Bosch PLR50 C Manuel utilisateur

English | 25

Bosch Power Tools 1 609 92A 1F3 | (20.8.15)

Luxemburg

Tel.: +32 2 588 0589

Fax: +32 2 588 0595

E-Mail: outillage.gere[email protected]osch.com

Entsorgung

Messwerkzeuge, Zubehör und Verpackungen sollen einer umweltgerechten Wieder-

verwertung zugeführt werden.

Werfen Sie Messwerkzeuge nicht in den Hausmüll!

Nur für EU-Länder:

Gemäß der europäischen Richtlinie 2012/19/EU müssen nicht

mehr gebrauchsfähige Messwerkzeuge und gemäß der europäi-

schen Richtlinie 2006/66/EG müssen defekte oder verbrauchte Ak-

kus/Batterien getrennt gesammelt und einer umweltgerechten Wie-

derverwendung zugeführt werden.

Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei:

Deutschland

Recyclingzentrum Elektrowerkzeuge

Osteroder Landstraße 3

37589 Kalefeld

Schweiz

Batrec AG

3752 Wimmis BE

Änderungen vorbehalten.

English

Safety Notes

Allinstructions mustbereadand observedinorder to work safely

with the measuring tool. The integrated protections in the meas-

uring tool may be compromised if the measuring tool is not used

in accordance with the instructions provided. Never make warn-

ing signs on the measuring tool unrecognisable. STORE THESE IN-

STRUCTIONS IN A SAFE PLACE AND INCLUDE THEM WITH THE MEASURING

TOOL WHEN GIVING IT TO A THIRD PARTY.

OBJ_BUCH-2326-003.book Page 25 Thursday, August 20, 2015 8:43 AM

26 | English

1 609 92A 1F3 | (20.8.15) Bosch Power Tools

Caution – The use of other operating or adjusting equipment or the applica-

tion of other processing methods than those mentioned here can lead to dan-

gerous radiation exposure.

Themeasuringtoolisprovided with a warning label (marked with number 7in

the representation of the measuring tool on the graphics page).

If the text of the warning label is not in your national language, stick the pro-

vided warning label in your national language over it before operating for the

first time.

Do not direct the laser beam at persons or animals and do not

stare into the direct or reflected laser beam yourself, not even

from a distance. You could blind somebody, cause accidents or

damage your eyes.

If laser radiation strikes your eye, you must deliberately close your eyes and

immediately turn your head away from the beam.

Do not make any modifications to the laser equipment.

Do not use the laser viewing glasses as safety goggles. The laser viewing glass-

es are used for improved visualisation of the laser beam, but they do not protect

against laser radiation.

Do not use the laser viewing glasses as sun glasses or in traffic. The laser view-

ing glasses do not afford complete UV protection and reduce colour perception.

Have the measuring tool repaired only through qualified specialists using

original spare parts. This ensures that the safety of the measuring tool is main-

tained.

Do not allow children to use the laser measuring tool without supervision.

They could unintentionally blind other persons or themselves.

Do not operate the measuring tool in explosive environments, such as in the

presence of flammable liquids, gases or dusts. Sparks can be created in the

measuring tool which may ignite the dustor fumes.

Caution! When using the measuring tool with Bluetooth®, interference with

other devicesand systems, airplanes and medical devices(e.g.,cardiac pace-

makers, hearing aids) may occur. Also, the possibility of humans and animals

OBJ_BUCH-2326-003.book Page 26 Thursday, August 20, 2015 8:43 AM

English | 27

Bosch Power Tools 1 609 92A 1F3 | (20.8.15)

in direct vicinity being harmed cannot be completely exempt. Do not use the

measuring tool with Bluetooth®in the vicinity of medical devices, petrol sta-

tions, chemical plants, areas where there is danger of explosion, and areas

subject to blasting. Do not use the measuring tool with Bluetooth®in air-

planes. Avoid operation in direct vicinity of the body over longer periods.

Do not use the measuring tool if the touchscreen is visibly damaged (e.g.

cracks in the surface etc.).

The Bluetooth®word mark and logos are registered trademarks owned by Blue-

tooth SIG, Inc. and any use of such marks by Robert Bosch GmbH is under li-

cense.

Product Description and Specifications

Intended Use

The measuring tool is intended for measuring distances, lengths, heights, clearances

and inclines, and for calculating areas and volumes.

The measuring results can be transferred to other devices via Bluetooth®.

The help function integrated into the measuring tool provides detailed animations

about individual measuring functions/procedures.

Technical Data

Digital Laser Measure PLR 50 C

Article number 3 603 F72 2..

Distance measurement

Measuring range 0.05–50 mA)

Measuring accuracy (typical) ±2.0mmB)

Lowest indication unit 0.1 mm

Inclination measurement

Measuring range 0°–360°(4x90°)

Measuring accuracy (typical) ±0.2°C)/E)

Lowest indication unit 0.1°

General

Operating temperature –10 °C...+50 °CD)

Storage temperature –20 °C...+70 °C

Relative air humidity, max. 90 %

OBJ_BUCH-2326-003.book Page 27 Thursday, August 20, 2015 8:43 AM

28 | English

1 609 92A 1F3 | (20.8.15) Bosch Power Tools

Laser class 2

Laser type 635 nm, <1 mW

Laser beam diameter (at 25 °C)

approx.

–at10mdistance

–at50mdistance

9mm

45 mm

Automatic switch-off after approx.

–Laser

–Measuringtool

(without measurement)

–Bluetooth® (if inactive)

20 s

5min

3min

Weight according to EPTA-Procedure

01:2014 0.16 kg

Dimensions (length x width x height) 115x50x23mm

Batteries 3x1.5VLR03(AAA)

Battery life, approximately

– Individual measurements

– Continuous measurement

10000E) G)

2.5 hE) G)

Data transmission

Bluetooth®Bluetooth® 4.0 (Classic and Low Energy)F)

A) For measurements from the rear measuring-tool edge.Theworking range increases depending

on how well the laser light is reflected from the surface of the target (scattered, not reflective) and

the brighter the laser point is to the ambient light intensity (interior spaces, twilight). For distances

of less than 20 m a retro-reflective target plate should not be used, as it can lead to measurement

errors.

B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e.g., a

white-painted wall), weak backlight and 25 °C operating temperature. Additionally, a deviation in-

fluence of ±0.05 mm/m must be taken into account.

C) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 °/degree to 45 ° (max.).

D) In the continuous measurement function, the maximum operating temperature is +40 °C.

E) At 25 °C operating temperature

F) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on

model and operating system. Bluetooth® devices must support the SPP profile.

G) Bluetooth® deactivated

The measuring tool can be clearly identified with the serial number 6on the type plate.

Digital Laser Measure PLR 50 C

OBJ_BUCH-2326-003.book Page 28 Thursday, August 20, 2015 8:43 AM

English | 29

Bosch Power Tools 1 609 92A 1F3 | (20.8.15)

Declaration of Conformity

We declare under our sole responsibility that the product described under “Technical

Data” complies with all applicable provisions of the directives 1999/5/EC and

2011/65/EU including their amendments and is in conformity with the following

standards: EN 61010-1: 2010-10, EN 60825-1: 2014-08,

EN 300 328 V1.8.1: 2012-06, EN 301 489-1 V1.8.1: 2008-04,

EN 301 489-1 V1.9.2: 2011-09, EN 301 489-17 V2.2.1: 2012-09,

EN 62479: 2010-09.

Technical documents at:

Robert Bosch GmbH, PT/ETM9,

70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

Leinfelden, 20.08.2015

Product Features

The numbering of the product features shown refers to the illustration of the measur-

ing tool on the graphic page.

1Measuring button/On/Off button

2Touchscreen

3Positioning plate

4Battery lid

5Latch of battery lid

6Serial number

7Laser warning label

8Laser beam outlet

9Reception lens

10 Laser viewing glasses*

11 Laser target plate*

12 Protective pouch

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

OBJ_BUCH-2326-003.book Page 29 Thursday, August 20, 2015 8:43 AM

30 | English

1 609 92A 1F3 | (20.8.15) Bosch Power Tools

Display elements (selection)

aStatus Bluetooth®

bTemperature warning

cBattery indicator

dLaser switched on

eButton for reference level of measurement

fPrevious measured values

gReading

hDelete button

iMenu button

jBluetooth® button

kMeasuring functions button

lHelp function button

mScroll up/down button

nBack button

Bluetooth® activated, no connection established

Bluetooth® activated, connection established

Length measurement

Area/surface measurement

Volume measurement

Addition/subtraction of lengths

Addition/subtraction of areas

Addition/subtraction of volumes

Indirect height measurement

Indirect length measurement

Double indirect height measurement

Inclination Measurement

Digital Spirit Level

Continuous measurement

OBJ_BUCH-2326-003.book Page 30 Thursday, August 20, 2015 8:43 AM

English | 31

Bosch Power Tools 1 609 92A 1F3 | (20.8.15)

oSettings button

pMeasured-value list button

* The accessories illustrated or described are not included as standard delivery.

Assembly

Inserting/Replacing the Batteries

Using alkali-manganese or rechargeable batteries is recommended for operation of

the measuring tool.

Less measurements are possible when using 1.2 V rechargeable batteries than with

1.5 V batteries.

To open the battery lid 4, fold out the positioning plate 3, press the latch 5in the di-

rection of the arrow and remove the battery lid. Insert the batteries/rechargeable bat-

teries. When inserting,payattentiontothecorrectpolarityaccordingtotherepresen-

tation on the inside of the battery compartment.

If the battery symbol first appears in the display, then at least 100measurements

are still possible. When the battery symbol is empty, you have to replace the batter-

ies/rechargeable batteries because measurements are no longer possible.

Always replace all batteries/rechargeable batteries at the same time. Do not use dif-

ferent brands or types of batteries/rechargeable batteries together.

Remove the batteries/rechargeable batteries from the measuring tool when

not using it for longer periods. When storing for longer periods, the batteries/re-

chargeable batteries can corrode and self-discharge.

Operation

Using the Touchscreen

Do not use the measuring tool if the touchscreen is visibly damaged (e.g.

cracks in the surface etc.).

The display is divided into the Status bar (A), Touchscreen

(B) and Menu bar (C) sections.

The status bar shows the Bluetooth® connection status, the

temperature warning and the charging state of the batteries/

rechargeable batteries.

The measuring tool can be controlled by touching the buttons

on the touchscreen.

OBJ_BUCH-2326-003.book Page 31 Thursday, August 20, 2015 8:43 AM

32 | English

1 609 92A 1F3 | (20.8.15) Bosch Power Tools

The menu bar provides additional functions (e.g. Bluetooth® on/off, menu, delete).

Use only your fingers to operate the touchscreen.

Lightly tap the corresponding button. Do not apply high pressure or use sharp ob-

jects to tap the touchscreen.

Do not bring the touchscreen into contact with other electrical devices or water.

To clean the touchscreen, switch the measuring tool off and wipe off dirt using, for

example, a microfibre cloth.

Initial Operation

Do not leave the switched-on measuring tool unattended and switch the mea-

suring tool off after use. Other persons could be blinded by the laserbeam.

Protect the measuring tool against moisture and direct sun light.

Do not subject the measuring tool to extreme temperatures or variations in

temperature. As an example, do not leave it in vehicles for a long time. In case of

large variations in temperature, allow the measuring tool to adjust to the ambient

temperature before putting it into operation. In case ofextreme temperatures or

variations in temperature, the accuracy of the measuring tool can be impaired.

Avoid heavy impact to or falling down of the measuring tool. After severe exte-

rior effects to the measuring tool, it is recommended to carry out an accuracy

check (see “Accuracy Check and Calibration of the Grade Measurement” and “Ac-

curacy Check of the Distance Measurement” on page 40) each time before contin-

uing to work).

Switching On and Off

To switch on the measuring tool, briefly press the measuring button 1. When the

measuring tool is switched on, the laser beam is not yet switched on.

To switch off the measuring tool, press the measuring button 1and hold it down.

If no physical or graphical button is pressed on the measuring tool for approx. 5 min-

utes, the measuring tool will switch off automatically to save the batteries/rechargea-

ble batteries.

All stored valuesare retained when the tool is switched off.

OBJ_BUCH-2326-003.book Page 32 Thursday, August 20, 2015 8:43 AM

English | 33

Bosch Power Tools 1 609 92A 1F3 | (20.8.15)

Measuring Procedure

Once switched on, the measuring tool is in the length measure-

ment function. Other measuring functions can be set by pressing

the kbutton (see “Measuring Functions”, page 34).

Once the measuring tool has been switched on, the rear edge of

the measuring tool is selected as the reference level for measure-

ment. Press the ebutton to change the reference level (see “Se-

lecting the Reference Level”, page 34).

Place the measuring tool with the selected reference plane against the desired start-

ing point of the measurement (e.g. a wall).

To switch on the laser beam, briefly press the measuring button 1.

Do not point the laser beam at persons or animals and do not look into the la-

ser beam yourself, not even from a large distance.

Aim the laser beam at the target surface. To initiate the measurement, briefly press

the measuring button 1again.

In the function continuous measurement, the measurement begins the first time you

press the measuring button 1.

The measured value typically appears within 0.5 seconds and no later than 4 sec-

onds. The duration of the measurement depends on the distance, the lighting condi-

tions and the reflective properties of the target surface.

If no measurement has taken place approx. 20 seconds after sighting, the laser beam

is switched off automatically to save the batteries and the display is dimmed.

Integrated Help Function

Help in the form of an animation is stored in the measuring tool for

each measuringfunction. Firstselect the kbutton andthenthere-

quired measuringfunction.Theanimationshowsyouthedetailed

procedure for the selected measuring function.

The animation can be stopped and started again at any time. You

can scroll forward and back.

OBJ_BUCH-2326-003.book Page 33 Thursday, August 20, 2015 8:43 AM

34 | English

1 609 92A 1F3 | (20.8.15) Bosch Power Tools

Selecting the Reference Level (see figures A – C)

For the measurement, you can select between three different reference planes:

– the rear measuring-tool edge (e.g. when measuring onward from a wall),

–Thepositioningplate3folded out by 180° (e.g. when measuring from a corner),

– The front edge of the measuring tool (e.g. when measuring from a table edge).

To select the reference level, press theebutton and select the required reference lev-

el on the touchscreen. The rear edge of the measuring tool is preset as the reference

level every time the measuring tool is switched on.

Subsequentchangingofthe referencelevel formeasurementsthathavealreadybeen

carried out (e.g. when indicating measuring values in the measured-value list) is not

possible.

“Basic Settings”

To go to the “Basic Settings” menu, press the ibutton and then

the obutton.

Now select the required button to deactivate or to activate the

function. A deactivated setting is shown as a grey symbol, while

an activated setting is shown as a white symbol.

To exit the “Basic Settings” menu, press the nbutton.

Measuring Functions

Simple Length Measurement

Use simple length measurement to measure distances, lengths, heights and clearanc-

es, etc.

Press the kbutton and then select the button for length measurement .

Briefly press the measuring button 1once to switch on the laser and once to measure.

Basic Settings

Inclination Calibration Start

Tone Signals On Off

Bluetooth®OnOff

OBJ_BUCH-2326-003.book Page 34 Thursday, August 20, 2015 8:43 AM

Autres manuels pour PLR50 C

Table des matières

Autres manuels Bosch Instrument de mesure

Bosch

Bosch DLE 150 Connect Manuel utilisateur

Bosch

Bosch PCL 10 Manuel utilisateur

Bosch

Bosch GLM 80 Professional Guide rapide

Bosch

Bosch GLM165-22 Instructions de montage

Bosch

Bosch PLR 40 C Manuel utilisateur

Bosch

Bosch Professional GLM 100-25 C Manuel utilisateur

Bosch

Bosch Professional GLM 50-23 G Manuel utilisateur

Bosch

Bosch LR 1 Manuel utilisateur

Bosch

Bosch vivatmo pro Manuel utilisateur

Bosch

Bosch GLM 30 Manuel utilisateur

Bosch

Bosch KMA 800 Manuel utilisateur

Bosch

Bosch PLL 5 Manuel utilisateur

Bosch

Bosch GRL4000-80CH Instructions de montage

Bosch

Bosch GLM 250 VF Professional Manuel utilisateur

Bosch

Bosch GRL2000-40HV Manuel utilisateur

Bosch

Bosch Professional GLM 30-23 Manuel utilisateur

Bosch

Bosch PLR 30 C Manuel utilisateur

Bosch

Bosch DLE 50 Professional Manuel utilisateur

Bosch

Bosch GOL Professional 20 D Manuel utilisateur

Bosch

Bosch GLM 120 C Professional Manuel utilisateur

Bosch

Bosch DLE 70 Professional Manuel utilisateur

Bosch

Bosch BEA 070 Manuel utilisateur

Bosch

Bosch AdvancedDistance 50C Manuel utilisateur

Bosch

Bosch GLM 30 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur