ZALMAN CNPS6000-Al Manuel utilisateur

User

’’

s Manual

Zalman Tech Co., Ltd.

CNPS6000-Al

CNPS6000-AlCu

CNPS6000-Cu

http://www.zalman.co.kr E-mail:[email protected]

User

’’

s Manual

Zalman’s CNPS6000-Al / 6000-AlCu / 6000-Cu coolers include a new fan assembly

(FB123) with an adjustable bracket and a bigger fan for better cooling performance.

The new fan assembly can be positioned to provide optimal cooling in almost any

motherboard/standard case configuration and allows an additional fan to be installed

for cooling a NP VGA Card.

1. Features

1) Zalman’s CPU Coolers do not generate noise and vibration in Silent Mode.

2) The heat dissipating material of the Flower HeatSink (FHS) is Pure Aluminum or Copper.

3) Separation of the FHS from the CPU fan prevents transfer of the fan's vibration to the CPU.

4) By utilizing a 92mm fan, both the CPU and the motherboard chipset are cooled.

5) The cooling fan can be mounted at any desired location, making it compatible with virtually all

computer cases and motherboards (Note: computer cases that have the power supply covering

the CPU cannot be used).

6) With the included adjustable fan speed connector, the user can freely adjust the CPU fan's RPM.

7) CPU can be cooled to a temperature sufficiently below the temperature required by the CPU

manufacturer in Silent Mode.

8) Zalman’s CPU Coolers enable very stable operation of a CPU in an OVERCLOCKED environment.

* If you try OVERCLOCKING, please make sure that the fan is in Normal Mode.

* Zalman Tech. Co., Ltd. is not responsible for any damage to a system or a CPU caused by CPU

OVERCLOCKING.

2. Components

1) FHS : ZM6558BC-XXXX 2) NP FAN & Bracket : FB123

3) Thermal Grease 4) Screw bolts (Inch-sized/mm-sized bolts)

5) Clip 6)One Adjustable Fan Speed Connector (FAN MATE 1)

7) Heatsink Installation Tool (Clip Mate)

3. Specifications

1) FHS

- 1 -

󳢬

The specifications of any product may change without prior notice to improve the performance thereof.

CNPS6000-Al, CNPS6000-AlCu, CNPS6000-Cu

CNPS6000-Al

ZM6558BC-Al ZM6558BC-AlCu ZM6558BC-Cu

CNPS6000-AlCu CNPS6000-Cu

105~110(L) ×63(W) ×65(H)

2600

Model

Spec.

Part No.

Dimensions (mm)

Dissipating Area (

㎠㎠

)

Base Material

Weight (g)

Thermal

Resistance

(℃/W)

Silent Mode

Normal Mode

Pure Aluminum

+ Pure Copper

Pure Copper

170 270 462

0.37 0.33 0.31

0.29 0.25 0.23

Note 1) The maximum weight for a heatsink is specified as 180 g by Intel(Pentium III) and as 300 g by AMD.

Should a heatsink which exceeds the relevant weight limit be installed in a computer , special care

should be taken when the computer is moved. Zalman Tech. Co., Ltd. is not responsible for any

damage to a system or a CPU occurring when moving a computer with an overweight heatsink.

(1)

- 2 -

󳢬

The specifications of any product may change without prior notice to improve the performance thereof.

2) Fan

①Dimensions : 92(L) X 92(H) X 25(W)mm ②Weight : 85g

③Speed : Silent mode :1300 RPM±10% ④Noise : Silent mode : 20.0dB±10%

Normal mode : 2500 RPM±10% Normal mode : 32.0dB±10%

⑤Bearing Type : 2-Ball

2) FAN MATE 1

①Dimensions : 200(L) X 23(W) X 21(H) mm ②Weight : 20 g

③Speed : Output Voltage : 5V ~ 11 V±2% ④Allowable Wattage : 6W or lower

4. Compatibility of CPU :

Socket 462 - AMD Duron, AMD Athlon, AMD Athlon XP

Socket 370 - INTEL Pentium III, VIA C3

5. Please keep the following in mind for a noiseless computer

1) For a noiseless computer, a Noise Prevention (NP) Power Supply, a NP HDD, a NP CD-ROM and

a NP VGA Card should be used together with this cooler.

2) Zalman affixes a Computer Noise Prevention System (CNPS) Mark to each of its parts and

components used for noiseless computers.

3) For a high-performance NP VGA Card, it is preferable to use a VGA FHS.

4) When buying a new VGA Card, it is recommended to buy a VGA Card without a fan.

6. Patent Applications

◇Korean Patent Application No. 01-11056

◇Patent Applications Pending in over 20 nations around the world, including the U.S., EU, and Japan

Duron Athlon Athlon XP Athlon XP

(T-Bird)

AMD

Up to 1.4

㎓

(1600+)

Up to 1.67

㎓

(2000+)

Up to 1.67

㎓

(2000+)

Up to 2.13

㎓

(2600+)

Over 2.13㎓

(2600+)

Over 2.13㎓

(2600+)

Over 2.13㎓

(2600+)

Up to 1.33㎓

1.4㎓

CPU Type

Model

Supports all

current CPU

Clock speeds

Supports all

current CPU

Clock speeds

Silent mode

Normal mode

Silent mode

Normal mode

Silent mode

Normal mode

CNPS6000-Al

CNPS6000-Cu

CNPS6000-AlCu

INTEL,VIA

Pentium

III,

- 3 -

󳢬

The specifications of any product may change without prior notice to improve the performance thereof.

Installation of FHS

1. Spread the thermal grease thinly onto the CPU core’s

surface that comes in contact with the FHS as shown

in Figure 2.

2. Install the clip across the FHS as shown in Figure 2

3. Hook the short leg of the clip onto the socket first,

then hook the long leg on by pushing the hole in the

leg with the heatsink installation tool or an ordinary

screw driver as shown in Figure 3.

4. If you need to reinstall the FHS, remove the clip by

inserting the heatsink installation tool into the clip’s

hole and pushing outward, as shown in Figure 4.

< Figure 3 > < Figure 4 >

< Figure 2 >

< Figure 1 >

Thermal Grease

Exploded drawing of the product

CPU & Socket

FHS

Clip

Fan

Br123

Fan Fix 1

FB123

}

- 4 -

󳢬

The specifications of any product may change without prior notice to improve the performance thereof.

< Figure 5 >

< Figure 6 > < Figure 7 >

1. As shown in Figure 6, you can freely place the fan and the bracket in any desired location with

the FB123. Therefore, place the fan in an ideal location as shown in Figure 5. You can also place

an additional fan on the FB123 to maximize the cooling of the VGA Card as shown in Figure 7.

2. Screw on the FB123 firmly at the VGA Card slot hole and the expansion slot hole next to it with

the included bolts. (Caution! The included bolts are of two types: inch-sized and mm-sized.

Use the appropriate type for the slot holes.)

Installation of fan bracket

- 5 -

󳢬

The specifications of any product may change without prior notice to improve the performance thereof.

󳣍For more information on this product, visit our homepage at www.zalman.co.kr. 󳣍

1. Connect FAN MATE 1 (adjustable fan speed connector) to the 3-pin connector of a fan as shown

in Figure 8.

2. Connect FAN MATE 1 to the 3-pin CPU fan connector of the mainboard.

3. Turn on the computer after assembly is finished.

4. When booting a computer in which FAN MATE 1 is used, an alarm sound may be generated by

a system monitoring program to indicate that the rotation of the CPU fan is slow. If this happens,

you may turn the speed control knob fully clockwise to increase the fan speed, set “CPU Fan

Detected” to “Disabled” in the BIOS settings, or set the slowest rotation of the CPU fan in the

system monitoring program to less than or equal to 1500RPM.

Note 1) Some mainboards do not boot if the rotation of the CPU fan is below a certain number of

RPM. If the BIOS settings are updated, Silent Mode can be used. For more information on

updating BIOS , please refer to your mainboard manufacturer’s web site.

5. First check what CPU you are using, then check the CPU compatibility list on page 2. When the

speed control knob is turned fully counter-clockwise, the fan speed is minimum and the fan operates

in silent mode. You can select the desired fan speed by turning the knob.

Note 2) FAN MATE 1 has been specifically designed for the fan of this product. Zalman Tech.

Co., Ltd. is not responsible for any damage to systems or CPUs caused by using it with other

types of fans.

Adjusting Fan Speed

3-Pin CPUFan Connector

3-Pin Connector of the Fan

Mainboard

FAN MATE 1

Speed Control Knob

< Figure 8 >

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZALMAN Matériel informatique

ZALMAN

ZALMAN CNPS8700 NT Manuel utilisateur

ZALMAN

ZALMAN CNPS7000C-Cu Manuel utilisateur

ZALMAN

ZALMAN ZM-RF1 Manuel utilisateur

ZALMAN

ZALMAN Z8 Manuel utilisateur

ZALMAN

ZALMAN CNPS8900 Series Manuel utilisateur

ZALMAN

ZALMAN CNPS20X Manuel utilisateur

ZALMAN

ZALMAN ZM-WB4 GOLD Manuel utilisateur

ZALMAN

ZALMAN CNPS10X Quiet Manuel utilisateur

ZALMAN

ZALMAN CNPS7500-Cu LED Manuel utilisateur

ZALMAN

ZALMAN CNPS7000B Series Manuel utilisateur

ZALMAN

ZALMAN RESERATOR1 Manuel utilisateur

ZALMAN

ZALMAN ZM-2HC2 Manuel utilisateur

ZALMAN

ZALMAN FC-ZV9 Manuel utilisateur

ZALMAN

ZALMAN ZM-WB3 Gold Manuel utilisateur

ZALMAN

ZALMAN Reserator 5 Manuel utilisateur

ZALMAN

ZALMAN CNPS20LQ Manuel utilisateur

ZALMAN

ZALMAN ZM500-ST Manuel utilisateur

ZALMAN

ZALMAN CNPS9700 LED Manuel utilisateur

ZALMAN

ZALMAN CNPS9X OPTIMA Manuel utilisateur

ZALMAN

ZALMAN CNPS2005-Plus Manuel utilisateur

ZALMAN

ZALMAN CNPS8000B Manuel utilisateur

ZALMAN

ZALMAN S5 Manuel utilisateur

ZALMAN

ZALMAN CNPS9800 MAX Manuel utilisateur

ZALMAN

ZALMAN CNPS5X PERFORMA Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur