Creality CR-10 S5 Manuel utilisateur

The CR-10 S5 is one of the biggest available consumer printers. If you decide to

buy one, make sure to clear up some space in your toolshed or lab. Also, make

sure to include some additional space for the control box.

Although being marketed as a 3D printer kit, the Creality CR-10 S5 comes mostly

pre-assembled. All you have to do is to mount the Z-axis to the base, connect the

cables and you’re ready to 3D print. This shouldn’t take longer than 30 to 60

minutes.

In the box, you will find these parts:

2 pre-assembled frames

tools for the assembly of the Creality CR-10 S5

some spare parts

Spatula for removing the print from the glass bed

Needle for cleaning of clogged nozzles

Teflon tube

PLA filament spool

filament holder

UBS cable

AC cable

Filament Runout Detection Sensor: A feature found pretty commonly today.

You run the 3D printed sensor between the spool and the hotend. If the filament

runs out, the mechanical sensor picks up the information and pauses the print, so

you can resume later. This is one of the major improvements of the Creality CR-

10 S5 3D Printer. And rest assured, it will come in handy you’ll start printing

bigger models.

External control board: As with Creality CR-10, the power brick, the

RAMboard, and controls are located in a separate external “brick”. The spool

holder is mounted on top. The heated bed now also uses a MOSFET for

electrical safety. Also, the cables are significantly longer than on the regular CR-

10.

Dual Z Rod Screws & Motors: As the form factor’s bigger, Creality uses two Z

axis screw rods and motors on this printer. This leads to a more reliable

performance. The Dual Lead Screw design will also stabilize the machine during

tall prints.

Auto-resume feature: In case of a power failure, the Creality CR-10 S5

remembers where it left off and will resume printing when you start it up again.

Heated bed: The Creality CR-10 S5 has a heated bed that lets you operate and

experiment with a lot of materials.

Connections: Connection-wise the Creality CR-10 S5 offers Micro-SD card and

a USB connector.

Removable glass bed: The bed can easily be removed to pluck the print off the

bed. Also, Creality throws in a spool of Kapton tape if you don’t want to print on

the bed directly.

Improved build quality: In comparison to the Creality CR-10, the quality of the

parts has been ramped up in the Creality CR-10 S5. Instead of using 3D printed

components, the frame uses injection-molded parts and aluminum rods.

GENERAL SPECIFICATIONS

Technology: FDM

Assembly: mostly assembled

Mechanical arrangement: Cartesian style

Manufacturer: Creality

3D PRINTING PROPERTIES

Build volume: 500 x 500 x 500 mm

Layer height: 100 –300 microns

Extruder style: Bowden

Extruder type: Single

Nozzle size: 0.4 mm

Max. extruder temperature: 260 °C

Max. heated bed temperature: 90 °C

Printing speed: 200 mm/s

Print chamber: Open

Bed leveling: Manual with optional upgrade

Connectivity: SD-Card, WiFi

Build-in camera for monitoring: No

MATERIALS:

Filament diameter: 1,75 mm

Third party filament: Yes

Filament materials: PLA, ABS, PETG, TPU, wood, carbon fiber

SOFTWARE REQUIREMENTS:

Operating system: Windows, Mac, Linux

Recommended Slicer: Cura, Simplify3D, Slic3r, Repetier Host

File types: STL, OBJ, DAE, AMF

DIMENSIONS AND WEIGHT:

Frame dimensions: 690 x 800 x 715 mm

Weight: 14 kg

To make matters even more complicated, Creality offers a “CR-10 S5” model.

This one has an even bigger build volume of 500 x 500 x 500 mm. Otherwise, it‘s

based on the Creality CR-10S.

Autres manuels pour CR-10 S5

Table des matières

Autres manuels Creality Imprimante 3D

Creality

Creality LD-006 Manuel utilisateur

Creality

Creality Ender-3 Manuel utilisateur

Creality

Creality CR-10S Pro Manuel

Creality

Creality CR-10 V3 Manuel utilisateur

Creality

Creality Ender-5 Manuel

Creality

Creality CR-10 S5 Instructions de montage

Creality

Creality CR-10 Series Manuel utilisateur

Creality

Creality CR-10 Max Manuel utilisateur

Creality

Creality Ender-3 V3 SE Manuel utilisateur

Creality

Creality K1 Max Manuel utilisateur

Creality

Creality CR-10 SE Manuel utilisateur

Creality

Creality CR-6 Max Manuel utilisateur

Creality

Creality CR-100 Manuel

Creality

Creality HALOT-LITE Manuel utilisateur

Creality

Creality Ender-6 Manuel utilisateur

Creality

Creality CR-X Manuel utilisateur

Creality

Creality CR-5 Pro Manuel utilisateur

Creality

Creality CR-X Pro Manuel utilisateur

Creality

Creality Ender-3 V3 KE Manuel utilisateur

Creality

Creality Dual Z Manuel utilisateur

Creality

Creality CR-6 Max Manuel utilisateur

Creality

Creality BLTouch Manuel utilisateur

Creality

Creality Ender-3 S1 Manuel utilisateur

Creality

Creality HALOT-ONE PRO Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur