WIKA E-10 Manuel utilisateur

Operating instructions

Betriebsanleitung

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30

63911 Klingenberg/Germany

Tel +49 9372 132-8976

Fax +49 9372 132-8008976

[email protected]

www.wika.de

E-10, E-11

E-10 E-11

Pressure transmitter

Druckmessumformer

11116552.09 EN/DE 05/2016

2WIKA Operating instructions, E-10, E-11

Operating instructions, model E-1x Page 3 - 28

Betriebsanleitung, Typ E-1x Seite 29 - 53

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

11116552.09 EN/DE 05/2016

3WIKA Operating instructions, E-10, E-11

Content

1. Important details for your information.......................................4

2. Signs, symbols and abbreviations ..........................................6

3. Function ................................................................7

4. For your safety ..........................................................8

5. Packaging ..............................................................9

6. Starting, operation ......................................................10

7. Maintenance, accessories ................................................20

8. Trouble shooting ........................................................20

9. Storage, disposal .......................................................23

Appendix 1: EU declaration of conformity......................................24

Appendix 2: EU-type examination certificate ...................................25

11116552.09 EN/DE 05/2016

4WIKA Operating instructions, E-10, E-11

1. Important details for your information

Read these operating instructions before installing and starting the pressure transmitter. Keep

the operating instructions in a place that is accessible to all users at any time.

The following installation and operating instructions have been compiled by us with great care

but it is not feasible to take all possible applications into consideration.These installation and

operation instructions should meet the needs of most pressure measurement applications. If

questions remain regarding a specic application, you can obtain further information:

■

Via our Internet address www.wika.de / www.wika.com

■

The product data sheet is designated as PE 81.27

■

Contact WIKA for additional technical support +49 9372 132-8976

If the serial number on the product label and/or the 2D code on the hexagon gets illegible (e.g. by

mechanical damage or repainting), the retraceability of the instrument is not possible any more.

WIKA pressure transmitters are carefully designed and manufactured using state-of-the-art

technology. Every component undergoes strict quality and environmental inspection before

assembly and each instrument is fully tested prior to shipment. Our environmental management

system is certied to DIN EN ISO 14001.

1. Important details for your information

11116552.09 EN/DE 05/2016

5WIKA Operating instructions, E-10, E-11

1.1 Intended use E-10, E-11:

Use the pressure transmitter with ameproof enclosure to transform pressure into an electrical

signal in gas hazardous areas, zones 1 and 2.

ATEX und IECEx approval

Pressuremeasuring instrument approved for use in gas hazardous areas, type tested in

accordance with the following standards:

■

EN 60079-0 / IEC 60079-0

■

EN 60079-1 / IEC 60079-1

ATEX Approval ratings: Flameproof enclosure II 2G Ex db IIC T6...T1 Gb (KEMA 05 ATEX 2240 X)

IECEx Approval ratings: Flameproof enclosure Ex db IIC T6...T1 Gb (IECEx DEK 15.0048X)

1.2 Knowledge required

Skilled personnel are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and knowledge of

country-specic regulations, current standards and directives, are capable of carrying out the

work described and independently recognising potential hazards.

It has to be acquainted with the rules and regulations on hazardous areas and electric circuits,

since this transducer is „electrical equipment“ as dened by EN 60079-14.

Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

1. Important details for your information

11116552.09 EN/DE 05/2016

6WIKA Operating instructions, E-10, E-11

2. Signs, symbols and abbreviations

WARNING

Potential danger of life or of severe injuries.

WARNING

Instructions for hazardous areas: Potential danger of life or of severe injuries.

CAUTION

Potential danger of burns due to hot surfaces.

Notice, important information, malfunction.

The product complies with the applicable European directives.

Before mounting and commissioning the instrument, ensure you

read the operating instructions!

2. Signs, symbols and abbreviations

11116552.09 EN/DE 05/2016

7WIKA Operating instructions, E-10, E-11

The product complies with the requirements of the European directive (ATEX) on

explosion protection.

2-wire Two connection lines are intended for the voltage supply.

The supply current is the measurement signal.

3-wire Two connection lines are intended for the voltage supply.

One connection line is intended for the measurement signal.

3. Function

E-10: Pressure connection with internal diaphragm (standard version).

E-11: Pressure connection with ush diaphragm or highly viscous or solids entrained media

which might clog the pressure port.

Function

The pressure prevailing within the application is transformed into a standardised electrical signal

through the deection of the diaphragm, which acts on the sensor element with the power supply

fed to the transmitter.This electric signal changes in proportion to the pressure and can be evalu-

ated correspondingly.

2. Signs, symbols and abbreviations / 3. Function

11116552.09 EN/DE 05/2016

8WIKA Operating instructions, E-10, E-11

4. For your safety

WARNING

■

Select the appropriate pressure transmitter with regard to scale range, perfor-

mance and specic measurement conditions prior to installing and starting the

instrument.

■

Observe the relevant national regulations and observe the applicable

standards and directives for special applications (e.g. with dangerous media

such as acetylene, ammable gases or liquids and toxic gases or liquids and

with refrigeration plants or compressors). If you do not observe the appropriate

regulations, serious injuries and/or damage can occur!

■

Open pressure connections only after the system is without pressure!

■

Please make sure that the pressure transmitter is only used within the overload

threshold limit all the time!

■

Observe the ambient and working conditions outlined in section 6 table „Speci-

cations”.

■

Ensure that the pressure transmitter is only operated in accordance with the

provisions i.e. as described in the instructions.

■

Do not interfere with or change the pressure transmitter in any other way than

described in these operating instructions.

■

Remove the pressure transmitter from service and mark it to prevent it from

being used again accidentally, if it becomes damaged or unsafe for operation.

■

Take precautions with regard to remaining media in removed pressure transmit-

ter. Remaining media in the pressure port may be hazardous or toxic!

■

Have repairs performed by the manufacturer only.

4. For your safety

11116552.09 EN/DE 05/2016

9WIKA Operating instructions, E-10, E-11

WARNING

Consider the details given in the EC-type examination certicate and specic

conditions of use as well as the respective country specic regulations for installa-

tion and operation in hazardous areas (e.g.: IEC 60079-14). If you do not observe

these stipulations, serious injuries and/or damage can occur.

5. Packaging

Has everything been supplied?

Check the scope of supply:

■

Completely assembled pressure transmitters; with ush version E-11 including

pre-assembled sealings and plastic protection cap.

■

Inspect the pressure transmitter for possible damage during transportation.

Should there be any obvious damage, inform the transport company and WIKA

without delay.

■

Keep the packaging, as it oers optimal protection during transportation (e.g.

changing installation location, shipment for repair).

■

Ensure that the pressure connection thread and the connection contacts will

not be damaged.

4. For your safety / 5. Packaging

11116552.09 EN/DE 05/2016

10 WIKA Operating instructions, E-10, E-11

6. Starting, operation

6.1 Diaphragm test for your safety

Required tools: wrench (ats 27), screw driver

It is necessary that before starting the pressure transmitter you test the diaphragm, as this is a

safety-relevant component.

WARNING

■

Pay attention to any liquid leaking out, for this points to a diaphragm damage.

■

Check the diaphragm visually for any damage (E-11).

■

Use the pressure transmitter only if the diaphragm is undamaged.

■

Use the pressure transmitter only if it is in a faultless condition as far as the

safety-relevant features are concerned (e.g. no damage of case, cable and

connection threads. Otherwise explosion protection is not ensured).

In order to protect the diaphragm, the pressure connection of the instrument E-11 is provided

with a special plastic protection cap.

■

Remove this plastic protection cap only just before installing the pressure trans-

mitter in order to prevent any damage to the diaphragm or the thread.

■

Keep the plastic protection cap of the pressure connection thread and the

diaphragm for later storage or transport.

■

Mount the plastic protection cap when removing and transporting the instru-

ment.

5. Packaging / 6. Starting, operation

Autres manuels pour E-10

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur