Creality CR-100 Manuel

CR-100 Guide Book

本说明书依据CR-1003D打印机编制而成

This guide book is for standard CR-100.

详细使用指南见TF卡

Detailed instructions for user are available on the TF card.

Screen

Button board

USB port

Power port

TF Slot

Extuder

Holder

Nozzle

Power Switch

Parameter

Model CR-100

MoldingTech.FDM

PrintingSize 100*100*80mm

PrintingSpeed ≤180mm/s，Normal 30-60MM/S

Precision ±0.1mm

LayerThickness 0.1-0.4mm

NozzleDiameter 0.4mm

Nozzle Temp. 200℃

PrintingMode TF card One-button Print，oﬄine printing, Remote printing

FileFormatstl，obj，amf

SliceSoftwareCreality Slicer/Cura/Simplify3D

PowerSupply Input:100-240V AC 1.2A 50/60Hz

Output:DC 12V 5.0A

Total Power60W

Filament φ1.75mm PLA

Function Description

Installation Holder

Filament

1. Insert the holder into the mounting hole then turn it to

the right to lock it.

2. Put the ﬁlament on the holder.

Start/Pause：

First Click ：Start to Printing after

heating to 200℃

Second Click：Stop printing

Third Click：Continue Printing

Home：Return to origin

Heat/Cool：

First Click：Heating to 200℃。

Second Click：Stop to heat,

Cooling to room

temperature

Remote Control Button Panel

Load Filament

Filament

Clip

Magnetic Platform

Platform

Place the magnetic platform on the printing

platform, and ﬁx it by clips.

1. Pressing to heat，waiting the tempreature of nozzle to arrive 200℃.

2. Pressing the extrusion clamp, pass the ﬁlament through the extruder and

PTFE tube into the nozzle, untill the ﬁlament overﬂow

*After heating, Press the extrusion clamp, pull out the ﬁlament to remove.

Load Filament

Install Platform

1. Insert the TF card into the TF slot of

the printer

2. Click to wait for the nozzle to

heat up to 200 ° C

3. Model will be printed after 2 minutes

* It only will print the ﬁrst model in

the TF card

Note

In case ofemergency, please turnoﬀthe power ofthe

3D printer directly.

Please use a3D printer in aspacious, level, and well

ventilated environment.

It is recommended that using printer in the temperature

of8℃-40℃and ahumidity of20%- 50%. outside this

range may result in poor printing results.

Do not disassemble the 3D printer without permission.

Ifyou have anyproblems, please contact：

cs@creality3d.cn

Run “User Guide” in the TF card for more usage

information.

One-button Print

Autres manuels Creality Imprimante 3D

Creality

Creality CR-10 V3 Manuel utilisateur

Creality

Creality Ender-5 Manuel

Creality

Creality CR-10S Pro Manuel

Creality

Creality HALOT-ONE Manuel utilisateur

Creality

Creality CR-200B Pro Manuel utilisateur

Creality

Creality Ender-3 Manuel utilisateur

Creality

Creality CR-10 Series Manuel utilisateur

Creality

Creality HALOT-ONE PLUS Manuel utilisateur

Creality

Creality CR-X Fiche technique

Creality

Creality Sermoon V1 Manuel utilisateur

Creality

Creality Sermoon D3 Manuel utilisateur

Creality

Creality CR-Scan Ferret 3D Pro Manuel utilisateur

Creality

Creality CR-5 Manuel utilisateur

Creality

Creality CR-M4 Manuel utilisateur

Creality

Creality Ender-5 Manuel

Creality

Creality CR-10 SE Manuel utilisateur

Creality

Creality 3dpRINTmILL Manuel utilisateur

Creality

Creality 3dpRINTmILL Manuel utilisateur

Creality

Creality Halot-Sky Manuel utilisateur

Creality

Creality Sonic Pad Manuel utilisateur

Creality

Creality Dual Z Manuel utilisateur

Creality

Creality Ender-3 Manuel

Creality

Creality Laser Module Manuel utilisateur

Creality

Creality CR-10 Max Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur