs of this unit
are mirrored, however HDMI sources with bandwidth higher than
10.2Gbps are automatically chroma and/or bit-depth subsampled for
transmission over the ber output. Six pre-dened internal EDIDs, two
external EDID selections and a User uploaded EDID are available for
EDID management. The unit provides intuitive front panel controls as
well as RS-232, Telnet and WebGUI control options.
2. APPLICATIONS
• Entertainment Rooms & Home Theaters
• Showrooms & Demo Rooms
• Lecture Hall Presentations
• Public Commercial Displays
3. PACKAGE CONTENTS
• 1×HDMI over Fiber Transmitter
• 1×5V/2.6A DC Power Adapter
• 1×3.5mm to 9-pin D-sub Adapter Cable
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
• HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
• Use of the optical ber output requires a compatible ber Receiver
or Transceiver and appropriate paired LC multi-mode ber in a
crossover conguration.
5. FEATURES
• HDMI with 3D & 4K@60Hz with HDR support
• DVI 1.0 compliant with the use of an HDMI-DVI adaptor
• HDCP 2.2 and 1.x compliant
• 1 HDMI (18Gbps) input
• Mirrored HDMI (18Gbps) and ber (10.2Gbps, LC pair, multimode)
outputs
• Supports UHD resolutions up to 4K@60Hz (4:4:4, 8-bit)
• Supports 16-bit Deep Color up to 1080p@60Hz
• HDMI sources with bandwidth higher than 10.2Gbps are
automatically chroma and/or bit-depth subsampled for transmission
over the ber output
• Supports pass-through of audio formats: LPCM 2.0/5.1/7.1, Bitstream,
and HD Bitstream
• Comprehensive EDID management support including 6 pre-dened
internal EDIDs, 2 external EDIDs, and 1 User uploaded EDID
• Compatible with the 3×2 HDMI and Fiber Matrix Transceiver
(optional)
• Fiber transmission distances of up to 300 meters
• Supports control via front panel, WebGUI, Telnet, and RS-232
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE POWER
4K UHD+ HDMI / FIBER
TRANSMITTER
21
1SERVICE: This slot is reserved for rmware update use only.
2POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
6.2 Rear Panel
OUT
DC 5VRS-232
CONTROL
FIBER A HDMI 1HDMI B
3
21
4 5
1FIBER A & HDMI B OUT: Connect the HDMI output to an HDMI TV,
monitor or amplier for digital video and audio output. Connect
the ber (paired LC) output to the ber input on a compatible ber
Receiver or Transceiver unit.
Note: HDMI sources with bandwidth higher than 10.2Gbps
are automatically chroma and/or bit-depth subsampled for
transmission over the ber output.
2HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
3CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
4RS-232: Connect, via the provided 9-pin adapter cable, to a PC,
laptop or other serial control device to send RS-232 commands to
control the unit.
5DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
4
6.3 WebGUI Control
• Device Discovery APP
Please obtain the “Device Discovery” software from your authorized
dealer and save it in a directory where you can easily nd it.
Connect the unit and your PC/Laptop to the same active network
and execute the “Device Discovery” software. Click on “Find Devices
on Network” and a list of devices connected to the local network will
show up indicating their current IP address.
Note: The unit’s default IP address is 192.168.1.50.
By clicking on one of the listed devices you will be presented with the
network details of that particular device.
1) IP Mode: If you choose, you can alter the static IP network settings
for the device, or switch the unit into DHCP mode to automatically
obtain proper network settings from a local DHCP server. To switch
to DHCP mode, please select DHCP from the IP mode drop-down,
then click “Save” followed by “Reboot”.
2) WebGUI Hotkey: Once you are satised with the network settings,
you may use them to connect via Telnet or WebGUI. The network
information window provides a convenient link to launch the
WebGUI directly.
5
• WebGUI Control Page
After connecting to the WebGUI’s address in a web browser, the
login screen will appear. Please enter the appropriate user name and
password then click “Submit” to log in.
Note: The default user name and password is “admin”.
On the left side of the browser you will see the following menu tabs
where all primary functions of the unit (Video, EDID Settings and
System Settings) are controllable via the built in WebGUI. The individual
functions will be introduced in the following sections.
Clicking the red “Logout” tab will automatically log the currently
connected user out of the WebGUI and return to login page.
Table des matières
Autres manuels CYP Émetteur
CYP
CYP DCT-30TX Manuel utilisateur
CYP
CYP CSI-8H8CVTX Manuel utilisateur
CYP
CYP CH-1106TX & RX Manuel utilisateur
CYP
CYP CH-516TXAS Manuel utilisateur
CYP
CYP CH-1529TXPLV Manuel utilisateur
CYP
CYP CH-2605TXV Manuel utilisateur
CYP
CYP PUV-1710LTX-AVLC Manuel utilisateur
CYP
CYP CHDBT-1H7CE Manuel utilisateur
CYP
CYP CHDBT-1H3CE Manuel utilisateur
CYP
CYP PUV-1602TXWP Manuel utilisateur
CYP
CYP IP-A750TX Manuel utilisateur
CYP
CYP CH-103TX Manuel utilisateur
CYP
CYP CH-107TX Manuel utilisateur
CYP
CYP AVIP-P5104T-B1C Manuel utilisateur
CYP
CYP CH-1107 TX Manuel utilisateur
CYP
CYP PUV-1510TX Manuel utilisateur
CYP
CYP PUV-1510RXWP Manuel utilisateur
CYP
CYP Dante AU-DTI4-TX Manuel utilisateur
CYP
CYP CH-507TXBD: CH-507RXBD Manuel utilisateur
CYP
CYP PU-1109 Manuel utilisateur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
