CYP CLUX-41W Manuel utilisateur

CLUX-41W

4 by 1 HDMI 1.3 Switcher

Operation Manual

CLUX-41W

Revision History

Version No. Date Summary of Change

V1 20090514 Preliminary Release

Precaution

Failure to follow the precautions described below may cause damage to

4 by 1 HDMI 1.3 Switcher and void the warranty.

 DO NOT open the case. Doing so will void the warranty. If you ﬁnd

problem with it, please return back to your retailer or seller who will

assist you or provide you with solution.

 DO NOT use third-Party AC adapter or power cord. Doing so may

damage 4 by 1 HDMI 1.3 Switcher.

 DO NOT bump, jar or drop contents of the products as it may

damage it and result in warranty void.

 DO NOT set any liquids or beverages on the drive as they may

damage 4 by1 HDMI 1.3 Switcher.

Table of Contents

1. Introduction…………………………………………………........……….

2. Application…………………………………………………................….

3. Contents……………………………………………….........................…

4. System Requirement…………………………………….…….......…….

5. Features…………………………………………….......……........………

6. Operation Controls and Functions…………………………………….

6.1 Top Panel .................................................................................

6.2 Front Panel………………………………………….........….….…

7. Remote Control.....................…………………………….........……..…

8. Connection and Installation…………………………….........……..…

9. Specications……………………………………………...........………..

1. Introduction

This is a high performance HDMI v1.3 Switcher with remote control. It allows

various HDMI sources to share a HDTV display. Simply press the button

to select your desire HDMI source for display on the HDTV. The device is

compatible to HDMI v1.3 speciﬁcations, and can deﬁne to support Deep

Color transfer (10-bit and 12-bit) video and new lossless compressed (Dolby

TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high

bandwidth up to 225MHz.

2. Application

 Showroom display control

 Educational demo

 Installation usage

 Advertising display

3. Contents

 4 by 1 HDMI 1.3 Switcher

 Remote Controller

 Power adaptor

 Operational Manual

4. System Requirement

Input source equipments with HDMI cable and output displayer with HDMI

cable.

5. Features

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant.

 Deep color video up to 12bit, 1080p@60Hz.

 Four HDMI sources to connect up to a HDMI display simultaneously.

 Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate).

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA and

480i to 1080p.

 Full HDCP Compliant.

 HDMI cable distance test with 1080p/8-bit resolution, the input/output

can run up to 15/15 meters. If 1080p/12-bit, the input/output source can

run up to 10/15 meters.

 Support xvYCC.

 Support CEC bypass.

 Support Sys. Reset function with hot key switch to reset the system within

8~10 minutes into factory mode.

① DC 5V: Plug the 5VDC power

supply into the unit and connect

the adaptor to AC wall outlet.

①

6.2 Front Panel

① HDMI OUTPUT: Connect your LCD

TV or HD monitor with HDMI cables.

② Power LED: Red LED will illuminate

when the Power is On.

③ Power switch: Switch to ON to

turn on the device or switch to

OFF to set the device standby. The

factory default is OFF.

④ Sys. Reset: System reset function.

It is suggested having this function

switch OFF always except when

doing system reset. By switching

to ON, the system will reset HDMI

output to HDMI input1gradually

within 8~10 minutes and therefore

HDMI input 1 should be connected.

Switching to OFF means CEC

bypass. Factory default is OFF.

Note: The system reset function will

only functioning when the display is

built with CEC function.

⑤ INPUT: Input button for selecting

input channel.

1~4: Input LED, the blue LED will

illuminate with selected input

channel.

⑥ IR: IR Receiver.

⑦ HDMI INPUT: Connect the

equipments to the HDMI input ports

such as DVD player, Blue Ray, PS3

and or other sources with HDMI

cable. The factory default is on

input 1.

6. Operation Controls and Functions

6.1 Top Panel

③

④

①

⑤

⑥

⑦

②

LUX-41W

INPUT

HDMI OUT

INPUT

Power

Sys.Reset

OFF

4X1 HDMI V1.3 Switcher

LUX-41W

DC 5V

7. Remote Control

① Power button: Press to switch On the device,

press it again to set the device in standby

mode.

② 1~4: Press the desire input button to select the

input source.

8. Connection and Installation

30˚30˚

3 M

7 M

3 MBlue Ray

DVD

PS3

LCD TV

20090519 MPM-CLUX41W

Home page: http://www.cypress.com.tw

CYPRESS TECHNOLOGY CO., LTD.

9. Specications

Frequency bandwidth 2.25Gbps (single link)

Input port 4 x HDMI Female ports

Output port 1 x HDMI Female port (single link)

HDMI output resolution 480i~1080p 50/60, 1080p24, VGA~UXGA

Power Supply 5VDC / 1A (US/EU standards, CE/FCC/UL certiﬁed)

Dimensions (mm) 93(W) x 148 (D) x 31 (H)

Weight (g) 210

Chassis Material Aluminum

Silk Skin Color Silver

Operating Temperature From 0 ºC ~ 40 ºC

Power Consumption 2W

Table des matières

Autres manuels CYP Changer

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur