ZALMAN CNPS8000A Manuel utilisateur

User’s Manual

CNPS8000A

www.ZALMAN.com

Ver. 1.1

To ensure safe and easy installation,

please read the following precautions.

Intel Socket 1366 / 1156 / 775 CPU

Core i7 Extreme

Core i7

Core i5

Core i3

Core 2 Quad

Core 2 Duo

Core 2 Extreme

Dual Core Pentium

Pentium D

Pentium 4

Celeron D

AMD Socket AM3 / AM2+ / AM2 CPU

Phenom II

Phenom

Athlon II

Athlon X2

Athlon FX

Athlon

Dual-Core Opteron

Sempron

1.COM

1. Precautions

2. Speciﬁcations

1) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes.

If contact is made with skin, wash off with water. If ingested or irritation

persists, seek medical attention.

2) To prevent possible injuries, gloves must be worn while handling this product.

3) Excessive force exerted on the fan may cause damage to the fan and/or

system.

4) Use and keep product away from reach of children and pets.

5) Check the components list and condition of the product before installation. If

any problem is found, contact the retailer to obtain a replacement.

6) Zalman Tech Co., Ltd. is not responsible for any damages due to

overclocking.

7) During transportation of the system, the cooler must be removed. Zalman is

not responsible for any damages that occur during the transport of a system.

8) Product design and specifications may be revised to improve quality and

performance.

3. Installation Requirements

The cooler’s installation requires

an unobstructed space of 108㎜

(width), 108㎜(height), and 69㎜

(depth), with the CPU as a central

reference point. Please check if

components such as ODDs and

PSU interfere with the required

space.

Model

Spec. CNPS8000A

Materials Pure Copper, Aluminum

Weight 330g

Dimensions 108(L) Ⅹ108(W) Ⅹ66(H)㎜

Fan

Bearing 2 Ball-Bearing

RPM w/ Fan Mate 2 1,400 ~ 2,600rpm ±10%

w/o Fan Mate 2 2,800rpm ±10%

Noise Level 20 ~ 30dBA ±10%

Input Voltage 12V

Fan

Mate 2

Output Voltage 5 ~ 11V ±2%

Max Capacity less than 6W

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to

external causes, including but not limited to, improper use, problems

with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

108㎜

69㎜

108㎜

2.COM

4. Components

1) Common Components

Thermal Grease

Loading Block

Side Caps Nuts

Double-sided Tape

Backplate

User’s Manual

Cooler

AMD Clip

Intel Clip

2) Intel Components 3) AMD Components

Socket 775 / 1156 / 1366 Socket AM3 / AM2+ / AM2

Fan Mate 2 CableFan Mate 2 Double-sided Tape

Thermal Grease

3.COM

5. Installation

1) Intel Socket 1366 / 1156 / 775 Installation

②Install Bolts to the Backplate according to the Socket Type and secure

with Side Caps.

Socket 775

Socket 1156

Socket 1366

Take note of the orientation of the Nuts and the Side Caps.

Caution

①Insert the Intel Clip between the Cover and the Base, and then fasten

the Bolts.

③- ⓐSocket 775 Installation

Remove the Sticker Cover from the Lower Tier of the Loading Block

and attach to the Backplate.

Loading Block

4.COM

Caution

Please make note of the orientation of the Loading Block’s Installation.

③- ⓑSocket 1366 / 1156 Installation

Attach Double-sided Tape to the center of the Backplate and remove the

Double-sided Tape’s Cover.

※Socket 1366 / 1156 Installation does not require the Loading Block.

Attach Double-sided Tape to the Loading Block and remove the Double-

sided Tape Cover.

④Align the Backplate’s Nuts with the motherboard’s Clip Support’s installation

holes and fasten to the motherboard.

Motherboard

Double-sided Tape

5.COM

⑤Apply the enclosed Thermal Grease to the CPU’s surface and install the

Cooler by fastening the Bolts.

2) AMD Socket AM3 / AM2+ / AM2 Installation

①Insert the AMD A Clip between the Cover and the Base, and then fasten

the Bolts.

Motherboard

②Install Bolts to the Backplate according to the Socket Type and secure

with Side Caps.

Take note of the orientation of the Nuts and the Side Caps.

Caution

6.COM

③Remove the Sticker Cover from the Lower Tier of the Loading Block and

attach to the Backplate.

Caution

Take note of the orientation of the Nuts and the Side Caps.

Attach Double-sided Tape to the Loading Block and remove the Double-

sided Tape Cover.

④Disassemble the motherboard’s Clip Support.

Motherboard

Double-sided Tape

Loading Block

7.COM

⑤Apply the enclosed Thermal Grease to the CPU’s surface and install the Cooler

by fastening the Bolts.

④Align the Backplate Nuts with the

motherboard’s Clip Support installation

holes and fasten to the motherboard.

Motherboard

①Connect the motherboard and

Fan Cable to the Fan Mate 2 as

shown in the diagram below.

②Fan Mate 2 can be installed to the

side of the case using Double-

sided Tape.

Motherboard

Fan Connector (Cooler)

Double-sided Tape

6. Fan Mate 2 Installation and Usage

1) Fan Mate 2 Installation

8.COM

2) Fan Mate 2 Usage

Rotating the Fan Speed Control

Knob for RPM control.

Fan Speed Control Knob

In case you get a BIOS error beep:

①Rotate the Fan Speed Control Knob to its maximum setting.

②Disable CPU Fan Detected in BIOS setting or set the system monitoring

program’s CPU Fan RPM to the lowest setting.

※Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this

case, inquire to the motherboard’s manufacturer for additional details.

BIOS booting error

Table des matières

Autres manuels ZALMAN Matériel informatique

ZALMAN

ZALMAN CNPS7000B-AlCu Manuel utilisateur

ZALMAN

ZALMAN CNPS9X OPTIMA Manuel utilisateur

ZALMAN

ZALMAN CNPS 8000 Manuel utilisateur

ZALMAN

ZALMAN CNPS10X Flex Manuel utilisateur

ZALMAN

ZALMAN ZM-2HC2 Manuel utilisateur

ZALMAN

ZALMAN CNPS14X Manuel utilisateur

ZALMAN

ZALMAN ZM-WB5 Plus Manuel utilisateur

ZALMAN

ZALMAN VF900-Cu Manuel utilisateur

ZALMAN

ZALMAN ZM80D-HP Manuel utilisateur

ZALMAN

ZALMAN CNPS9700 LED Manuel utilisateur

ZALMAN

ZALMAN CNPS9700 LED Manuel utilisateur

ZALMAN

ZALMAN CNPS6500B-AlCu Manuel utilisateur

ZALMAN

ZALMAN OPTIMA II CNPS10X Manuel utilisateur

ZALMAN

ZALMAN CNPS7000 Manuel utilisateur

ZALMAN

ZALMAN CNPS10X Extreme Manuel utilisateur

ZALMAN

ZALMAN RESERATOR1 Manuel utilisateur

ZALMAN

ZALMAN Reserator 5 Manuel utilisateur

ZALMAN

ZALMAN CNPS7000B Series Manuel utilisateur

ZALMAN

ZALMAN ZM-RF1 Manuel utilisateur

ZALMAN

ZALMAN CNPS11X Extreme Manuel utilisateur

ZALMAN

ZALMAN RESERATOR1 V2 Guide de démarrage rapide

ZALMAN

ZALMAN CNPS9500 AM2 Manuel utilisateur

ZALMAN

ZALMAN CNPS6000-Al Manuel utilisateur

ZALMAN

ZALMAN CNPS8000B Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur