WIKA SA-11 Manuel utilisateur

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Druckmessumformer für die sterile Verfahrenstechnik Typ SA-11

Examples pressure transmitter model SA-11

Pressure transmitter for sanitary applications model SA-11

Transmisor de presión para procesos estériles modelo

SA-11

Transmetteur de pression pour applications stériles type SA-11

2WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta posterior!

Operating instructions model SA-11 Page 3 - 24

Betriebsanleitung Typ SA-11 Seite 25 - 46

Mode d'emploi type SA-11 Page 47 - 68

Manual de instrucciones modelo SA-11 Página 69 - 91

3WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

1. General information 4

2. Safety 7

3. Specications 9

4. Design and function 14

5. Transport, packaging and storage 14

6. Commissioning, operation 15

7. Setting of zero point and span 19

8. Maintenance and cleaning 22

9. Faults 23

10. Dismounting, return and disposal 24

Contents

Declarations of conformity can be found online at www.wika.com.

4WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

1. General information

■

The pressure transmitter described in these operating instructions has been designed and manufactured using

state-of-the-art technology. All components are subject to stringent quality and environmental criteria during produc-

tion. Our management systems are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument.Working safely requires that

all safety instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range

of use.

■

The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and

readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended

use, non-compliance with these operating instructions, assignment of insuciently qualied skilled personnel or

unauthorised modications to the instrument.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.80

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

[email protected]

1. General information

5WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

1. General information

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or damage to property or the

environment, if not avoided.

Information

... points out useful tips, recommendations and information for ecient and trouble-free operation.

CAUTION!

... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids, if

not avoided.

Abbreviations

2-wire The two connection leads are used for the voltage supply.

The measuring signal also provides the supply current.

3-wire Two connection leads are used for the voltage supply.

One connection lead is used for the measuring signal.

U+Positive power supply terminal

U-Reference potential

S+Analogue output

6WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

2. Safety

WARNING!

Before installation, commissioning and operation, ensure that the appropriate pressure transmitter has

been selected in terms of measuring range, design and specic measuring conditions.

Non-observance can result in serious injury and/or damage to property.

WARNING!

■

Open the connections only after the system has been depressurised.

■

Observe the operating parameters in accordance with chapter 3 “Specications”.

■

Always operate the pressure transmitter within the overpressure limit.

Further important safety instructions can be found in the individual chapters of these operating

instructions.

2.1 Intended use

The model SA-11 pressure transmitter is designed especially for the requirements of the food and beverage,

pharmaceutical and biotechnology industries.

The model SA-11 pressure transmitter is particularly suitable for the special conditions of CIP/SIP cleaning processes,

such as chemical stability towards cleaning liquids and high temperatures. The ush metal measuring cell is directly

welded to the process connection.This guarantees a crevice-free joint between the process connection and the

measuring cell, additional sealings are not required.

The instrument has been designed and built solely for the intended use described here, and may only be used accor-

dingly. The technical specications contained in these operating instructions must be observed. Improper handling or

operation of the pressure transmitter outside of its technical specications requires the instrument to be taken out of

service immediately and inspected by an authorised WIKA service engineer.

The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.

2.2 Compliance with 3-A conformity

For a 3-A-compliant connection the following sealings have to be used:

For milk thread ttings per DIN 11851, suitable prole sealings have to be used (e.g. SKS Komponenten BV or Kiesel-

mann GmbH).

For ttings per IDF sealings with support ring per ISO 2853 have to be used.

Note: Connections per SMS, APV RJT and NEUMO Connect S are not 3-A-compliant.

7WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

2. Safety

2.3 Compliance with EHEDG conformity

For an EHEDG-compliant connection, sealings in accordance with the current EHEDG policy document must be used.

Sealings for connections per ISO 2852, DIN 32676 and BS 4825 part 3 are, e.g., manufactured by Combit

International B.V.

A manufacturer of sealings for connections per DIN 11851 is, e.g., Kieselmann GmbH.

A manufacturer of VARINLINE®sealings is, e.g., GEA Tuchenhagen GmbH.

A manufacturer of NEUMO BioConnect®sealings is, e.g., NEUMO GmbH & Co. KG.

2.4 Personnel qualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and damage to property.

The activities described in these operating instructions may only be carried out by skilled personnel who

have the qualications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement

and control technology and on their experience and knowledge of country-specic regulations, current standards and

directives, are capable of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

2.5 Special hazards

WARNING!

For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids, and refrigeration

plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or

regulations must also be followed.

8WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

WARNING!

Residual media at the dismounted pressure transmitter can result in a risk to persons, the environment

and equipment.

Take sucient precautionary measures.

Do not use this instrument in safety or emergency stop devices. Incorrect use of the instrument can result

in injury.

Should a failure occur, aggressive media with extremely high temperature and under high pressure or

vacuum may be present at the instrument.

2.6 Labelling / Safety marks

Product label

If the serial number and the 2D code become illegible due to mechanical damage or overpainting, traceability will no

longer be possible.

Output signal

Pin assignment

Supply voltage

Serial number

Measuring range

2D code

Approvals

Article number

2. Safety

9WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

3. Specications

3. Specifications

Accuracy specications

Non-linearity per BFSL (per IEC 61298-2) ≤ 0.2 % of span

Accuracy 1)

■

≤ 0.5 % of span

■

≤ 0.25 % of span

Mean temperature coecients at 0 ... 80 °C [32 ... 176 °F]

Zero point Measuring range 0 ... 0.6 bar to 0 ... 25 bar ≤ 0.2 % of span / 10 K

Measuring range 0 ... 0.4 bar ≤0.25 % of span / 10 K

Measuring range 0 ... 0.25 bar ≤0.,4 % of span / 10 K

Span ≤ 0.2 % of span / 10 K

Long-term stability (per DIN 16086) ≤ 0.2 % of span/year

Adjustability of zero point, span Adjustment is made using potentiometers inside the instrument.

Not possible for IP68 cable outlet.

Non-repeatability (per IEC 61298-2) ≤ 0.1 % of span

Mounting position inuence Calibrated in vertical mounting position with process connection facing downwards.

1) Including non-linearity, hysteresis, zero oset and end value deviation (corresponds to measured error per IEC 61298-2), calibrated in vertical mounting position

with process connection facing downwards.

Measuring ranges, gauge pressure

Measuring range

bar psi

0 ... 0.25 0 ... 5

0 ... 0.4 0 ... 10

0 ... 0.6 0 ... 15

0 ... 1 0 ... 30

0 ... 1.6 0 ... 60

0 ... 2.5 0 ... 100

0 ... 4 0 ... 160

0 ... 6 0 ... 200

0 ... 10 0 ... 300

0 ... 16

0 ... 25

Measuring ranges, absolute pressure

Measuring range

bar abs. psi abs.

0 ... 1 0 ... 15

0 ... 1.6 0 ... 25

0 ... 2.5 0 ... 50

0 ... 4 0 ... 100

0 ... 6 0 ... 250

0 ... 10

0 ... 16

10 WIKA operating instructions pressure transmitter, model SA-11

12142425.02 06/2021 EN/DE/FR/ES

3. Specications

Vacuum and +/- measuring ranges

Measuring range

bar psi

-1 ... 0 -30 inHg ... 0

-1 ... +0.6 -30 inHg ... +30

-1 ... +1

-1 ... +2

-1 ... +3

-1 ... +4

-1 ... +5

-1 ... +9

-1 ... +10

-1 ... +15

Further details on: Measuring ranges

Special measuring ranges See product label

Unit

■

bar

■

psi

■

bar abs.

■

psi abs.

Overpressure limit

Measuring ranges ≤ 6 bar 4 times

Measuring ranges 10 bar and 16 bar 3 times

Measuring range 25 bar 2 times

Vacuum resistance Vacuum-resistant to -1 bar

Autres manuels pour SA-11

Table des matières

Langues :

Autres manuels WIKA Émetteur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur