ZALMAN CNPS7700 LED Manuel utilisateur

* Applies to all versions of CNPS7700 LED.

* Please read before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

CNPS7700

Intel Pentium 4

Socket 775 CPU

Grip (S-Type)

Grip (L-Type)

Inner Hole

Grip (L-Type)

Outer Hole

Intel Pentium 4

Socket 478 CPU

AMD Sempron/AMD64 (Athlon 64/Opteron)

Socket 754/939/940 CPU

(English version)

User

’’

s Manual

※

The specifications of any product may change without prior notice to improve performance.

Fan

Clip

Fan Fixing Screw

Grip (S-Type)

Grip (L-Type)

Fan Support Fixing Screw

Fan Support

FHS

1. Features

1) Flower Heatsink (FHS)

CNPS7700-AlCu CNPS7700-Cu

Model

Spec.

Weight (g)

T.R.

(°C/W )

Silent Mo e

Normal Mo e

600(1)

0.28

0.21

136 (L) X 136 (W) X 67 (H)

3,268

918(1)

0.24

0.19

Dimensions

(mm)

Dissipation Area

(

㎠

)

2. Specifications

2) Fan

- Bearing Type : 2-Ball

- Rotation Spee : 1,000 ~ 1,400rpm 10 % (Silent Mo e)

1,400 ~ 2,000rpm 10 % (Low-noise Mo e)

- Noise Level : 20 ~ 25 B 10% (Silent Mo e) - measure at 1m istance from noise source

25 ~ 32 B 10% (Low-noise Mo e) - measure at 1m istance from noise source

3) FAN ATE 2

- Output Voltage : 5V ~ 11V 2 %

- Allowable Power : 6W or lower

Note 1)

The maximum weight for a cooler is specifie as 450g for Intel Socket 775/478 an AMD Socket 754/939/940

Special care shoul be taken when moving a computer equippe with a cooler which excee s the relevant

weight limit. Zalman is not responsible for any amage that occurs when moving a computer.

3. Exploded View

1) Does not generate noise or vibration in Silent Mo e.

2) Pure copper an /or pure aluminum base materials ensure excellent heat issipation.

3) Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), an AMD Sempron / AMD64 (Socket

754/939/940) compatible esign for broa compatibility.

4) The large 120mm fan insi e the FHS maximizes cooling performance by provi ing sufficient airflow

even at slow rotation spee s.

5) The large 120mm fan provi es air flow over a large area, cooling not only the CPU, but the VGA car ,

Northbri ge, FET, an RAM.

6) The high intensity blue LEDs on CNPS7700 LED coolers stay bright even in Silent Mo e.

7) The a justable fan spee controller (FAM MATE 2) enables control of noise an fan performance.

※

The specifications of any product may change without prior notice to improve performance.

󱆍

󱆎

󱆏

❿

❾

❶

❸

❺

❹

❻

❽

❼

󱆌

󱆐

❷

󳣍Korean Patent Application No. 00-54635

󳣍Korean Design Applications Nos. 04-16030 etc.

󳣍Patent Applications pen ing in over 20 nations aroun the worl , inclu ing USA, EU, an Japan

4. Patents

Precautions

1) If excessive force is exerte on the fan, it may malfunction an result in amage to the pro uct an /or the computer.

2) Do not put your finger in the fan while it is running.

3) Keep the pro uct away from chil ren.

4) Check the components list an con ition of the pro uct before installing. If there is any problem, contact the shop

where you purchase it an get a replacement or refun .

N TICE) Zalman Tech Co., Lt . is not responsible for any amages ue to external causes, inclu ing but not

limite to, improper use, problems with electrical power, acci ent, neglect, alteration, repair,

improper installation, or improper testing.

1) Common Components

❶

FHS Assembly (CNPS7700-AlCu/Cu)

❷

Four (4) Grips (2 each for S-Type an L-Type)

❸

Four (4) Bolts (for installing the FHS)

❹

Thermal Grease

❺

Fan Spee Controller (FAN MATE 2)

❻

Double - si e Tape (for installing FAN MATE 2)

❼

Cable for FAN MATE 2

❽

User’s Manual (in English an Korean)

5. Components

2) Components for Intel Pentium 4 (Socket 775)

❾

One (1) Clip Support for Socket 775

❿

One (1) Backplate for Socket 775

󱆌

Four (4) Clip Support Fixing Bolts

Components for Intel Pentium 4 (Socket 478)

󱆍

Two (2) Clip Supports for Socket 478

Components for AMD Sempron / AMD64 (Socket 754/939/940)

󱆎

Two (2) Nipples

󱆏

One (1) Backplate for AMD64

󱆐

One (1) set of Washers

※

The specifications of any product may change without prior notice to improve performance.

CPU Die TD> TC

IHS

10.2mm Motherboar component height restriction

4mm

Grip

Motherboar

Component

Grip

Motherboar Component

Figure 1

Compatible

Figure 2

Not Compatible

Northwood

3.4

68 69.1

2.8A/E, 3.0E 3.2E, 3.4E 520, 530, 540 550, 560

Prescott - 478 Prescott - 775

CPU

TC_MAX

73.2 67.7 72.7

6. Compatible CPUs

1) Intel Pentium 4 - Socket 775/478

All CPUs conforming to Socket 775/478 platform

Cautions)

①No components higher than 39mm (possible examples : PSU, graphics

car , RAM etc.) shoul be present within a 68mm ra ius from the center

of the CPU.

②For Socket 478, as shown in Figure 2, a motherboar that is not compliant

with the "10.2mm Motherboar component height restriction" stan ar ,

intro uce by Intel, may create interference between components an the grip of CNPS7700. Please o not

install the CNPS7700 if this interference is observe .

③For more information, please visit the Zalman website (http://www.zalman.co.kr) an click on the links of

"CNPS7700 Compatible Socket 775 Motherboar s List" an "Compatibility between CNPS7700 an

Socket 478 Pentium 4 Motherboar s".

Notes)

3.4GHz Northwoo , Prescott-478 of 2.8A/E GHz or higher, an Prescott-775 of up to mo el 560 issipate

an exorbitant amount of heat (84W ~ 115W). Refer to the table below an a just the fan spee so that the

CPU-Case temperature (TC) is lower than the maximum CPU-Case temperature

C_MAX

)

※

Har ware monitoring programs report CPU-Die temperature (T

)

as the CPU temperature. CPU-Die temperature (T

) is measure

about 4 ~ 10

℃

higher than CPU-Case temperature (T

) epen ing

on the motherboar an /or BIOS.

Refer to the Zalman website for more information.

2) A D Sempron / A D64 - Socket 754/939/940

All CPUs conforming to Socket 754/939/940 platform

Cautions )

①No components higher than 39mm (possible examples: PSU,

graphics car , RAM etc.) shoul be present within a 68mm

ra ius from the center of the CPU.

②For more information, please visit the Zalman website

(http://www.zalman.co.kr) an refer to “CNPS7700 Compatible Socket

754/939/940 Motherboar s List”

link.

※

The specifications of any product may change without prior notice to improve performance.

Clip Support Fixing Bolt

Socket Lever Hinge

Lever Slot

Socket Lever

Clip Support for Socket 775

Motherboar

Backplate for Socket 775

Backplate Support

CPU (IHS)

Bolt Grip (S-Type)

Grip (S-Type)

Clip Support for

Socket 775

Socket

775

478

754/939/940

Grip

S - Type

L - Type

Hole

Inner Hole

Outer Hole

7. Installation

※

CNPS7700 must be use with a grip specific to

each CPU socket. Refer to the table on the

right to choose the correct grip for use.

1) Intel Pentium 4 - Socket 775

①①Install Clip Support for Socket 775

Align the clip support for socket 775 an the backplate for socket 775 with the mounting holes on the motherboar

an fasten them together using the clip support fixing bolts. The lever slot on the clip support shoul be properly

oriente on the hinge si e of the socket lever when installing.

* The backplate support is use for the convenience of installation. You can remove it if it is not eeme necessary.

②②Apply Thermal Grease

Clean off particles an resi ue from the top of the

CPU then sprea a generous amount of the inclu e

thermal grease thoroughly on top of the CPU.

※Unlike the flat-mille base of the FHS, the top surface of the LGA775 CPU may have minute ips an peaks

causing pockets of non-contact between the FHS an CPU. Please apply a generous amount of thermal grease

on the top of the CPU.

③③Install Grips and Bolts

Interlock the S-type grips with the clip. Insert the two

bolts into the holes of the grips.

④④Place FHS

Set the FHS at the center of the CPU. Screw the bolts

in slightly, then tighten each bolt a few turns at a time while

alternating between the two until the clip support is

completely presse against the grips.

⑤⑤Connect Power (How to use FAN ATE 2)

◆Please refer to FAN MATE 2 Installation an Usage on page 7.

※

The specifications of any product may change without prior notice to improve performance.

②②

Install Clip Supports for Socket 478

Install the clip supports for socket 478 on both si es

of the retention gui e as shown in the iagram.

③③Install Grips and Bolts

Interlock the L-type grips with the clip. Insert the two bolts

into the inner holes of the grips.

④④

Place FHS

Set the FHS at the center of the CPU. Screw the bolts

in slightly, an then tighten each bolt a few turns at a

time while alternating between the two until the clip

supports are completely presse against the grips.

Retention Gui e

Clip Support for Socket 478

󳦈

󳦇

󳦊

⑤⑤Connect Power (How to use FAN ATE 2)

◆Please refer to FAN MATE 2 Installation an Usage on page 7.

Bolt Grip (L-Type)

Inner Hole

Grip (L-Type)

Clip Support for

Socket 478

2) Intel Pentium 4 - 478

①①

Apply Thermal Grease

Clean off particles an resi ue from the top of the

CPU then sprea a thin layer of the inclu e thermal

grease thoroughly on top of the CPU.

CPU (IHS)

※

The specifications of any product may change without prior notice to improve performance.

①①

Fasten Nipples

Place a small washer on the motherboar . Then, put a nipple over it an fasten the nipple until the

Backplate for AMD64 is firmly attache to the motherboar on the opposite si e of the CPU.

* A Retention Gui e is not necessary for installing CNPS7700 on Socket 754/939/940.

③③Install Grips and Bolts

Interlock the L-Type grips with the clip. Insert the two bolts

into the outer holes of the grips.

④④

Place FHS

Set the FHS at the center of the CPU. Screw the bolts

in slightly, an then tighten each bolt a few turns at a

time while alternating between the two until the nipples

are completely presse against the grips.

⑤⑤Connect Power (How to use FAN ATE 2)

◆Please refer to FAN MATE 2 Installation an Usage on page 7.

②②

Apply Thermal Grease

Clean off particles an resi ue from the top of the

CPU then sprea a thin layer of the inclu e thermal

grease thoroughly on top of the CPU.

Bolt Grip (L-Type)

Outer Hole

Grip (L-Type)

Nipple

3) A D Sempron/A D64 - 754/939/940

CPU (Li )

Nipple

Motherboar

Small Washer

Backplate for AMD64

※

The specifications of any product may change without prior notice to improve performance.

Fan Connector

(CNPS7700)

Motherboar

Double-si e Tape

FAN MATE 2

6-Pin Connector

※FAN MATE 2 Installation and Usage

1) Installing FAN MATE 2 on the Insi e of the System 2) Installing FAN MATE 2 on the Outsi e of the System

Connect the appropriate 3-pin connector on the

cable to the motherboar fan hea er an the

CNPS7700’s fan connector.

Pull the 6-pin connector out of the system through

the back an connect it to FAN MATE 2, which

shoul be installe on the case using the inclu e

ouble-si e tape.

◆

When the spee control knob on FAN MATE 2 is turne fully counter-clockwise, the fan operates in Silent Mo e.

Turne fully clockwise, it operates in Normal Mo e. You can select the esire fan spee by turning the knob.

Note) FAN MATE 2 has been specifically esigne for the fan of this pro uct. Zalman Tech Co., Lt . is not

responsible for any amage to systems or CPUs cause by using it with other types of fans.

8. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the CPU cooler.

2) Cautions During Booting

When booting the computer, it may automatically power own after an alarm soun by a system

monitoring program to in icate that the the CPU fan is rotating slowly. If this happens, turn the spee

control knob fully clockwise to increase the fan spee . Then set ‘CPU Fan Detecte ’ to ‘Disable ’ in

BIOS settings, or set the slowest rotational spee of the CPU fan in the system monitoring program to

less than or equal to 900rpm.

Note) Some motherboar s o not boot if the rotational spee of the CPU fan is below a certain

rpm. If the BIOS settings are up ate , Silent Mo e can be use . For more information on

up ating your BIOS, please refer to your motherboar manufacturer's website. Disabling

CPU fan spee etection in BIOS settings oes not affect computer performance.

3) OVERCLOCKING

The fan shoul be set to Normal Mo e if OVERCLOCKING.

(Zalman Tech Co., Lt . is not responsible for any amage resulting from CPU OVERCLOCKING.)

※

The specifications of any product may change without prior notice to improve performance.

When buil ing a noiseless computer, use Zalman’s Noiseless Power Supply, Noiseless Case Fan,

Fanless Northbri ge Cooler, Heatpipe HDD Cooler, Heatpipe VGA Cooler, an Fan Controller to achieve

stable performance an maintain a noiseless environment.

9. Zalman Noise Prevention System

The TNN 500AF is the worl 's first absolutely noiseless, anti-dust computer case for high-en systems that

has been evelope with Heatpipe Technology, HSC (Heat Source Contact) Power Technology, High

Capacity Extrusion Technique, an FMS (Flexible Mounting Structure) Design Technology by ZALMAN

Tech Co., Lt .

The TNN 500AF package inclu es a high performance aluminum computer case with an absolutely

noiseless cooling solution that oes not require the use of a fan, making it i eal for:

1. Digital Audio Workstations (DAW) in broa casting, recor ing, an postpro uction stu io control rooms.

2. ulti edia & Storage Servers for offices, e ucational facilities, an hotels.

3. Home Theater and ulti edia Systems for living rooms.

4. High Performance Noiseless Workstations & Servers for SOHO (Small Office Home Office) systems.

For more information, please visit the Zalman website at www.zalman.co.kr

10. TNN (Totally No Noise) Computer Case

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Heatpipe VGA Cooler Fan Controller

Autres manuels pour CNPS7700 LED

Ce manuel convient aux modèles suivants

Autres manuels ZALMAN Matériel informatique

ZALMAN

ZALMAN CNPS8700 NT Manuel utilisateur

ZALMAN

ZALMAN ZM-WB4 GOLD Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AT Manuel utilisateur

ZALMAN

ZALMAN ZM-RWB1 Manuel utilisateur

ZALMAN

ZALMAN Optima CNPS8X Manuel utilisateur

ZALMAN

ZALMAN CNPS7700 LED Manuel utilisateur

ZALMAN

ZALMAN CNPS17X Manuel utilisateur

ZALMAN

ZALMAN CNPS7000B Series Manuel utilisateur

ZALMAN

ZALMAN FC-ZV9 Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AT Manuel utilisateur

ZALMAN

ZALMAN CNPS7000 Manuel utilisateur

ZALMAN

ZALMAN CNPS5100-Al Manuel utilisateur

ZALMAN

ZALMAN CNPS6000-Al Manuel utilisateur

ZALMAN

ZALMAN CNPS9700 LED Manuel utilisateur

ZALMAN

ZALMAN ZM-WB5 Plus Manuel utilisateur

ZALMAN

ZALMAN CNPS9900 Max Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AM2 Manuel utilisateur

ZALMAN

ZALMAN CNPS10X Flex Manuel utilisateur

ZALMAN

ZALMAN AMD Athlon 64 Socket 754 CPU Manuel utilisateur

ZALMAN

ZALMAN ZM80D-HP Manuel utilisateur

ZALMAN

ZALMAN CNPS14X Manuel utilisateur

ZALMAN

ZALMAN CNPS7000C Series Manuel utilisateur

ZALMAN

ZALMAN ZM-RF1 Manuel utilisateur

ZALMAN

ZALMAN CNPS9900 Max Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur