CYP CPLUS-V4H1H Manuel utilisateur

CPLUS-V4H1H

4K UHD+4×1 HDMI Switcher

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 03/10/16 Preliminary release

VS1 11/10/16 Final technical review

VS2 16/01/18 Additional RS-232 commands &

Updated resolution support list

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................1

5. Features............................................................2

6. Operation Controls and Functions.................2

6.1 Front Panel ................................................. 2

6.2 Rear Panel.................................................. 3

6.3 Remote Control [Optional]...................... 3

6.4 IR Cable Pinouts [Optional] ..................... 3

6.5 RS-232 Control ........................................... 4

6.6 RS-232 Commands.................................... 4

7. Connection Diagram ......................................7

8. Specications ..................................................8

8.1 Technical Specications .......................... 8

8.2 Video Specications................................. 9

9. Acronyms .......................................................10

1. INTRODUCTION

This 4 by 1 HDMI Switcher is a brand new high performance design for

the next generation of audio/video equipment. It allows a single HDMI

output to switch between 4 HDMI sources. This unit comes with full

support for 18Gbps (600Mhz) resolutions up to, and including 4K@60Hz

(4:4:4, 8-bit) as well as support for 16-bit Deep Color up to 1080p60Hz,

HDR (High Dynamic Range), HD audio and other features dened by

the HDMI 2.0a specication. The included auto switching functionality

allows for the possibility of hands-free, user friendly, operation. Control

is provided via front panel buttons, IR remote, and RS-232.

2. APPLICATIONS

• Demo Room Displays

• Hotel Lobby Information Displays

• Showrooms and Demo Rooms

• Public Commercial Displays

• Home Theaters

3. PACKAGE CONTENTS

• 1×4 by 1 HDMI Switcher

• 1×5V/2.6A DC Power Adapter

• 1×3.5mm to IR Extender Cable [Optional]

• 1×Remote Control (CR-72) [Optional]

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI 2.0a and DVI 1.0 compliant

• HDCP 1.x and 2.2 compliant

• 4 HDMI inputs and 1 HDMI output

• Supports UHD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) &

4096×2160@60Hz (4:4:4, 8-bit)

• Supports 16-bit Deep Color up to 1080p@60Hz

• Supports 10-bit and 12-bit HDR pass-through

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

Bitstream, and HD Bitstream

• CEC pass-through

• Support Internal/External EDID management

• Controllable via front-panel buttons, RS- 232, and optional IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

4x1 4K UHD+ Switcher

POWER 1234INPUT

IR IN

1 2 3 4 5

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2INPUT BUTTON: Press this button to sequentially switch through the

available inputs.

3INPUT 1~4 LEDs: The illuminated LED indicates which source is

currently selected.

4IR WINDOW: Accepts IR signals from the optional IR remote for

control of this unit only.

5IR IN: Connect to the optional IR Extender to extend the IR control

range of the unit. Ensure that the remote being used is within direct

line-of-sight of the IR Extender.

6.2 Rear Panel

INPUT 4 INPUT 3 INPUT 2 INPUT 1

RS-232

DC 5V

OUTPUT SERVICE

1 2 3 4 5

1OUTPUT: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output.

2INPUT 1~4: Connect to HDMI source equipment such as media

players, game consoles or set-top boxes.

3RS-232: Connect directly to your PC/laptop to send RS-232

commands to control the unit.

4SERVICE: This slot is reserved for rmware update use only.

5DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

6.3 Remote Control [Optional]

1POWER: No function.

2INPUT 1~4: Press any of these buttons to switch

to the corresponding input.

6.4 IR Cable Pinouts [Optional]

Infrared

Power

Ground

IR Extender

CR-72

POWER

INPUT

6.5 RS-232 Control

UNIT TERMINAL SERIAL PORT SETTINGS

Pin Pinout Pin Pinout Baud Rate 115200

1 1 Data Bits 8

2Tx 2Rx Parity Bits None

3Rx 3Tx Stop Bits 1

4 4 Flow Control None

5 GND 5 GND

6 6

7 7

8 8

9 9

6.6 RS-232 Commands

Command Description and Parameters

?Show the full command list.

HELP Show the full command list.

OUT N1 Select the input to display.

Available values for N1:

1~4 [Input number]

0 [Mute]

OUT ?Show which input is currently selected.

SOURCEDET Show the current input detection status.

SINKINFO Show information about the connected display.

HDCPIN N1 N2 Set the HDCP mode for input N1.

N1 = 1~4 [Input number]

Available values for N2:

1 [Follow in]

2 [Follow out]

3 [HDCP Disabled]

Command Description and Parameters

HDCPIN ?Show the current HDCP status.

EDIDMODE N1 Set the EDID Mode.

Available values for N1:

1 [All]

2 [Appoint]

EDIDMODE ?Show the current EDID mode.

EDIDALL N1 Set the EDID to use in “EDID All” mode.

Available values for N1:

1 [FHD/2CH]

2 [FHD/MCH]

3 [UHD/2CH]

4 [UHD/MCH]

5 [UHD+/2CH]

6 [UHD+/MCH]

7 [Sink]

EDIDALL ?Show the currently selected EDID for “EDID All”

mode.

EDIDIN N1 N2 Set the EDID to assign to Input N1 in “Appoint”

mode.

N1 = 1~4 [Input number]

Available values for N2:

1 [FHD/2CH]

2 [FHD/MCH]

3 [UHD/2CH]

4 [UHD/MCH]

5 [UHD+/2CH]

6 [UHD+/MCH]

7 [Sink]

EDIDIN ?Show the EDID assignments for all inputs mode.

AUTOSWITCH N1 Enable or disable the auto switching mode.

Available values for N1:

0 [Off]

1 [On]

AUTOSWITCH ?Show the current state of the auto switch mode.

Autres manuels pour CPLUS-V4H1H

Table des matières

Autres manuels CYP Changer

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur